Item No. Description of Items Unit Qty Rate in Figures (Rs) Rate in Words Amount (Rs.)1.3 1600A, 415V, 50Hz SHORE POWER SWITCH BOARDDesign, Fabrication, Supply, Installation, Testing and Commissioning of415V, 3 phase and neutral, 1600A, 50Hz. free standing floor mountingpedestal type, dust & vermin proof, wheather proof & outdoor duty, totallyenclosed cubicle type enclosure (IP 54) powder coated Switchboard withkioskas per detailed scope work, technical specification and drawingsattached in <strong>tender</strong> enquiry. The switchboard shall be with busbar chamberand consists of one number of 1600A, 4Pole, 50kA, Electrical Draw Outtype ACB with microprocessor based adjustable overcurrent and earthfau<strong>lt</strong>release, indication lamps, meters etc. as per drawing and technicalspecification. Switchboard shall be fabricated using 2 mm MS sheet andhave necessary cable alley & bus bar chamber with extended cable chambersuitable <strong>for</strong> temporary comnnection of cable ect. The rate shall included thecost <strong>for</strong> supply and fixing MS channel (minium 100 x 50 x 6mm) support,cutting the existing chequred plate provided over the trench, painting usingepoxy paint etc.Refer scope of work, technical specification and drawing no.DP 564 DRG EL 01 008 <strong>for</strong> details.The switchboard consists of following major components:1600A, FP, 50kA, Electrical Draw Out type ACB with microprocessor basedadjustable overcurrent and earthfau<strong>lt</strong> release - 1 No.RYB indication lamp, LED type - 3 Nos.(0-500)V vo<strong>lt</strong>meter, Acc. class 1 with 90 deg defl. scale - 1 no.(0-1600)A ammeter Acc. class 1 with 90 deg defl. scale - 1 no.6A 3 pole Ammeter selector switch - 1 no.6A 3 pole vo<strong>lt</strong>meter selector switch - 1 no.1600/5A 15VA class 1 resin cast CT - 1 set1.3.1 Supply No 45
Item No. Description of Items Unit Qty Rate in Figures (Rs) Rate in Words Amount (Rs.)1.3.2 Installation, Testing and commissioning No 42.0 CABLES AND CABLINGSupply, laying, fixing, end termination with double compression brass glandand heavy duty copper lugs, testing and commissioning of following cablesfrom LT panel in the substation to the MV switch board installed in the Quay3 through cable trenches, man holes, ducts as per the scope of work anddrawing no. DP 564 DRG EL 01 001 and DP 564 DRG EL 01 012. (Glandearthing to the nearest earth conductor also included).2.1 3.5C x 300 SQ.MM, 1.1 kV grade XLPE insulated and PVC sheathed,armoured Aluminium conductor power cable con<strong>for</strong>ming to IS 7098 Part1as amended upto date.2.1.1 Supply m 105002.1.2 Laying and fixing m 105002.1.3 Termination including Gland earthing2.1.3.1 Supply No. 1302.1.3.2 Installation No. 1306