Solar Charge Controllers 1.pdf - OkSolar.com

More documents

Recommendations

Info

C H A R G E C O N T R O L L E R S / R E G U L A T O R S43RV Power Products Solar Boost TMThe Solar Boost TM PV charge controllers utilize a patented Maximum Power Point Tracking (MPPT) charging algorithm that allowsthe controller to get up to 30% more power out of your solar modules under certain conditions (low battery voltage and cooltemperatures). The Solar Boost 50, 3048 and 6024H have an automatic 3-stage battery control system. This controller also has apulse width modulated (PWM) control configuration. As an option the controller has a digital display that shows battery voltage,solar current, output charge current, charge mode and state of charge. The remote panel can be mounted on the front of thecontroller or up to 300 feet away. The SB50 can be set up to charge a 12 volt battery from a 24 volt array, while the SB3048 can beset up to charge a 24 volt battery from a 48 volt array. The SB6024H must use a 36 volt or 48 volt array to charge a 12 volt or 24 voltbattery. This can reduce your PV-to-battery wire size. SB50, 3048 and 6024H are listed to UL1741, CSA standards, and are CE labeledfor sales in the European Union. 36 month warranty.Solar Boost 50 Solar Boost 3048 Solar Boost 2000E Solar Boost 6024HOutput Current Rating (Amps) 50.0 30.0 25.0 60.0System Voltage (Volts) 12/24 24/48 12 12/24Standby Current (Milliamps) 30.0 30.0 17.0 30.0Charge On Current (Milliamps) 12/24 - 150.0/90.0 24/48 - 100.0/70.0 70.0 12/24 - 150.0/90.0Power Conversion Efficiency 97%@40A 97%@25A 95%@15A 96%@50APV Maximum Open Circuit Voltage (Volts) 57 140 30 140Acceptance Voltage Adjust Range (Volts) 13-16/26-32 26-32/52-64 13-16 13-16/26-32Cabinet Dimensions (H x W x D) (in) 10.0 x 8.75 x 3.5 10.0 x 8.75 x 3.5 4.63 x 6.38 x 1.88 10.0 x 8.75 x 3.5Remote Display Dimensions (H x W x D) (in) 4.5 x 4.5 x 1.75 4.5 x 4.5 x 1.75 N/A 4.5 x 4.5 x 1.75Product Name and DescriptionPartNumberPriceSB50L - 12/24V Controller 33743 $419.00SB50DL - Controller with display 33755 $499.00SB50PDL - Front panel display 33738 $115.00SB2000E - 12V Controller 33745 $229.00SB2000E Wall Mount Box 33744 $28.00SB3048L - 24/48V Controller 33742 $479.00SB3048DL - Controller with display 33749 $559.00SB3048PDL - Front panel display 33737 $115.00SB6024HL - 12/24V Controller 33739 $509.00SB6024HDL - Controller wth display 33756 $589.00SB6024PDL - Front panel display 33758 $115.00SB50RD25 - Remote display, 25’cable, for SB50, 3048 and 6024H33747 $109.0020’ Battery Temperature Sensor 33741 $28.00SB50DLSB2000E10th Edition • Solar Electric Products Catalog • March 2003
44C H A R G E C O N T R O L L E R S / R E G U L A T O R SMPPT Charge ControllerThe OutBack MX60 Maximum Power Point Tracking (MPPT) charge controller enables yourPV system to achieve its highest possible performance. Rated for up to 60 amps of DCoutput current, the MX60 can be used with battery systems from 12 to 60 VDC with PVopen circuit voltage as high as 125 VDC.The MX60’s set points are fully adjustable to allowuse with virtually any battery type, chemistry and charging profile.The MX60 allows you touse a higher output voltage PV array with a lower voltage battery.This reduces wire sizeand power loss from the PV array to the battery / inverter location and can maximize theperformance of your PV system.The MX60 comes standard with an easy to use and understand display of the PV system’sperformance.The four line, 80 character, back-lit LCD display is also used for programmingand monitoring of the system’s operation.OutBack MPPT Charge ControllerThe MX60 can also be connected to the OutBack MATE system controller and display toallow monitoring of up to eight MX60 controllers from a location up to 1000 feet away.TheMATE also includes an opto-isolated RS232 port for connection to a PC for data loggingand system monitoring. See page 84 for more information on the MATE.MX60Model NumberMX60Part Number 55295Price $649.00Output Current Rating60.0 Amps DC Maximum at 12, 24, or 48 VDCNominal Battery Voltage12, 24, 32, 36, 48, 54, or 60 VDCPV Maximum Open Circuit Voltage125 VDCStandby Power ConsumptionLess than 1 Watt typicalCharging Regulation MethodsFive Stage: Bulk, Absorption, Float, Silent, EqualizationCharging Regulation Set Points13 - 80 VDCEqualization VoltageAdjustable 1.0 to 5.0 VDC above Bulk SetpointTemperature compensationProgrammable slope -2.0mV/oC/Cell to -5.0mV/oC/CellVoltage Step-Down CapabilityCan change a 12 or 24 VDC battery from a 48V nominal PV arrayPower Conversion Efficiency99.1%@40A, 97.3%@60ADigital Display4 line 80 character backlit LCD DisplayRemote InterfaceRJ45 Modular Connector CAT 5 Cable 8 wireOperating Temperature Range-40 to 60 o C Power derated above 25 o CEnvironmental Rating Indoor Type 1Conduit KnockoutsTwo 3/4 - 1” on the back; One 1” - 1 1/2” on each side; Two 1” 1/2” on the bottomWarrantyTwo years parts and labor / optional extended warrantyDimensions (HxWxD) (in) Enclosure: 14.5 x 5.75 x 5.75 / Shipping Box: 17.75 x 10 x 7Shipping Weight (lbs.) 15.0OutBack Charge Controller AccessoryProduct Name and DescriptionPartNumberShippingWeight (lbs.)PriceRTS - Outback Remote Temperature Sensor w/ 20’ cable 55300 1.0 $29.0010th Edition • Solar Electric Products Catalog • March 2003
Page 5: 42C H A R G E C O N T R O L L E R S
Page 9 and 10: 46C H A R G E C O N T R O L L E R S

Solar Charge Controllers 1.pdf - OkSolar.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?