13.07.2015 Views

MSDS - Diamond Glacier - Absorbent Products Ltd

MSDS - Diamond Glacier - Absorbent Products Ltd

MSDS - Diamond Glacier - Absorbent Products Ltd

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>MSDS</strong> – <strong>Diamond</strong> <strong>Glacier</strong> Ice Melter 2INGESTION:INHALATION:Do not induce vomiting. Give large amounts of water or milk ifavailable and transport to medical facility.Remove to fresh air if effects occur. Consult a physician.E. FIRE FIGHTING MEASURES:FLAMMABLE PROPERTIES :Non-flammable by WHMIS criteria.FLAMMABILITY LIMITS: LFL: Not Applicable UFL: Not Applicable.HAZARDOUS COMPOSITIONPRODUCTS:EXTINGUISHING MEDIA:FIRE FIGHTING INSTRUCTIONS:PROTECTIVE EQUIPMENT FORFIRE FIGHTERS:Not Applicable.Dry chemical, chemical foam, carbon dioxide.Keep people away. Isolate fire area and deny any unnecessaryentry.Wear positive pressure self contained breathing apparatus(SCBA) and full protective fire fighting clothing (includes firefighting helmet, coat, pants, boots, and gloves).F. ACCIDENTAL RELEASE MEASURESPROTECT PEOPLE:PROTECT THE ENVIRONM ENT:CLEANUP:Isolate area. Avoid contact with eye and skin. Wash exposedbody areas thoroughly after handling. Use appropriate safetyequipment.For small spills: losses incidental to correct applications of thisproduct in its intended uses are not expected to be harmful to theenvironment.For large spills: avoid contamination of drinking water, naturalwater, ground water, or any waterway. Losses incidental tocorrect applications of this product in its intended uses are notexpected to be harmful to the environment.Contain spill if possible. Use broom or by vacuum to collectmaterial for proper disposal. Rinse area with water. Prevent largespills from entering sewers or waterwaysG. HANDLING AND STORAGEHANDLING:RESPIRATORY PROTECTION:Selection of specific items such as gloves, boots, apron, or other,will depend on each operation. If hands are cut or scratched,use gloves impervious to this material for brief exposures. Usegloves with insulation for thermal protection, when needed.Atmospheric levels should be maintained below the exposureguideline. When respiratory protection is required for certainoperations, use an approved air-purifying respirator.EXPOSURE GUIDELINES: Sodium Chloride 10 mg/m 3,Calcium Chloride 10 mg/m 3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!