IBM Flex System x240 w

0. General Items0.1. Application Code DisclosureThe application program (as defined in Clause 2.1.7) must be disclosed. This includes, but is not limited to, the codeimplementing the five transactions and the terminal input and output functions.Appendix A contains the application code for the five TPC Benchmark C transactions.0.2. Benchmark SponsorA statement identifying the benchmark sponsor(s) and other participating companies must be provided.This benchmark was sponsored by International Business Machines Corporation.0.3. Parameter SettingsSettings must be provided for all customer-tunable parameters and options which have been changed from the defaultsfound in actual products, including but not limited to:• Data Base tuning options• Recovery/commit options• Consistency/locking options• Operating system and application configuration parameters.Appendix B contains the system, data base, and application parameters changed from their default values used in theseTPC Benchmark C tests.0.4. Configuration DiagramsDiagrams of both measured and priced configurations must be provided, accompanied by a description of thedifferences. This includes, but is not limited to:• Number and type of processors• Size of allocated memory, and any specific mapping/partitioning of memory unique to the test• Number and type of disk units (and controllers, if applicable)• Number of channels or bus connections to disk units, including the protocol type• Number of LAN (e.g. Ethernet) connections, including routers, work stations, terminals, etc, that were physicallyused in the test or are incorporated into the pricing structure (see Clause 8.1.8)• Type and run-time execution location of software components (e.g. DBMS, client processes, transactionmonitors, software drivers, etc)