Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6. TECHNICAL SPECIFICATIONS6.1. Technical specifications of <strong>AM</strong>-<strong>03</strong>Inputs:Outputs:Controls:Metering:AcousticSystem:6 stereo inputs, selectable from the front panel, electronicallybalanced with RF filter.Impedance: > 100 KOhm.Nominal level: 0 dBv.Connectors: Male connector, 3 pole - pitch 5.08mm.1 stereo parallel audio output to the selected input, with maleconnector, 3 pole - pitch 5.08mm600 Ohm, stereo headphones connector female ¼” connector withautomatic speaker disconnection.Input selector.Balance control.Gain control.Phase meter Left/Right by 25 led matrix in a 5 x 5 configuration.Three way acoustic system:Low:Mid:High:Limiter:Monoaural. 1 compression magnet-dynamic speaker.Stereo. 2 compression magnet-dynamic speaker.Stereo. 2 piezo-electric speakers.Incorporated to protect speakers, adjusted to the optimaloutput power.Cross-over frequencies:Low - Mid: 600 Hz.Mid - High: 4 KHz.Frequency response:65 Hz to 19 KHz.Harmonic distortion : < 0.1 %.PowerRequirements : 90 ~ 250 V AC, 50 - 60 Hz, 50 VA.Dimensions: Width: 483 mm (19").Height: 44 mm (1 Unit rack).Depth: 365 mm (14.4").Peso:6.2 Kilograms.Note: The technical specifications contained in this page are merely orientative. They are subject to change without previousadvice.<strong>AEQ</strong> <strong>AM</strong>‐<strong>03</strong>Self‐powered Stereo Audio Monitor
Change language