front - ARB 4x4 ACCESSORIES: САХАЛИН

FORDFORD EXPLORER 1996 - 2001 REAR LEAF SPRING MODELSFRONTV6 PETROL ENGINETORSION BARS -NITROCHARGERN16REAREstimated Lift: 40 mmSPRING: MEDIUM LOADNITROCHARGERREMARKS:12PART NUMBERPART NUMBERCS042RN17QTY2QTY22QTYUNITPRICE $UNITPRICE $Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.Important: A minimum of 60mm of droop must be maintained.OE spring bushes are required to fit CS042R springs. D10XL extra leaf should be fitted when a constant 200kgplus load is carried.FORD F250 & F350 2005 - 2008 ALL MODELSFRONTV8 DIESEL: COIL SPRINGEstimated Lift: 45mmSPRING: TO 100 KGSNITROCHARGERCASTER CORRECTION KITREAREstimated Lift: 60+mmSPRING: MEDIUM LOADTHIRD STAGESPRING:CONSTANT 600+KGSXL LEAFCENTRE BOLTNITROCHARGERU BOLTS - NO OVERLOAD LEAFU BOLTS - WITH OVERLOAD LEAFFITTING KITSPACER KITPART NUMBEROME768N195FK36PART NUMBERCS048RTSXL01CS048RD27XLUCB10N179OMEU68OMEU67FK31FK35OMESK112221QTY222222441UNITPRICE $ALL MODELS LEAF SPRINGUNITPRICE $REMARKS:1 Springs are supplied with bushes fitted.Where the OE spring has an overload leaf fitted, it must be replaced with a TSXL01 and the CS048R originalcentre bolt replaced by a UCB10, the original spacing block must also be re-fitted using U Bolts OMEU67.411121331234To maintain 60mm lift for loads over constant 600 KGS and add D27XL Extra Leaf.Fitment of Driveline Spacer Kit FK31 for Crew Cab or FK35 for Xtra Cab is recommended to reduce possibledriveline vibration. If required, additional spacing down of the centre bearing can be achieved by using anOMESK1 Spacer kit.Fitment of a FK36 Caster Correction Kit will provide approximately 3.5 to 4.0 degrees of extra caster. It isadvisable to have a Front End Alignment carried out to determine if a FK36 kit is requiredPage 23OME NO.25 INT Apr2010