PDF Catalogue - CBS Parts Ltd.

SPECIALTY &TRUCK HOSELOW & MEDIUMPRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGSADAPTERS &TUBE FITTINGSACCESSORIES &ASSEMBLY INSTRUCTIONSHOSE ASSEMBLYEQUIPMENT APPENDICIES2808PTFErMaximum Minimum MinimumOperating Burst Bend Vacuum WeightPart Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hosemm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft2808-08 10,7 0.42 14,7 0.58 190,0 2750 758,0 11000 117,3 4.62 94,8‡ 28‡ 0,30 0.202808-10 12,9 0.51 17,3 0.68 172,0 2500 689,0 10000 139,7 5.50 94,8‡ 28‡ 0,39 0.262808-12 16,5 0.65 20,6 0.81 121,0 1750 483,0 7000 165,1 6.50 67,7‡ 20‡ 0,45 0.302808-16 22,3 0.88 27,7 1.09 103,0 1500 414,0 6000 187,4 7.38 50,8‡ 15‡ 0,65 0.442808-20 28,4 1.12 34,3 1.35 78,0 1125 310,0 4500 279,4 11.00 50,8‡ 15‡ 0,85 0.572808-24 35,0 1.38 41,1 1.62 55,0 800 221,0 3200 355,6 14.00 50,8‡ 15‡ 1,04 0.70ConstructionExtruded PTFE tube with doublestainless steel braids.Operating Temperature Range–73°C to +260°C [–100°F to +500°F]FC469PTFEConductiveApplicationHot air, steam and most chemicalapplications. Not recommendedfor steam-cold watercycling. For more information onspecific fluid applications andhigh temperatre ratings, seepages 400-404.† Steam 200 psi at +388°F max.Engineering information is availablefor specific critical temperaturerequirements.Contact Eaton.‡Maximum negative pressure for-08 and larger are suitable forhose which has suffered no externaldamage or kinking. If greaternegative pressures are requiredfor -08 and larger hoses, the useof an internal support coil is recommended.Use of an internalsupport coil in -08 and larger PTFEhose is recommended for tubesupport where extended or continuousservice at high temperaturetogether with low or negativepressure is expected.For Complete Agency ListingsSee pages 397-398.rMaximum Minimum MinimumOperating Burst Bend Vacuum WeightPart Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hosemm in. mm in. bar psi bar psi mm in. kPa in/Hg Kg/m lbs/ftFC469-06 7,6 0.30 12,2 0.48 280,0 4000 1120,0 16000 63,5 2.50 94,8‡ 28‡ 0,25 0.17FC469-08 9,9 0.39 15,5 0.61 280,0 4000 1120,0 16000 73,2 2.88 94,8‡ 28‡ 0,36 0.24FC469-10 12,4 0.49 18,3 0.72 245,0 3500 980,0 14000 82,6 3.25 94,8‡ 28‡ 0,43 0.29ConstructionConductive extruded PTFE tubewith stainless steel single wirebraid.Operating Temperature Range–54°C to +204°C [–65°F to +400°F]ApplicationHigh pressure chemical and fluidtransfer. For information on specificfluid applications and hightemperature ratings, see pages400-404.† Steam 200 psi at +388°F max.Engineering information is availablefor specific critical temperaturerequirements.Contact Eaton.‡Use of an internal support coil in-06 and larger PTFE hose is recommendedfor tube supportwhere extended or continuousservice at high temperaturetogether with low or negativepressure is expected.For Complete Agency ListingsSee pages 397-398.Fitting Reference PageReusableFitting 189Socket Data 65Contact Eaton for fitting information.30 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011