Technical Data Agfa Professional Films - AgfaPhoto

Film identificationProcess colour coding on 35 mm filmsMargin bars on the cartridge• red Process AP 70/C-41• blue Process AP 44/E-6• grey B/W negative processingProcess colour coding on roll filmsOverprint at end of backing paper• yellow Process AP 70/C-41• blue Process AP 44/E-6• black B/W negative processingExposed margin marks1. Film type + emulsion number2. Frame numbering•On 35 mm films after 2 blank exposurescontinuous frame numbering startingwith "1" and "1A" up to 12A, 24A or36A•On roll films continuous double-sidedframe numbering from 1-12 or 41-61(120 roll film), or 1-25 or 41-83 (220roll film).Reciprocity effect3. Symbol marks on colour negative filmsSymbols are exposed on to 35 mm androll films to identify the film generation.Oprima 100 4 red squaresOprima 200 4 red trianglesOprima 400 2 red squaresPortrait 160 4 green squaresNotch coding on sheet filmsThe film type can be identified from thetype of notching. The emulsion side is facingthe viewer when the notching in uprightformat is at top right.Agfachrome RSX II 100Agfapan APX 100Agfa Scala 200xAgfacolor Portrait 160Spectral sensitivity→ lg SensitivitySpectral density→ Spectral densitySharpness→ Transfer factor (%)2.01.00-01.-2.01.001501005030Blue Green Red400 500 600 700→ Wavelength (nm)Medium densityMinimum density400 500 600 700→ Wavelength (nm)Colour negative filmsAgfacolor Optima 100 Agfacolor Optima 200Exposure reading (seconds) 1/10 000-1 10 100 1/10 000-1 10 100Exposure adjustment (f-stops) 0 + ½ + 1½ 0 + 1 + 2Agfacolor Optima 400 Agfacolor Portrait 160Exposure reading (seconds) 1/10 000-1 10 100 1/10 000-1 10 100Exposure adjustment (f-stops) 0 + 1 + 2 0 + 1 + 2Colour slide filmsAgfachrome RSX II 50 Agfachrome RSX II 100Exposure reading (seconds) 1/10 000-1 10 100 1/10 000-1 10 100Exposure adjustment (f-stops) 0 + ½ + 1 0 + ½ + 1Filtration (CC filter) 0 05B 10B 0 05B 10BAgfachrome RSX II 200Exposure reading (seconds) 1/10 000-1 10 100Exposure adjustment (f-stops) 0 + 1 + 2Filtration (CC filter) 0 075Y 15Y 05CB/W negative filmsAgfapan APX 100 Agfapan APX 400Exposure reading (seconds) 1/10 000-½ 1 10 100 1/10 000-1 1 10 100Exposure adjustment (f-stops) 0 + 1 + 2 + 3 0 + 1 + 2 + 3Developing adjustment (%) 0 – 10 – 25 – 35 0 – 10 – 25 – 35B/W slide filmAgfa Scala 200xExposure reading (seconds) 1/10 000-½ 1 10 100Exposure adjustment (f-stops) 0 + ½ + 1 + 220102 3 5 10 20 30 50 100→ Lines per mmColour density curves→ Density4.03.02.01.00BlueGreenRed–3.0 –2.0 –1.0 0 +1.0→ lg exposure (Lx · s)Speed: ISO 160/23°Granularity (x 1000): RMS 3.5Resolving powerContrast 1000 : 1 150 lines/mmContrast 1.6 : 160 lines/mmLayer thickness: 18 µmFilm base: 135 = 120 µm120/220 = 95 µmDX codingCartridge code: 135-24 = 00786 3135-36 = 00786 4Negative code: 49 – 026 F-PF-E3