MATERIAL SAFETY DATA SHEET FOR CAST®-Allergens - ALPCO ...

Bühlmann Laboratories AGBaselstrasse 55CH – 4124 Schönenbuch/Basel(Switzerland)Tel.: +41 (61) 487 12 12Fax: +41 (61) 487 12 34Postadresse/Mailing address:Bühlmann Laboratories AGPostfachCH – 4123 Allschwil 1www.buhlmannlabs.chinfo@buhlmannlabs.chMATERIAL SAFETY DATA SHEETFOR CAST ® -Allergens1. Identification of the Product and of the CompanyProduct: Allergens for CAST ® -Assays Catalog No.: see Allergen ListPurpose:In vitro diagnostic reagents for testing the cellular antigen stimulationCompany:BÜHLMANN Laboratories AGBaselstrasse 55CH-4124 Schönenbuch, SwitzerlandEmail: info@buhlmannlabs.chEmergency phone No: +41 (0)61 487 1212 Fax No: +41 (0)61 487 12342. Composition and Hazardous IngredientsComposition:single Allergen/mixture (lyophilised or ready to use)Hazardous IngredientConcentrationAllergen(s) ≤ 0.5 %3. Hazard IdentificationMight cause allergic reactions or sensitisation.4. Emergency and First Aid MeasuresIt is not expected to give rise to an acute hazard under normal conditions of use.Eye contact:Ingestion:Skin:Flush eyes with large amounts of water for at least 15 minutes.Flush mouth with large amounts of water, make sure not to swallow rinse.Wash well with soap and large amounts of water.If warranted, seek medical attention. If possible, save sample of material that caused reaction for use in determination ofappropriate treatment.5. Fire and Explosion Hazard DataThe components are non-flammable.6. Accidental Release MeasuresAbsorb spills of reagent and patient samples with absorbent paper, taking care not to spread the material. Clean spill area with apotent disinfectant. Discard all materials used to absorb spill and disinfect area into biohazard waste collection for proper disposal.7. Handling and storageStorageStore all reagents as dedicated in the relevant instruction for use.HandlingAdherence to the basic rules of laboratory safety should provide adequate protection:o Do not eat, drink, smoke or apply cosmetics in the laboratory.o Do not pipet solutions by mouth.o Avoid splashing or forming an aerosol.o Avoid direct contact by using protective articles such as lab coats and disposable gloves.8. Exposure control/personal protectionWear appropriate personal protective equipment when working with reagents or patient samples, including lab coats, disposablegloves and eye protection. Avoid hand/mouth contact. Wash hands as immediately after handling reagents or patient specimens.Page 1 of 2

MSDS: CAST ® -AllergensBÜHLMANN LABORATORIES AG9. Physical and Chemical PropertiesAppearance Odor Boiling Point pH Rel. Density Solubility in Waterliquid Allergens clear, colourless solutions n/a ~100 °C 7.3 – 7.5 ~1 g/ml completelyophilised Allergens white lyophilisates n/a n/a 7.3 – 7.5 ~1 g/ml complete10. Stability and ReactivityThe reagents in the kit are stable under the storage conditions described in the instructions for use. Hazardous decomposition willnot occur.11. Toxicological InformationThe specific Allergens may cause allergic reactions or sensitisation.12. Ecological Informationnot applicable13. DisposalAll potential hazardous materials must be disposed of in accordance with the prevailing regulations and guidelines of the agenciesholding juristication over the laboratory. Excess calibrators, patient samples or empty containers should be disposed according toinstitutional policy for biohazardous material.14. Transportation Informationnot applicable15. Regulatory InformationCAS No. R-Phrases S-Phrases EC-Numberspecific Allergens -- 42/43 -- --16. Other informationsOnly trained personal should handle this product. All actions should be done in accordance with legal regulations and commonpractised hygiene measures in the labs. Read the instruction for use carefully.The information provided in this Material Safety Data Sheet (MSDS) is believed to be accurate and represents the bestinformation currently available to us. However, we make no warranty or merchantability or any other warranty, expressed orimplied, with respect to such information, and we assume no liability for its use. Users should make their own investigations todetermine the suitability of the information for their particular purposes.July 27, 2005/AMThis MSDS replaces all former versions.MSDS No.: BAG/02Page 2 of 2