NS2 NeoSphere - Kim Lighting

More documents

Recommendations

Info

NS2NeoSphere revision 4/2/13 • kl_ns2_spec.pdfType:Job:Page: 2 of 4Standard MountingsSpecificationsFlush Mount (FM): Flush post top mount by means of anexpansion device activated by a single bolt within the splicecompartment. Pole must have a square-cut plain top. Standardpole size is 4" O.D. (3C" O.D. pole adapter available uponrequest). See diagram on page 1.Pole Tenon Mount (PT): Pole tenon mounting by means of a castaluminum adapter containing four recessed C" stainless steel allenhead set point screws. Pole must have a 2" pipe-size tenon (2C"O.D. X 4K" min. length). Pole tenon must be field drilled at one setscrew location to insure against fixture rotation. See diagram onpage 1.Twin Arm Mount (2SB): Two extruded aluminum oval arms aresupplied with internal concealed draw bolts for attachment to Kim4" O.D. poles with predrilled mounting holes (see Pole Ordering &Specifications). Arms are 180° apart, supplied with an internal polereinforcing plate with wire strain relief and an extruded aluminumriser for mounting FM (Flush Mount) fixtures only. A cast aluminumpole cap and matching riser cap are included, and all componentsare mechanically fastened to eliminate welds and visible fasteners.Wall Mounting (1W): A cast aluminum mounting bracket isfurnished for attachment to wall. (Attachment means and strengthof wall by others). An optional Wall Embedment Bracket (WEB) isavailable for casting into poured-in-place concrete walls. Bracket isgalvanized steel with receptacles for two C" bolts provided.Extruded aluminum oval arm is factory assembled to an extrudedaluminum fixture support riser and a cast aluminum wall coverplate. Fixture riser has a cast aluminum bottom cap, and wall coverplate has a removable cast aluminum cover for field splice access.Complete arm assembly can be mounted before field splices aremade. All arm, cap and cover plate components are curvilinearforms to match the fixture design, and all components aremechanically attached with no visible welds or fasteners. All wallcomponents are finished to match the fixture.
NS2NeoSphere revision 4/2/13 • kl_ns2_spec.pdfType:Job:Page: 3 of 4Standard FeaturesMountingCat. No.: FM PT 2SB 1WFlush Mount Tenon Mount Twin Mount Wall MountFixtureCat. No. designates fixture,lens type, lamp orientationand light distribution.H = Horizontal LampLight Distribution: Type II Type III Type IV Type VForward Throw SquareCat. No.: NS2H2 NS2H3 NS2H4 NS2H5Electrical ModuleHPS = High PressureSodiumPMH = Pulse StartMetal HalideCat. Nos. for Electrical Modules available:Lamp Lamp LineWatts Type Volts150 HPS 277 70HPS120 100HPS120 150HPS120 70PMH120 100PMH120 150PMH120 70HPS208 100HPS208 150HPS208 70PMH208 100PMH208 150PMH208 70HPS240 100HPS240 150HPS240 70PMH240 100PMH240 150PMH240 70HPS277 100HPS277 150HPS277 70PMH277 100PMH277 150PMH277 70HPS347 100HPS347 150HPS347 70PMH347 100PMH347 150PMH347Lamp ED-17, Coated ED-17, Coated ED-17, Coated ED-17, Coated ED-17, Coated ED-17, CoatedSocket Medium Base Medium Base Medium Base Medium Base Medium Base Medium BaseANSI Code S62 S54 S55 M98 M90 M102Ballast Type HX-HPF HX-HPF HX-HPF HX-HPF HX-HPF HX-HPFR-HPF (120V) R-HPF (120V) R-HPF (120V)FinishSuper TGIC powder coatpaint over a chromateconversion coating.Color: Black Dark Bronze Light Gray Platinum Silver White *Custom ColorCat. No.: BL-P DB-P LG-P PS-P WH-P CC-P* Custom colors subject to additional charges, minimum quantities and extended lead times.Consult representative. Custom color description:
Page 4: NS2NeoSphere revision 4/2/13 • kl

NS2 NeoSphere - Kim Lighting

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?