TERRA SPIKE ® XF / XD - Wiedenmann GmbH

ToolsHydraulic rotary brush Swathboard Multi-tine holderEvery time you pass overthe grass, it causes compactionand has a negativeimpact on the growth.Reduce the number ofpasses by combining theTERRA SPIKE ® XF / XD withtrailers that can be purchasedas an option.Use the optional “nail board“to increase the number ofholes per square metre andto intensify the degree ofmaintenance.If the optional hydraulic rotarybrush is used instead of the rearroller, the turf is first top-dressedand then deep loosened whilethe top-dress material is brushedinto the turf. This reduces thenumber of passes.When using hollow tines thecores can be deposited in rowsby means of the optional swathboard.This makes the subsequentcollection of the coresmuch easier.Solid tines 5 x 65, 5 x 135,8 x 65 or 8 x 150 mm aremounted in the multi-tine holder”nail board“. 24, 16 or 8 tinescan be mounted, dependingon the task and the requiredhole pattern. The ”sandwichconstruction“ of the nail boardallows quick and easy tinereplacement.TERRA SPIKE ® XF / XD thereisn‘t any more productiveway to care for your turf.TECHNICAL DATA TERRA SPIKE ® XF TERRA SPIKE ® XDModel: XF 6 XF 8 XD 6 XD 8Working width in cm: 160 210 160 210Weight in kg (approx.): 1070 1275 1125 1345Maximum working depth in mm: 220 220 275 275Dimensions L / W / H in cm (approx.): 135 / 215 / 120 135 / 264 / 120 139 / 215 / 120 139 / 264 / 120Mounting: rear three point cat. I and II rear three point cat. I and IIQuickSet / QuickFit / PowerPack / VibraStop: standard standardMinimum required tractor power (recommended): 24 kW/32 HP 32 kW/42 HP 24 kW/32 HP 32 kW/42 HPCrankshaft speed: 345 RPM 410 RPM 485 RPM 345 RPM 410 RPM 345 RPM 410 RPMMaximum admissible tractor power: 45 kW/60 HP 52 kW/70 HP 60 kW/80 HP 56 kW/75 HP 63 kW/85 HP 63 kW/85 HP 71 kW/95 HPMinimum tractor lifting capacity with standard attachment in N: 13900 16900 13900 16900Tractor PTO speed: 540 RPM 540 RPMSolid tines Ø in mm: 5, 8, 12, 20 5, 8, 12, 20Hollow tines Ø in mm: 12, 16, 20, 25 12, 16, 20, 25Rear roller: standard standardTurf retainer: optional optionalHydraulic depth adjustment: optional optionalSwath board: optional optionalHydraulic rotary brush: optional -Multi-tine holder for 5 mm and 8 mm solid tines: optional optionalArea coverage in continuous operation in m² per hour at a crankshaft speed of:345 RPM; at 1.3 km/h; square hole spacing 65 mm; (approx.):345 RPM; at 2.7 km/h; square hole spacing 130 mm; (approx.):345 RPM; at 4.0 km/h; square hole spacing 195 mm; (approx.):2100 m 2 /h4200 m 2 /h6300 m 2 /h2800 m 2 /h5600 m 2 /h8400 m 2 /h2100 m 2 /h4200 m 2 /h6300 m 2 /h2800 m 2 /h5600 m 2 /h8400 m 2 /h410 RPM; at 1.6 km/h; square hole spacing 65 mm; (approx.):410 RPM; at 3.2 km/h; square hole spacing 130 mm; (approx.):410 RPM; at 4.8 km/h; square hole spacing 195 mm; (approx.):2500 m 2 /h5000 m 2 /h7500 m 2 /h3400 m 2 /h6700 m 2 /h10000 m 2 /h2500 m 2 /h5000 m 2 /h7500 m 2 /h3400 m 2 /h6700 m 2 /h10000 m 2 /h485 RPM; at 1.9 km/h; square hole spacing 65 mm; (approx.):485 RPM; at 3.8 km/h; square hole spacing 130 mm; (approx.):485 RPM; at 5.7 km/h; square hole spacing 195 mm; (approx.):3000 m 2 /h5900 m 2 /h8900 m 2 /h4000 m 2 /h7900 m 2 /h11800 m 2 /h------Descriptions and illustrations are non-binding. We reserve the right to modify the construction and design.For more information please contact:11/08Wiedenmann GmbHAm Bahnhof89192 RammingenGermanyTel. + 49 (0)73 45/953-0Fax + 49 (0)73 45 / 9 53-2 33E-mail: info@wiedenmann.dewww.wiedenmann.de