PARTS SALES KIT UNDERCARRIAGE - Monarch Industrial Parts

D6N, D6M, D5H IDLERSCURRENT DESIGN - SYMMETRIC SEALS (STD, XL, LGP)INCREASED TREAD WEAR LIFEElevated Sprocket TractorsD6N, D6M, D5H(PER MACHINE)QUANTITYPARTNUMBERGroup 4 190-1546Components of GroupIdler Assembly 1 190-1547Bearing 1 2 9P-1360Shaft 1 161-7350Collar 2 160-9756Retainer 2 161-7550Thrust Washer 2 1 110-3362Bolt 12 053-2294Washer 12 5M-2894Seal -- Duo-Cone Group (Symmetric) 2 161-7247Toric Ring 1 2 161-7249Seal -- Collar 2 5K-0216Seal -- Retainer 2 1H-8128Stopper 1 3T-9536Plug 1 6Y-0473Mounting Hardware (D6N, D6M) (End Cap and Block with Bolt Hole Centerline 88 mm)End Cap (Front & Rear LH) 1 233-0372End Cap (Front & Rear RH) 1 233-0368Block (Front LH) 1 254-3928Block (Front RH) 1 254-3927Block (Rear LH) 1 239-8091Block (Front RH) 1 239-8090Bolt (Front) (16 mm) 4 8T-0359Bolt (Rear) (16 mm) 4 8T-0282Washer 4 5P-8247Shim (Front Idlers Only) 4 254-3929Mounting Hardware (D6N, D6M) (End Cap and Block with Bolt Hole Centerline 75 mm) 3End Cap 2 108-1138Block 2 108-1136Bolt (16 mm) 4 8T-0282Washer 4 5P-8247Shim (Front Idlers Only) 4 3W-2301Mounting Hardware (D5H) (End Cap and Block with Bolt Hole Centerline 75 mm) 3End Cap 2 9N-4683Block 2 9N-4680Bolt (5/8") 4 1A-8651Washer 4 5P-8247Shim (Front Idlers Only) 4 3W-23011 Component of preceding assembly or group; quantity shown is quantity per assembly or group.2 Use (1) 9G-9351 Thrust Washer and (4) 1L-5072 Dowels to repair former 6T-3283 Retainer Assembly. Use (1) 9W-2423 Thrust Washerand (4) 2H-1190 Dowels to repair former 9G-9350 Retainer Assembly. DO NOT DRILL AND DOWEL NEW 110-3362 and 106-7691 ThrustWasher. See Special Instruction SEHS8515.3 These components are not included in the idler group; quantities shown are required to mount each idler.47