EcoTop ETF-ETFL-ETFW Manuale Utente Rev.09-06 GB - Sarigas

Rev.1Warning: The wrong connection of the circuit “R1” with the circuit “PCB” electrically connected, can causepermanent damages on both circuits. Before connecting the electrical connection it is advisableto verify visually the right position of both connectors (Fig.26).WARNING: Before insert and to disconnect the card "R1" power supply must be disconnected!!!CONNECTION TO THE “ ” WITH REMOTECONTROLCONNECTION TO THE “ ” WITH REMOTECONTROL AND AMBIENT THERMOSTAT (linked tothe connector C-D of the “ ”WARNING: Fig.26 WARNING: Fig.27In this type of connection, the connectors C-D must be linkedto the “ ” and the connector C1-D1 of the regulationcircuit R2.In this type of connection, the connector C1-D1 of theregulation circuit R2 must be linked.CONNECTION TO THE “ ” WITH REMOTECONTROL AND AMBIENT THERMOSTAT (linked to theconnector C1-D1 of the regulation circuit ”R2”)CONNECTION TO THE “ ” WITH DAILY TIMECLOCK Cod.00301WARNING: Fig.28 WARNING: Fig.29In this type of connection, the connector C-D of the “ ”must be linked.In this king of connection the cables of the time clock(M1-M2) must be linked to the power supply of the circuit“ ” (L-N), as indicated in the drawing.SARIgas ETF / ETFL / ETFW Page 21