PRECISION TOOLS CATALOGUE - Trade Tools

inside micrometers & BORE Gauges823 SERIES - TUBULAR INSIDEMICROMETERS3089 series - bore gauge sets3089M-181-160J823MAZStarrett 823 Series Micrometers are highlyuseful tools for internal linear measurementssuch as measuring cylinders, rings, settingcalipers, comparing gauges and measuringparallel surfaces.The extension rods are made of steel tubing,light in weight, yet extremely rigid. Rods areapproximately 9.5mm (3/8”) diameter to meetthe requirements of mechanics who prefer thislarger diameter. By removing the hardenedand ground anvil ends (end caps) of themicrometer head, the rods may be attachedto either or both ends of the micrometer aspreferred.Measuring inside diameterusing convenient handleattached to the micrometer.• 140mm long, covenient handle includedon A and B micrometers may be clampedwhere it will provide correct balance andreach.• Interchangeable anvils on 13mm and25mm heads.• Each rod is marked with length.• Tubular measuring rods are lightweight, yetextremely rigid.• Both the adjustable anvils on rods and thehead anvil are hardened and ground.• Lock nut included with 25mm heads.Cat No Range Graduation Movement Of Screw Description Item No823MAZ 40 - 200mmWith 6 Rods & Handle DN67213mm823MBZ 40 - 300mm 0.01mmWith 8 Rods & Handle DN677823MEZ 100 - 1000mm 25mm With 10 Rods DN682823AZ 1.1/2 - 8”With 5 Rods & Handle DN6421/2”823BZ 1.1/2 - 12” 0.001”With 8 Rods & Handle DN647823CZ 4 - 24” 1” With 7 Rods DN652780 SERIES - 3 POINT ELECTRONIC digitalINTERNAL MICROMETERS with outputMETRIC BORE GAUGE SETStarrett 780 Series provide IP65 level ofprotection against coolant, water and dirt inhostile shop environments. In addition, theyoffer extended travel, reducing the need toexchange anvils.The ground contact points seat the internalmicrometer faster and more accuratelythan the spherical contacts found in othergauges.These rugged and accurate internalmicrometers are available individually or insets from 6mm (1/4”) to 200mm (8”).Cat No Range Graduation No Of Heads No Of Rings Item NoS780XTCZ 6 - 10mm / 1/4 - 3/8”S780XTDZ 10 - 20mm / 3/8 - 3/4”0.003mm / 0.0001”• Wide measurement range withoutchanging anvils.• Resolution to 0.001mm (0.00005”).• Carbide measuring faces on sizes above12.5mm (1/2”) diameter.• Includes instant inch/mm conversion andpreset + and - functions.• IP65 level of protection against coolant,water, dirt and dust.• Includes an RS232 output port for datatransmitting.2 1 DM4460DM4461S780XTEZ 20 - 50mm / 3/4 - 2”3DM44620.004mm / 0.00015”2S780XTFZ 50 - 100mm / 2 - 4” DM4463S780XTGZ 100 - 200mm / 4 - 8” 0.006mm / 0.00025” 4 DM4464Suitable for a wide range of boremeasurements.Cat No Range Graduation Item No3089M-181-10J6 - 10mmDR93963089M-181-18J 10 - 18mm DR93993089M-181-35J 18 - 35mm DR94023089M-181-50J 35 - 50mm 0.01mmDR94053089M-181-160J 50 - 160mm DR94083089M-181-250J 160 - 250mm DR94113089M-181-450J 250 - 450mm DR94143089Z-131-715J 0.7 - 1.5”DR94163089Z-131-1424J 1.4 - 2.4” 0.0005”DR94173089Z-131-26J 2 - 6” DR9418S3089MZ-181-160J Metric Bore Gauge Set, Set Contains, 3089M-181-35J, 50J & 160J DR9415S3089z-131-6j• Carbide Tipped Anvil.• Ergonomic design with non-slip insulatinggrip.• All anvils laser marked for easy selection.• 0.01mm graduated dial.Imperial Bore Gauge Set, Set Contains, 3089Z-131-715J, 1424J& 26JDR9418514