Micrometer

Universal MicrometerSERIES 116 — Interchangeable Anvil Type• Non-rotating spindle type which acceptsseven forms of optional interchangeable anvil/ spindle tip (flat, spline, spherical, point,knife-edge, disk, and blade) for a wide rangeof applications.• Equipped with Ratchet Stop for constantmeasuring force.• Optional anvils / spindle tips for screw threadmeasurement (matching V and cone) are alsoavailable.BTechnical dataSpindle feed error: 3μm/.00015"Optional accessories• Interchangeable anvils / spindle tips are available in matching pairs.3.5Flat 116-801Spherical 116-80345Knife-edge 116-805Blade 116-8070.1ø3.50.75 ø6 ø62SR4Spline 116-802Point 116-804Disk 116-80655°Order No.Description116-800 Anvils / spindle tips set (7 pairs)0.4ø0.3 ø2ø6ø4ø11.1Optional accessories• Thread-measuring interchangeable contact points areavailable in matching pairs.Order No.Set IdentifierRange of measurement (mm)116-831 0.4 - 0.5mm/64 - 48TPI116-832 0.6 - 0.9mm/44 - 28TPI116-833 1 - 1.75mm/24 - 14TPI116-834 2 - 3mm/13 - 9TPI116-835 3.5 - 5mm/8 - 5TPI116-836 5.5 - 7mm/4.5 - 3.5TPI116-830 116-831 - 116-836 M (U) SetSPECIFICATIONSMetricOrder No. Range Graduation Accuracy116-101 0 - 25mm116-102 25 - 50mm0.01mm±4µm* 116-102 is provided with a plain setting standard (167-101)and a 60°-thread setting standard (167-261) for adjustingthe minimum range point according to the application.116-101Interchangeable contact points (optional)InchOrder No. Range Graduation Accuracy116-105 0 - 1".001" ±.0002"116-106 1" - 2"No.116-800No.116-831116-832116-833116-834116-835116-836116-830116-801807 54,000mm0.40.564480.60.9442811.752414231393.5585M1U1M2U2M3U3M4U4M5U5M6U6 5.574.53.5116-831116-836MU8,7608,7608,7608,7608,7608,76052,500Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specification without notice.B-28