19 series rim single door adaptor plate installation instructions parts ...

More documents

Recommendations

Info

2ADAPTOR INSTALLATION1) PREPARE DOOR PER ATTACHED DRILLING TEMPLATE2) IF USING CYLINDER APPLICATION, MOUNT CYLINDER WITH KEYWAY HORIZONTAL, AS SHOWN BELOW.KEYWAY (HORIZONTAL)CYLINDERADAPTOR PLATECYLINDER MOUNTING PLATEPAGE 2
3) IF USING KIL APPLICATION, REKEY OR CHANGE TO NIGHT LATCH, IF APPROPRIATE, SEE BELOW.LEVERCATCHCHANGE TO NIGHT LATCH FUNCTION:1. WITH TRIM UNLOCKED, INSERT KEY INTO CYLINDERAND TURN THE KEY 45 DEGREES CLOCKWISE. DEPRESSTHE LEVER CATCH AND PULL OFF THE LEVER.2. USING A SCREWDRIVER, TURN THE CROSS-HAIR CLOCKWISE180 DEGREES.3. SLIP THE LEVER ONTO THE SPINDLE ALGINING THE LEVERCATCH WITH THE HOLE.4. WITH THE KEY TURNED 45 DEGREES CLOCKWISE, DEPRESSTHE LEVER ONTO THE LEVER CATCH UNTIL THELEVER CATCH ENGAGES INTO THE LEVER.5. CHECK THAT WHEN THE KEY IS REMOVED THE TRIM ISLOCKED. NOTE: THE KEY WILL NOT ROTATE 360 DEGREES.CROSS-HAIRREKEYING KIL TRIM:1. WITH TRIM UNLOCKED, INSERT KEY INTOCYLINDER AND TURN THE KEY 45 DEGREESCLOCKWISE. DEPRESS THE LEVER CATCHAND PULL OFF THE LEVER.2. REMOVE THE CYLINDER FROM THE LEVER ANDRE-KEY OR REPLACE WITH OTHER CYLINDER.NOTE: IF REPLACING EXISTING CYLINDER WITHANOTHER CYLINDER, THE CYLINDER TAILPIECELENGTH, WIDTH, AND ORIENTATION ARE CRITICAL;IT MAY BE NECESSARY TO SWAP CYLINDER TAILPIECESBEFORE CHANGING CYLINDERS.3. REASSEMBLE THE CYLINDER WITH KEY INTO THE LEVERAND SLIP ONTO THE SPINDLE ALGINING THE LEVER CATCHWITH THE HOLE.4. WITH THE KEY TURNED 45 DEGREES CLOCKWISE, DEPRESSTHE LEVER ONTO THE LEVER CATCH UNTIL THE LEVERCATCH ENGAGES INTO THE LEVER.LEVERCATCH& HOLEPAGE 3
Page 1: 19 SERIES RIMSINGLE DOORADAPTOR PLA
Page 5: 2-1/8”3/4”2-3/4”1/2” DIA. T

19 series rim single door adaptor plate installation instructions parts ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?