SIDEFLEXING CHAINS FOR MODULAR BELTS ... - Regina

SIDEFLEXING CHAINSPRODUCTS RANGE: 1” pitch, light and heavy duty seriesSERIESGUIDE SYSTEMSURFACETHICKNESSmm inchesPLATE MATERIALWORKING MODULAR BELTS783T783T SR (Short Radius)782M783MTABTABMAGNETICMAGNETICSolid TopSolid TopFlush GridSolid Top8,7 0.3438,7 0.3438,7 0.3438,7 0.343LWLWLWLWDKDKDKDKUsed in combination with Matveyor®Light Duty Modular Belts (8,7 mm thickness):- 500 and 1500 series (flush grid versions)- 600 and 1600 series (solid top versions)RANGEEXTENSION793T793MTABMAGNETICSolid TopSolid Top12,7 0.50012,7 0.500UPUPDKDKUsed in combination with Matveyor®Heavy Duty Modular Belts (12,7 mm thickness):- USPM series (Metric Standard)- USP and UCC series (American Standard)MATERIALSType Description FeaturesLWLight BrownLow WearAcetal ResinDuPont Delrin® homopolymer special blended acetal resin, with good wear resistance.UPGreyDKDark GreyUltra PerformanceAcetal ResinDelrin® Kevlar®Acetal ResinDuPont Delrin® Ultra Performance special homopolymer acetal resin. Particularly suitable for applicationswhere low coefficient of friction and contained dusting are needed.DuPont Delrin® homopolymer acetal resin of superior grade, reinforced with Kevlar® in order to obtainextremely high wear resistance capabilities. Because of extremely low friction of this material,it offers the ability to run “dry” or with minimal lubrication.All Matveyor ® sideflexing chains with TAB guide system are equipped with austenitic stainless steel pins with excellent wear and chemical attacks resistance.All Matveyor ® sideflexing chains with Magnetic guide system are equipped with magnetic stainless steel pins with high wear resistance.APPLICATIONS- 782 / 783 series are used in sideflexing paths running side by side with Matveyor® Light Duty modular belts (500/1500 or 600/1600 series) particularly in bottlinglines (cans, PET bottles or new glass bottles) and packaging lines.- 793 series is used in sideflexing paths running side by side with Matveyor® Heavy Duty modular belts (USPM or USP/UCC series) particularly in bottling lines(new glass bottles) and glass manufacturing.reduced gapBENEFITS- 1’’ pitch for all Matveyor® sideflexing chains guarantees a greater support area in curve with reduced plates gap.- The reinforced thickness of these chains ensures, in combination with Delrin® acetal resins, a better wear life withhigh loads resistance capabilities.- Availability of a complete range of sideflexing 83,8 mm wide chains, for gap reduction on 85 mm pitch conveyors.- Matveyor® sideflexing chains with same thickness of respective modular belts for an easy installation side by sidethat guarantees a product support surface without discontinuities.- Matveyor® sideflexing chains with TAB guide system use the same curves as FliteTop® plastic chains 880T,879T and FliteTop® steel chains 881T and 981T.- Matveyor® magnetic sideflexing chains, in combination with Reginamagnetic curves, ensure a superior magnetic field evenness in order tohave a greater retention force on chains and a better fluency in curves.DuPont Delrin® and DuPont Kevlar® are registered trade marks of E.I. DuPont De Nemours and Associates2.