Information and Processing Manual Rheinspan® AirMaxx - Triplaco nv
Information and Processing Manual Rheinspan® AirMaxx - Triplaco nv
Information and Processing Manual Rheinspan® AirMaxx - Triplaco nv
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.3 Cutting<br />
<strong>Processing</strong> <strong>Manual</strong> <strong>Rheinspan®</strong> <strong>AirMaxx</strong><br />
<strong>Rheinspan®</strong> <strong>AirMaxx</strong> can be cut to size <strong>and</strong> milled on all st<strong>and</strong>ard wood working<br />
machines using the tools commonly used for chipboard. There is no additional fouling<br />
of cutting tools.<br />
Both hard metal <strong>and</strong> diamond-equipped tools can be used. No excessive adhesions<br />
are visible on the blade even after longer periods of operation.<br />
To avoid fractures in the coating layer, <strong>AirMaxx</strong> should always be sawn using a<br />
scoring saw, fractures in the core layer are avoided by using a protective saw where<br />
the saw blade exits.<br />
Likewise, the use of a protective cutter is also recommended. New, sharp tools<br />
should also be used to prevent fracturing of the edges.<br />
Special information concerning suitable cutting tools <strong>and</strong> tooth geometries is<br />
available on request from the company HOLZMA.<br />
Any sawdust <strong>and</strong> waste created are easily removed via existing extraction systems –<br />
in contrast to PVC, no separate extraction system is required.<br />
For further information on disposal <strong>and</strong> incineration, please refer to Section 4.2 Fire<br />
behaviour <strong>and</strong> 4.4 Ageing <strong>and</strong> disposal.<br />
Fig. 5: Sectional view of an <strong>AirMaxx</strong> board (above) <strong>and</strong> a normal chipboard (below) with thick edge<br />
Nolte Holzwerkstoff GmbH & Co. KG 9
Change language