Door and sliding systems

designer piece
This is also true when special requirements are concerned.
Burglar and bullet-resistance, fire protection doors,
smoke control doors and escape door systems:
The WICSTYLE range of doors offers your customers
prevention and security in all cases and is tailored to their
specific needs. You will see the advantages of the
WICONA Unisys principle in aspects such as the fact that
the basic construction is easy to upgrade through
to the desired level of safety: standardised accessories
enable you to meet all property-specific security
requirements in an economical and time-saving manner.
An overview of the WICSTYLE door ranges
General characteristics
■■ Standard door, upgradeable with additional locks
to the desired level of security and protection
(e.g. WK 1 – WK 3)
■■ Special front door system for private homes
■■ Special range of fire protection, smoke control
and escape doors
Surface treatment
■■ Anodization, powder coating in all RAL colours
and many other shades too
■■ Wood veneers
Introduction
Various security options such as multipoint locks, burglarresistance
from classes WK 1 to WK 3, fingerprint sensors,
door edge gap locks or the ability to integrate surveillance
cameras and alarm systems ensure that your customers’
safety and security requirements can be met.
WICSTYLE doors comply with the latest product standard
prEN 14351-1 and already fulfil the requirements of the
CE mark that is mandatory from 2010. Here at WICONA,
we place emphasis on tried-and-tested quality:
Test certificates, documents and proof of impartial testing
facilities such as from the Institute of Window Technology
(ift, Rosenheim), confirm that WICSTYLE products meet
all of the statutory standards and guidelines.
You and your customers are therefore in safe hands.
Profile technology
■■ Main profiles in multi-chamber system
■■ Profile thermal bond fits strongly and tightly,
with quality-assured production by the works
environment.
■■ Composite aluminium profiles from quality assured
and monitored production
■■ 50 and 65 mm profile depth uninsulated, 65, 77,
81 and 88 mm with thermal break
Profile connecting technology
■■ Cast aluminium corner cleat with adhesive
injection technology and mechanical secure
Gaskets
■■ Glazing with EPDM glazing gaskets, uninterrupted
on the inside and outside.
■■ EPDM stop gaskets in door leaf profiles,
uninterrupted on the inside and outside
Fittings
■■ RAL-tested
■■ Permitted door infill weights from 100 kg up
to 200 kg
■■ Designs with aluminium or stainless steel butt
hinges, adjustable horizontally and vertically
■■ Concealed hinges
T E C H N O L O G Y F O R I D E A S
7