frenomat und frenostat Electronic Brake Units

frenomat 2/frenostat 1000/frenostat 2000 electronic brake units
Technical data
Maximum braking current:
frenomat 2
frenostat 2000 Size 1
frenostat 2000 Size 2
frenostat 2000 Size 3
frenostat 2000 Size 4
30 A
36, 60 A
100, 150, 200 A
300, 400, 500 A
750, 1000, 1500 A
Input braking voltage:
+ 10%/ - 15% at 50 to 60 Hz
230 V to 500 V
higher than 500 V on request
Max. output braking voltage:
(V) DC
Line voltage
AC
Braking current
DC
230 V 80 V
400 V 160 V
500 V 190 V
660 V 270 V
Ambient temperature:
- 25°C to + 45°C at nominal output;
and + 60°C, reduction in at temperatures
between + 45°C braking current of 1.5%
necessary per °C
Contact load:
250 V / 5 A (at terminals 3 and 4)
Braking time:
0 to 12 seconds;
when a standstill monitoring the braking
time is set automatically unit is connected
to terminal n1/T3
ON time:
20% in relation to 1 min. (12 s/min.)
Please inquire about longer ON times
External fuses:
frenomat – max. 16 A
frenostat – approx. 150%
of rated motor current
9