MATERIALS
08 - Ma terials Handling - Bullivants
08 - Ma terials Handling - Bullivants
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OHS520211<br />
FS520785<br />
EMS520269<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Chain Blocks<br />
Lever Blocks<br />
Lifting Clamps<br />
Magnetic Lifters<br />
Electric Hoists<br />
Air Hoists<br />
Electric Winches<br />
Air Winches<br />
Hand Winches<br />
Lever Winches<br />
Spring Balancers<br />
Load Indicators<br />
Hydraulic Spare Parts<br />
Trolleys<br />
Pallet Trucks<br />
Fabricated Lifting Product -<br />
Forklift Applications<br />
Fabricated Lifting Product - Crane<br />
& Overhead Lifting Applications<br />
Spreader Beams<br />
Extendable Combination Lifting<br />
& Spreader Beams<br />
Pipe End Caps<br />
Pallet Lifting<br />
Work Cages<br />
Lifting Hooks<br />
Fabricated Lifting Product -<br />
Oxy/Acetylene Handling<br />
Fabricated Lifting Product -<br />
Goods Cages<br />
4th Edition<br />
HANDBOOK 4th Edition<br />
166 - 225
Bullivants’ Boss range of hoisting products are all<br />
manufactured to AS1418. The BOSS range comes with<br />
individual test certifi cates with each item.<br />
Care and use<br />
• Always examine the Chain Block carefully<br />
before use. Look for cracks or damage, particularly<br />
with hooks and load chain.<br />
• Keep load chain clean and oiled to prevent undue<br />
damage or wear.<br />
• When in use, avoid dragging the load chain<br />
through dirt or mud.<br />
• When the Chain Block is used outdoors or in<br />
a corrosive environment, ensure that it is regularly<br />
and adequately lubricated.<br />
• Do not operate the Chain Block if you do not<br />
have a clear view of the bottom block and the load.<br />
• Hooks should never be tip loaded.<br />
• Never reeve the load chain of a chain or lever<br />
block around the load.<br />
Prior to use ensure you check the following:<br />
• Deformation, damage, bend in the neck of the hook.<br />
• Check the suspension pin does not show signs of<br />
bending, cracking or wear.<br />
• Ensure that the side and suspension plates are free<br />
from cracks wear and damage.<br />
• Check the load chain is free from nicks, 10% wear,<br />
gouges, arc burn, twisted or bent links.<br />
• Check that the safety latches are fi tted and<br />
working correctly.<br />
• Check that the WLL tag is fi tted and the WLL is eligible.<br />
Please note; if the Lever Block or Chain Block does not<br />
comply to all the inspection criteria- it must be removed<br />
from service immediately - tag it ‘out of service’ and<br />
report it!<br />
Chain Blocks AS1418.2<br />
BOSS Chain Blocks AS 1418.2 are strong, lightweight, robust<br />
and are ideal for various commercial<br />
and industrial applications. The identifi cation plate has no<br />
aluminium content as such is suitable for<br />
underground mining.<br />
Lever Blocks AS1418.2<br />
BOSS Lever Blocks AS1418.2 are a sturdy, highly versatile tool<br />
for a multitude of lifting, pulling,<br />
tensioning and securing applications. The identification plate<br />
has no aluminium as such it means it<br />
is suitable for underground mining.<br />
Chain Blocks<br />
BOSS Chain Block: Unit of Measure - Each<br />
• Lightweight robust construction.<br />
• Stainless steel ID plates and rivets (suitable<br />
for underground mining applications).<br />
• Proof Tested in accordance with Australian Standards.<br />
• Fully machined lift wheel.<br />
• Test certificate supplied with each unit.<br />
• Minimum headroom.<br />
• Individually serial numbered for complete traceability.<br />
• Galvanized hand chain.<br />
• Fully enclosed gear train.<br />
• Lower hook complete with thrust race.<br />
• Super strength alloy load chain.<br />
ORDER CODE<br />
Capacity (tonnes)<br />
Lift (m)<br />
Effort req. (kg)<br />
Chain Dia. (mm)<br />
Headroom (mm)<br />
Width (mm)<br />
Depth (mm)<br />
Top/Bottom Hook<br />
Opening (mm)<br />
201136 0.5 3.0 23 6 270 127 131 30 10<br />
Weight (kg)<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
201150 0.5 6.0 23 6 270 127 131 30 12<br />
201137 1 3.0 30 6 317 158 140 28 12<br />
201142 1 6.0 30 6 317 158 140 28 14.5<br />
201143 2 3.0 35 8 414 187 161 33.5 22<br />
201144 2 6.0 35 8 414 187 161 33.5 26.5<br />
201145 3 3.0 27 8 465 210 161 40 32<br />
201158 3 6.0 27 8 465 210 161 40 41<br />
201159 5 3.0 41 10 636 253 161 50 46<br />
201161 5 6.0 41 10 636 253 161 50 52<br />
201202 5 10 41 10 636 253 161 50 93.5<br />
201204 10 3.0 39 10 750 373 184 64 68<br />
201206 10 6.0 39 10 750 373 184 64 80<br />
Other capacities and lift sizes available.<br />
WWW.BULLIVANTS.COM 167
PWB Kito M3 Chain Block: Unit of Measure - Each<br />
The PWB Anchor M3 Series Chain Blocks manufactured by KITO have<br />
been designed for maximum durability and safety for continuous heavy duty<br />
applications. Available in standard lift heights of 3 and 6 metre, these superior<br />
units can also be close coupled to PWB Anchor Push and Geared Trolleys for<br />
further reduced headroom.<br />
Optional lift heights also available.<br />
The 250kg capacity, CX003 Chain Block from KITO is equipped with an<br />
Overload Limiter as standard.<br />
Model CX<br />
Model M3<br />
ORDER CODE<br />
Capacity (tonnes)<br />
Standard Lift (m)<br />
Hand Effort to Lift<br />
Max Load N (kg)<br />
Headroom min.<br />
(mm)<br />
Chain Dia. (mm) &<br />
No of Falls<br />
Weight (kg)<br />
PWB Part No.<br />
203945 0.25 2.5 147 (15) 217 3.2 x 1 2.4 45377<br />
201174 0.5 3.0 235 (24) 285 5.0 x 1 10.0 43269<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
203942 0.5 6.0 235 (24) 285 5.0 x 1 14.5 47769<br />
201151 1.0 3.0 284 (29) 295 6.3 x 1 11.5 43271<br />
201186 1.0 6.0 284 (29) 295 6.3 x 1 16.9 47444<br />
203912 1.5 3.0 343 (35) 350 7.1 x 1 14.5 43273<br />
201195 2.0 3.0 353 (36) 375 8.0 x 1 20.0 43275<br />
203913 2.0 6.0 353 (36) 375 8.0 x 1 26.9 47882<br />
201156 3.0 3.0 363 (37) 510 7.1 x 2 24.0 43277<br />
203941 3.0 6.0 363 (37) 510 7.1 x 2 33.6 47883<br />
203914 5.0 3.0 333 (34) 600 9.0 x 2 41.0 43279<br />
203915 5.0 6.0 333 (34) 600 9.0 x 2 54.2 47884<br />
203943 7.5 3.0 343 (35) 770 9.0 x 3 63.0 43281<br />
203916 10.0 3.0 353 (36) 760 9.0 x 4 83.0 49575<br />
203944 10.0 6.0 353 (36) 760 9.0 x4 106.7 49577<br />
PWB Kito M3 With Overload Limiter: Unit of Measure - Each<br />
Complementing the existing KITO M3 Series Chain Block range is the<br />
‘Overload Limiter’ model, designed for improved safety and durability.<br />
The hoist overload limiter protects the hoist mechanism from damage<br />
due to overloading. When an overload is applied to the hoist, the<br />
overload limiter actuates to stop lifting.<br />
ORDER CODE<br />
Capacity<br />
Lift (m)<br />
Headroom (mm)<br />
Load Chain Dia.<br />
(m) x Fall<br />
Mass (kg)<br />
PWB Part No<br />
201527 500kg 3 360 5.0 x 1 10.0 63067<br />
201529 1 tonne 3 410 6.3 x 1 11.5 63068<br />
201531 2 tonne 3 500 8.0 x 1 21.0 63069<br />
201533 3 tonne 3 540 7.1 x 2 24.0 63070<br />
201535 5 tonne 3 640 9.0 x 2 41.0 63071<br />
201528 500kg 6 360 5.0 x 1 10.0 63109<br />
201530 1 tonne 6 410 6.3 x 1 11.5 63063<br />
201532 2 tonne 6 500 8.0 x 1 21.0 63064<br />
201534 3 tonne 6 540 7.1 x 2 24.0 63065<br />
201536 5 tonne 6 640 9.0 x 2 41.0 63066<br />
168<br />
1300 722 999
Pacific Hoists Vital Chain Blocks: Unit of Measure - Each<br />
Features<br />
• Manufactured in Japan using optimum high quality steel<br />
• Designed for long-term use while providing the lowest possible per-use cost<br />
• Can be supplied close coupled and extra close coupled to girder trolleys to<br />
alleviate headroom restrictions<br />
• Optional overload protection<br />
• Customised lift heights are available upon request<br />
• Quality caged needle bearings<br />
• Load chain exceeds Australian Standards with 5:1 Safety Factor<br />
Applications<br />
• Suitable for industrial, rural, shipbuilding, construction and mining industries<br />
Specifications<br />
• All Vital models are manufactured to comply with the strict JIS & ISO<br />
regulations and AS1418.2<br />
ORDER CODE<br />
Capacity (tonnes)<br />
Lift (m)<br />
Headroom (mm)<br />
Mass (kg)<br />
Overload<br />
Protection<br />
Pacific Hoists<br />
Part No.<br />
201176 0.5 3.0 305 8.6 No VCB053<br />
201153 1.0 3.0 345 11.5 No VCB103<br />
201154 1.5 3.0 370 13.8 No VCB153<br />
201196 2.0 3.0 425 21.6 No VCB203<br />
201157 3.0 3.0 505 23.0 No VCB303<br />
201538 5.0 3.0 635 41.0 No VCB500<br />
201178 0.5 6.0 305 11.6 No VCB050/6<br />
201189 1.0 6.0 345 15.5 No VCB100/6<br />
201194 1.5 6.0 370 18.8 No VCB150/6<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
201198 2.0 6.0 425 28.6 No VCB200/6<br />
201200 3.0 6.0 505 29.0 No VCB300/6<br />
201539 5.0 6.0 635 54.0 No VCB500/6<br />
201540 10.0 6.0 760 112.0 No VCB910/6<br />
201541 0.5 3.0 305 8.6 Yes VCB051<br />
201542 1.0 3.0 345 11.5 Yes VCB101<br />
201543 1.5 3.0 370 13.8 Yes VCB151<br />
201544 2.0 3.0 425 21.6 Yes VCB201<br />
201545 3.0 3.0 505 23.0 Yes VCB301<br />
201546 5.0 3.0 635 41.0 Yes VCB501<br />
201547 7.5 3.0 740 60.5 Yes VCB751<br />
201548 10.0 3.0 760 78.0 Yes VCB911<br />
201549 15.0 3.0 850 150.0 Yes VCB916<br />
201550 20.0 3.0 870 190.0 Yes VCB621<br />
Other heights of lift also available.<br />
WWW.BULLIVANTS.COM 169
08 - <strong>MATERIALS</strong> HANDLING<br />
Pacific Hoists Chain Blocks: Unit of Measure - Each<br />
Pacifi c Chain Blocks feature better quality in a new compact design. The<br />
extensive range is suited for many applications in the mining, construction,<br />
industrial and automotive industry. A patented Overload Limiting device is<br />
available for all sizes to improve safety. These chain blocks have it all; better<br />
quality, easy to use, improved safety and all of this with reduced cost.<br />
Features<br />
• All Pacific models are manufactured to comply with AS1418.2.<br />
• High strength end stop with secondary end anchor for increased safety.<br />
• “T” type hooks for improved load holding integrity (except for the<br />
250kg capacity).<br />
• Gear system design for reduced effort when lifting loads.<br />
• Includes a specially designed hand wheel to eliminate hand<br />
chain slippage and pocket wear.<br />
• Encapsulated needle bearings and side plate bearings for<br />
smoother operation.<br />
• Brake lockout bearing for security of braking mechanism.<br />
• Key internal components are CNC machined before being<br />
heat-treated and toughened.<br />
• Fitted with high quality European zinc plated Grade 80 load chain.<br />
• No aluminium content which ensures suitability for mining applications.<br />
• Overall better design and improved fi nish to prolong life expectancy.<br />
ORDER CODE<br />
Capacity<br />
Lift Height (m)<br />
Test Load (kg)<br />
Effort to lift<br />
full load (N)<br />
No. of Falls<br />
Hand Chain<br />
(mm x mm)<br />
Hand Chain<br />
Drop (m)<br />
Load Chain<br />
(mm x mm)<br />
Net Weight for<br />
3m Lift (kg)<br />
Pacific Hoists<br />
Part No.<br />
204175 250 kg 3 375 190 1 Ø5 x 23.7 2 Ø4 x 12 6 PCB301<br />
204176 250 kg 6 375 190 1 Ø5 x 23.7 5 Ø4 x 12 6 PCB302<br />
204177 500 kg 3 750 210 1 Ø5 x 23.7 2 Ø5 x 15 9 PCB303<br />
204178 500 kg 6 750 210 1 Ø5 x 23.7 5 Ø5 x 15 9 PCB306<br />
204179 1 tonne 3 1500 285 1 Ø5 x 23.7 2 Ø6.3 x 19 12 PCB313<br />
204180 1 tonne 6 1500 285 1 Ø5 x 23.7 5 Ø6.3 x 19 12 PCB316<br />
204181 1.5 tonne 3 2250 325 1 Ø5 x 23.7 2 Ø7.1 x 21 14 PCB318<br />
204182 1.5 tonne 6 2250 325 1 Ø5 x 23.7 5 Ø7.1 x 21 14 PCB319<br />
204183 2 tonne 3 3000 355 1 Ø5 x 23.7 2 Ø8 x 24 20 PCB323<br />
204184 2 tonne 6 3000 355 1 Ø5 x 23.7 5 Ø8 x 24 20 PCB326<br />
204185 3 tonne 3 4500 340 2 Ø5 x 23.7 2 Ø7.1 x 21 23 PCB333<br />
204186 3 tonne 6 4500 340 2 Ø5 x 23.7 5 Ø7.1 x 21 23 PCB336<br />
204187 5 tonne 3 7500 400 2 Ø5 x 23.7 2 Ø9 x 27 39 PCB353<br />
204188 5 tonne 6 7500 400 2 Ø5 x 23.7 5 Ø9 x 27 39 PCB356<br />
204189 10 tonne 3 15000 540 4 Ø5 x 23.7 2 Ø9 x 27 65 PCB359<br />
204190 10 tonne 6 15000 540 4 Ø5 x 23.7 5 Ø9 x 27 65 PCB360<br />
*Pacific chain blocks with customised lift heights are available<br />
170<br />
1300 722 999
- The load chain in a lever hoist is designed to be used in a<br />
straight load only (Example 1)<br />
- Always seat the hook directly to the load<br />
- Hooks are to be AXIALLY loaded not TIP loaded (Example 2)<br />
Lever Blocks<br />
BOSS Lever Block: Unit of Measure - Each<br />
• Stainless steel ID plates and rivets (suitable for underground<br />
mining applications).<br />
• Fully machined lift wheel.<br />
• Lightweight robust construction.<br />
• Minimum headroom.<br />
• Proof tested in accordance with Australian Standards.<br />
• Cast steel safety latches.<br />
• Test Certificate supplied with each unit.<br />
• Load chain guide to ensure load chain fi ts positively within the lift wheel.<br />
• Individually serial numbered for complete traceability.<br />
• Spare parts available.<br />
• Fully enclosed gear train.<br />
• Super strength alloy load chain.<br />
• Twin pawl ratchet system.<br />
Example 1 Example 2<br />
ORDER CODE<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Capacity (tonnes)<br />
Lift (m)<br />
Handle (mm)<br />
Chain Dia. (mm)<br />
Headroom (mm)<br />
Width (mm)<br />
Depth (mm)<br />
Top/Bottom Hook<br />
Opening (mm)<br />
Weight (kg)<br />
201146 0.25 1 300 4 230 92 72 21 1.5<br />
201147 0.5 1.5 300 5 260 105 78 35 4<br />
201139 0.75 1.5 280 6 325 148 90 30 7<br />
201166 0.75 3 280 6 325 148 90 30 8.8<br />
201140 1.5 1.5 410 8 380 172 98 35 11<br />
201222 1.5 3 410 8 380 172 98 35 14<br />
201141 3.0 1.5 410 10 480 200 115 40 21<br />
201231 3.0 3 410 10 480 200 115 40 25.2<br />
201149 6.0 1.5 410 10 620 200 115 50 21<br />
201241 6.0 3 410 10 620 200 115 52 31<br />
201244 9.0 1.5 410 10 700 200 115 58 46<br />
Other capacities and lift sizes available.<br />
WWW.BULLIVANTS.COM 171
PWB Kito L5 Lever Block: Unit of Measure - Each<br />
Model LX<br />
Model L5<br />
PWB Kito L5 With Overload Limiter:<br />
Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
The PWB Anchor L5 Series Lever Hoist from KITO offers the<br />
largest range of capacities in the market that best suit your<br />
application.<br />
Lightweight, compact and designed for heavy-duty work in the<br />
most rigorous and demanding applications. All models feature<br />
the patented ‘free-wheel safety brake mechanism’ and nickel<br />
plated load chain.<br />
Optional lift heights also available.<br />
Compact and portable the 250kg and 500kg capacity units are<br />
an ideal Lever Hoist for lifting, lowering or positioning of loads<br />
that can be carried and stored in your toolbox.<br />
250kg Capacity Unit supplied with polyester carry case for belt<br />
attachment.<br />
Complementing the existing KITO L5 Lever Hoist range is<br />
the ‘Overload Limiter’ model, designed for improved safety<br />
and durability. These models prevent the hoist mechanism<br />
from damage in the event of overload by activating the<br />
overload limiter via the friction clutch.<br />
ORDER CODE<br />
Capacity<br />
Headroom (mm)<br />
Load Chain Dia<br />
(m) x Fall<br />
Mass (kg)<br />
PWB Part No<br />
ORDER CODE<br />
172<br />
Capacity (tonnes)<br />
Standard Lift (m)<br />
Hand Effort to Lift<br />
Load N (kg)<br />
Handle Length<br />
(mm)<br />
Headroom min<br />
(mm)<br />
201406 0.25 1.0 200 (20) 150 205 1.6 44200<br />
201407 0.5 1.2 310 (31) 180 246 2.6 44201<br />
201167 0.8 1.5 284/(29) 245 280 5.7 44202<br />
203839 1.0 1.5 353/(36) 245 300 5.9 44203<br />
201225 1.6 1.5 333/(34) 265 335 8 44204<br />
201408 2.5 1.5 363 (37) 265 375 11.6 44205<br />
201236 3.2 1.5 363/(37) 415 395 15 44206<br />
201402 6.3 1.5 372 (38) 415 540 27.0 44207<br />
201403 9.0 1.5 382 (39) 415 680 42.0 44208<br />
201409 0.8 3.0 284 (29) 245 280 6.5 45890<br />
201410 1.6 3.0 333 (34) 265 335 8.5 45891<br />
201411 3.2 3.0 363 (37) 415 395 15.5 45892<br />
201412 6.3 3.0 372 (38) 415 540 30.0 45893<br />
Weight (kg)<br />
PWB Part No.<br />
201518 800kg 280 5.6 x 1 6.0 63090<br />
201519 1 tonne 300 5.6 x 1 6.2 63091<br />
201520 1.6 tonne 335 7.1 x 1 8.4 63092<br />
201522 2.5 tonne 375 8.8 x 1 11.6 63093<br />
201523 3.2 tonne 395 10 x 1 15.2 63094<br />
201525 6.3 tonne 540 10 x 2 26.2 63095<br />
201526 9 tonne 680 10 x 3 40.2 63096<br />
1300 722 999
Pacific Hoists Vital Lever Blocks: Unit of Measure - Each<br />
NR Series & VR Mining Series Features<br />
• Manufactured in Japan using optimum high quality steel<br />
• One-touch operation for free chain adjustment (NR-Series)<br />
• Easy two-step operation to prevent accidental free-wheeling (VR-Series)<br />
• Vital lever blocks can be supplied with overload protection for added security<br />
of use (excluding 250kg and 500kg models)<br />
• The unique design of the bottom hook prevents slipping and ensures safe<br />
operation<br />
• Hardened alloy steel load chain with embossed identification, marked to the<br />
relevant standards<br />
• Exceeds Australian Standards with 5:1 Safety Factor<br />
• Minimum load requirement of up to 10% of the Working Load Limit to ensure<br />
the operation of the braking system. E.g. a 1.5 tonne lever block requires a<br />
minimum load of 150kg (NR Series)<br />
• Light loading; the NR-Series is not suitable for tandem operations. For these<br />
applications we recommend the Vital Lever Blocks VR-2 series<br />
Applications<br />
• Suitable for industrial, rural, shipbuilding, construction and mining industries<br />
Specifications<br />
• All Vital models are manufactured to comply with the strict JIS & ISO<br />
regulations and AS1418.2<br />
ORDER CODE<br />
Capacity (tonnes)<br />
Load Chain<br />
Diameter (mm)<br />
Lift (m)<br />
Mass (kg)<br />
Series<br />
Pacific Hoists<br />
Part No.<br />
201210 0.5 5.0 1.5 3.5 NR VLB205<br />
201148 0.8 5.6 1.5 6.0 NR VLB207<br />
201216 1.0 6.3 1.5 7.2 NR VLB210<br />
201171 1.6 7.1 1.5 9.8 NR VLB215<br />
201172 3.2 9.0 1.5 16.6 NR VLB230<br />
201239 6.3 9.0 1.5 27.0 NR VLB260<br />
201589 9.0 9.0 1.5 47.3 NR VLB290<br />
201165 0.8 6.3 1.5 6.9 VR VLB107<br />
NR Series<br />
VR Series<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
201414 1.6 7.1 1.5 9.7 VR VLB115<br />
201415 3.2 9.0 1.5 16.3 VR VLB130<br />
201416 6.3 9.0 1.5 26.7 VR VLB160<br />
201590 0.8 5.6 1.5 6.0 NR with Overload VLB207L<br />
201591 1.0 6.3 1.5 7.2 NR with Overload VLB210L<br />
201592 1.6 7.1 1.5 9.8 NR with Overload VLB215L<br />
201593 3.2 9.0 1.5 16.6 NR with Overload VLB230L<br />
201594 6.3 9.0 1.5 27.0 NR with Overload VLB260L<br />
201595 9.0 9.0 1.5 47.3 NR with Overload VLB290L<br />
201596 0.8 6.3 1.5 6.9 VR with Overload VLB107L<br />
201597 1.6 7.1 1.5 9.7 VR with Overload VLB115L<br />
201598 3.2 9.0 1.5 16.3 VR with Overload VLB130L<br />
201599 6.3 9.0 1.5 26.7 VR with Overload VLB160L<br />
Other heights of lift available.<br />
WWW.BULLIVANTS.COM 173
08 - <strong>MATERIALS</strong> HANDLING<br />
Pacific Hoists Lever Blocks: Unit of Measure - Each<br />
The extensive range of Pacific Lever Blocks feature superior quality at an<br />
affordable price. They are well suited for applications in the mining, construction,<br />
transport and automotive industry. A patented Overload Limiting device is<br />
available to improve safety.<br />
Features<br />
• All Pacific models are manufactured to comply with AS1418.2.<br />
• “T” type hooks for improved load holding integrity (except for<br />
the 250kg capacity).<br />
• New design double pawl safety springs to eliminate sticking.<br />
• New style cast hand wheel for added strength and durability.<br />
• Encapsulated needle bearings and side plate bearings for<br />
smoother operation.<br />
• Brake lockout bearing for security of braking mechanism.<br />
• All Pacific lever blocks can be supplied with overload protection<br />
(except 250kg).<br />
• Key internal components are CNC machined before being heat-treated<br />
and toughened.<br />
• Fitted with high quality European zinc plated Grade 80 load chain.<br />
• No aluminium content which ensures suitability for mining applications.<br />
• Overall better design and improved fi nish to prolong life expectancy.<br />
ORDER CODE<br />
Capacity<br />
Lift Height (m)<br />
Test Load (kg)<br />
Effort to Lift Full<br />
Load (N)<br />
No. of Falls<br />
Load Chain (mm<br />
x mm)<br />
Length of Lever<br />
Handle (D) (mm)<br />
Net Weight for 3m<br />
Lift (kg)<br />
Pacific Hoists Part<br />
No.<br />
204205 250kg 1.5 375 115 1 Ø4 x 12 168 1.86 PLB302<br />
204206 500kg 1.5 750 248 1 Ø5 x 15 253 4.42 PLB305<br />
204207 800kg 1.5 1200 285 1 Ø5.6 x 17 273 5.71 PLB308<br />
204208 1.6 tonne 1.5 2400 315 1 Ø7.1 x 21 378 9.27 PLB316<br />
204209 3.2 tonne 1.5 4800 360 1 Ø10 x 28 418 16.50 PLB332<br />
204210 6.3 tonne 1.5 9450 370 2 Ø10 x 28 418 21.29 PLB363<br />
*Pacific lever blocks with customised lift heights are available.<br />
Lifting Clamps<br />
Push Trolley: Unit of Measure - Each<br />
• Lightweight robust construction.<br />
• Complete assembly instructions supplied.<br />
• Individually serial numbered for complete traceability.<br />
• Minimum headroom.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Beam range<br />
(mm)<br />
Test Load<br />
(kN)<br />
Weight (kg)<br />
203247 0.5 64-152 7.35 7<br />
203245 1 64-210 14.71 14<br />
203248 2 89-210 29.42 21<br />
203249 3 102-210 44.13 35<br />
203250 5 114-210 61.29 48<br />
203278 10 125-210 122.58 88<br />
Other capaciities available.<br />
174<br />
1300 722 999
Geared Trolley<br />
Girder Clamp: Unit of Measure - Each<br />
• Lightweight robust construction.<br />
• Complete assembly instructions supplied.<br />
• Individually serial numbered for complete traceability.<br />
• Minimum headroom.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Beam range<br />
(mm)<br />
Test Load<br />
(kN)<br />
Weight (kg)<br />
203261 1 64-210 14.71 18<br />
203246 2 89-210 29.42 26<br />
203262 3 102-210 44.13 41<br />
203265 5 114-210 61.29 54.5<br />
203268 10 125-210 122.58 95<br />
Beam Trolley Clamp: Unit of Measure - Each<br />
• Robust all-steel construction.<br />
• Low weight.<br />
• Individually serial numbered for complete traceability.<br />
• Quick and easy adjustment to suit any beam width<br />
and range.<br />
• Compact size - ease of installation.<br />
• Minimum headroom.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Beam range<br />
(mm)<br />
Weight (kg)<br />
203284 1 75-230 4.5<br />
203285 2 75-230 5<br />
203286 3 80-320 10.5<br />
203287 5 90-320 11<br />
203298 10 90-320 16<br />
Vertical Lifting Clamp: Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
• Fully adjustable.<br />
• Fitted with adjustment safety locking mechanism<br />
and fitted with Anti Drop Plates.<br />
• Safe, quick and easy to install and use.<br />
• Complies with AS1418.2.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Beam range<br />
(mm)<br />
Weight (kg)<br />
203252 1 63-210 10.5<br />
203254 2 76-210 12.5<br />
203255 3 76-210 22.5<br />
203256 5 100-305 42<br />
• Fitted with safety locking mechanism - ensures<br />
safe process of lifting.<br />
• Minimal working parts - minimal maintenance requirements.<br />
• Easy operation - ease of use.<br />
• Spare parts, repairs and re-certification available from<br />
your nearest Bullivants branch.<br />
• Individually serial numbered for complete traceability.<br />
• Test certificate supplied with each unit.<br />
WWW.BULLIVANTS.COM 175<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Jaw Opening<br />
(mm)<br />
Weight (kg)<br />
203281 1 0-22 3.6<br />
203282 2 0-30 6<br />
203291 3 0-35 9.2<br />
203292 5 5-45 16.5
Gunnebo LiftiQ Pipe hooks: Unit of Measure - Each<br />
Gunnebo LiftiQ Standard Vertical Lifting Clamp:<br />
Unit of Measure - Each<br />
For horizontal lifting and transporting of steel and concrete<br />
pipes.<br />
To be used in pairs.<br />
For vertical lifting and transporting of steel plates and<br />
structures.<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Jaw Opening<br />
(mm)<br />
Total Length<br />
(mm)<br />
Weight (kg)<br />
204044 1.5 40 185 1.6<br />
204045 3.0 40 185 1.6<br />
204046 4.0 50 180 3.0<br />
204047 6.0 50 180 3.3<br />
204048 8.0 70 200 3.6<br />
204049 8.0 60 330 18.0<br />
203810 12 70 200 6.0<br />
Gunnebo LiftiQ Horizontal Clamps: Unit of Measure - Each<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Jaw Opening<br />
(mm)<br />
Total Length<br />
(mm)<br />
Weight (kg)<br />
204005 1.0 0-25 265 3.6<br />
204050 1.5 0-20 335 6.3<br />
204006 2.0 0-35 335 6.5<br />
204007 3.0 0-35 335 6.7<br />
204008 4.5 0-45 430 16.0<br />
204009 6.0 0-32 490 18.6<br />
204051 7.5 0-55 530 25.0<br />
204010 9.0 0-55 530 26.0<br />
204011 12 0-52 617 42.0<br />
204012 15 0-76 550 71.0<br />
204013 20 0-80 880 140<br />
204014 25 5-85 880 140<br />
Available with enlarged jaw opening: 2,000 -<br />
30,000 kg capacities<br />
For horizontal lifting and transporting of steel plates.<br />
Must allways be used in pairs or multiples thereof.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Jaw Opening<br />
(mm)<br />
Total Length<br />
(mm)<br />
Weight (kg)<br />
203997 1 0-35 188 2.6<br />
203998 2 0-60 290 7.5<br />
203999 3 0-60 293 8.0<br />
204000 4 0-60 306 13.0<br />
204001 6 0-60 306 13.0<br />
204002 8 0-60 335 18.0<br />
204003 10 0-60 335 20.0<br />
204004 12 0-60 335 21.0<br />
Available with enlarged jaw opening: 2,000 -<br />
15,000 kg capacities<br />
176<br />
1300 722 999
Gunnebo LiftiQ Universal Vertical Lifting Clamp:<br />
Unit of Measure - Each<br />
Gunnebo LiftiQ Universal Screw Clamps:<br />
Unit of Measure - Each<br />
For vertical lifting and transporting of steel plates and structures<br />
from all positions (horizontal, vertical & sidelong).<br />
Equipped with articulating lifting shackle.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Jaw Opening<br />
(mm)<br />
Total Length<br />
(mm)<br />
Weight (kg)<br />
204015 1.0 0-25 285 3.9<br />
204052 1.5 0-20 350 7.2<br />
204016 2.0 0-35 380 7.3<br />
204017 3.0 0-35 385 7.5<br />
204018 4.5 0-45 425 17<br />
204019 6.0 0-32 520 21<br />
204053 7.5 0-55 560 30<br />
204020 9.0 0-55 650 32<br />
204021 12 0-52 650 45<br />
204022 15 0-76 635 75<br />
204023 20 0-80 830 145<br />
204024 25 5-85 830 148<br />
Available with enlarged jaw opening: 2,000 -<br />
25,000 kg capacities<br />
For vertical and horizontal lifting and transporting of a large<br />
variety of steel structures.<br />
Articulating lifting eye ensures an effective clamping force in<br />
every position.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Jaw opening<br />
(mm)<br />
Total length<br />
(mm)<br />
Weight (kg)<br />
204054 0.5 0-28 113 0.8<br />
204055 0.75 0-22 201 3<br />
204056 1.5 0-32 187 4<br />
204057 3 0-50 224 7<br />
204058 6 0-75 291 18<br />
Gunnebo LiftiQ Non Marking Clamps c/w Synthetic Pads:<br />
Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
For lifting, handling and transporting of steel, aluminium, wood<br />
and marble plates.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Jaw Opening<br />
(mm)<br />
Total length<br />
(mm)<br />
Weight (kg)<br />
204026 0.5 1-20 360 5.5<br />
204027 1 1-30 400 6.5<br />
204028 1.5 1-40 400 7.2<br />
204029 2 1-50 660 14<br />
204030 3 1-60 660 15<br />
WWW.BULLIVANTS.COM 177
PWB Push & Geared Trolleys<br />
Designed to travel along RSJ, universal beams and universal<br />
columns, the PWB Anchor range of push and geared trolleys<br />
suits a variety of beam widths to provide the easiest and most<br />
convenient means to moving a load.<br />
PWB Push Trolley: Unit of Measure - Each<br />
PWB Geared Trolley: Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
ORDER CODE<br />
ORDER CODE<br />
Capacity<br />
Capacity<br />
Beam Range (mm)<br />
Headroom (mm) *<br />
Wheel Dia. Running<br />
Surface (mm)<br />
Min. Radius (m)<br />
PWB Part No **<br />
Beam Range (mm)<br />
Headroom (mm)<br />
Wheel Dia. Running<br />
Surface (mm)<br />
204130 250kg 32 - 51 86 48 0.9 44439<br />
204131 500kg 64 - 152 110 58 0.9 49175<br />
204132 500kg 64 - 210 110 58 0.9 49353<br />
204133 500kg 210 - 270 110 58 0.9 49354<br />
204134 1 tonne 64 - 210 136 88 0.9 49176<br />
204135 1 tonne 210 - 268 136 88 0.9 49355<br />
204136 1 tonne 268 - 330 136 88 0.9 49282<br />
204137 2 tonne 89 - 210 155 100 1.5 49177<br />
204138 2 tonne 210 - 268 155 100 1.5 44103<br />
204139 2 tonne 268 - 330 155 100 1.5 44641<br />
204140 3 tonne 102 - 210 200 130 1.8 49178<br />
204141 3 tonne 210 - 268 200 130 1.8 49179<br />
204142 3 tonne 268 - 330 200 130 1.8 49696<br />
204143 4 tonne 102 - 210 200 130 1.8 49338<br />
204144 5 tonne 114 - 210 252 155 2.4 49180<br />
204145 5 tonne 210 - 268 252 155 2.4 49181<br />
204146 5 tonne 268 - 330 252 155 2.4 49296<br />
204148 10 tonne 127 - 210 288 195 3.7 49182<br />
204149 10 tonne 210 - 330 288 195 3.7 49760<br />
Min. Radius (m)<br />
PWB Part No<br />
204151 1 tonne 64 - 210 136 88 0.9 49183<br />
204153 2 tonne 89 - 210 155 100 1.5 49184<br />
204154 2 tonne 210 - 268 155 100 1.5 44102<br />
204155 3 tonne 102 - 210 200 130 1.8 49185<br />
204156 3 tonne 210 - 268 200 130 1.8 49186<br />
204157 3 tonne 268 - 330 200 130 1.8 62318<br />
204158 4 tonne 102 - 210 200 130 1.8 49605<br />
203266 5 tonne 114 - 210 252 155 2.4 49187<br />
204159 5 tonne 210 - 268 252 155 2.4 49188<br />
204160 5 tonne 268 - 330 252 155 2.4 49625<br />
204162 10 tonne 127 - 210 288 195 3.7 49189<br />
203269 10 tonne 210 - 330 288 195 3.7 64124<br />
204163 20 tonne 210 - 330 270 150 NA 64125<br />
*Running surface of track wheel to hooking surface of<br />
hanger plate.<br />
** 2.5 metre standard drop hand chain (optional lengths<br />
available on request).<br />
178<br />
1300 722 999
PWB Girder Clamps: Unit of Measure - Each<br />
Featuring a single threaded adjustment pin, for simple and easy installation,<br />
PWB Anchor Girder Clamps are supplied in a durable electrostatic enamel finish.<br />
ORDER CODE<br />
Capacity<br />
Beam Range<br />
(mm)<br />
Headroom<br />
(min/mm)<br />
Headroom<br />
(max/mm)<br />
Suspension<br />
Pin. Dia. (mm)<br />
Weight (kg)<br />
PWB Part No<br />
204164 1 tonne 65 - 230 78 135 20.3 4.8 48246<br />
203296 2 tonne 65 - 230 78 135 20.3 5.5 48247<br />
204165 3 tonne 100 - 250 100 160 22.1 11.8 48248<br />
204166 5 tonne 100 - 320 119 159 40.0 16.0 48249<br />
204167 10 tonne 130 - 320 150 205 53.0 31.0 48476<br />
NOTE: Maximum headroom for narrowest beam width decreases as beam<br />
width is increased.<br />
PWB Multi Directional Lifting Clamps: Unit of Measure - Each<br />
Model SBB Features Include:<br />
• Patented unique ‘torque confi rmation device’ (visible<br />
red ring indicates when tightening force is achieved)<br />
• For horizontal and vertical lifting applications<br />
• Spring type pressure lock locking device<br />
• Twin shackle allows movement in both directions<br />
• Double safety feature with screw type vice and automatic clamping mechanism<br />
• Main body forged special alloy with galvanised fi nish<br />
• Clamp screw and swivel jaw made of alloy steel and induction hardened<br />
• Tightening force must be minimum of 150kgf-cm<br />
• Conforms to AS4991<br />
ORDER CODE<br />
WLL (tonnes)<br />
Effective<br />
Thickness<br />
(mm)<br />
Hardness<br />
Range<br />
204032 0.5 1-40 Hv 85-320 1.8 SBB-05<br />
204033 1.0 1-40 Hv 85-320 4.0 SBB-1<br />
204034 2.0 1-40 Hv 85-320 7.6 SBB-2<br />
204035 3.0 5-35 Hv 85-320 8.3 SBB-3<br />
204036 5.0 10-40 Hv 85-320 14.3 SBB-5<br />
Weight (kg)<br />
Model<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Model SBBA Features Include:<br />
• Patented unique ‘torque confi rmation device’ (visible<br />
red ring indicates when tightening force is achieved)<br />
• Suitable for most bisalloy steel<br />
• Spring type pressure lock locking device<br />
• Twin shackle allows movement in both directions<br />
• Double safety feature with screw type vice and automatic clamping mechanism<br />
• Main body forged special alloy with galvanised fi nish<br />
• Clamp screw and swivel jaw made of alloy steel and induction hardened<br />
• For steel plate with higher hardness range<br />
• Tightening force on SBBA must be minimum of 300kgf-cm<br />
• Conforms to AS4991<br />
ORDER CODE<br />
WLL (tonnes)<br />
Effective<br />
Thickness (mm)<br />
Hardness Range<br />
Weight (kg)<br />
Model<br />
204037 0.5 1-40 Hv 85-600 1.8 SBBA-05<br />
204038 1.0 1-40 Hv 85-600 4.0 SBBA-1<br />
204039 2.0 1-40 Hv 85-600 7.6 SBBA-2<br />
204040 3.0 5-35 Hv 85-600 8.3 SBBA-3<br />
WWW.BULLIVANTS.COM 179
PWB Drum Clamps<br />
Three designs are available to provide safe, fast lifting and<br />
repositioning of 205 Litre (44 gallon) drums, with or without lids.<br />
Features Include:<br />
• Main body made of high tensile steel with welded<br />
construction that is resistant to cracks<br />
• Design factor 5:1<br />
• Manufactured in accordance with test requirements<br />
of AS4991<br />
• Epoxy paint finish<br />
PWB Vertical Drum Clamp: Unit of Measure - Each<br />
Pacific Hoists Pipe Trolley: Unit of Measure - Each<br />
• Designed for pipe beams.<br />
• Lightweight with painted finish.<br />
• Suited for min. curve radius of 0.8m<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
• Drum clamp for drums with lids.<br />
ORDER CODE<br />
Drum Size<br />
(litres)<br />
Capacity<br />
(tonnes)<br />
Headroom<br />
(mm)<br />
Weight (kg)<br />
203283 200 0.5 152 5<br />
PWB Horizontal Drum Clamp: Unit of Measure - Each<br />
• Horizontal drum clamp for lifting drums with lids.<br />
ORDER CODE<br />
Drum Size<br />
(litres)<br />
Capacity<br />
(tonnes)<br />
Headroom<br />
(mm)<br />
Weight (kg)<br />
Suspension<br />
hole Dia (mm)<br />
203283 200 0.5 152 5 50<br />
PWB Drum Tong: Unit of Measure - Each<br />
ORDER CODE<br />
Capacity (kg)<br />
Beam range<br />
(mm)<br />
Weight (kg)<br />
Pacific Hoists<br />
Part No.<br />
203747 300 60 2.5 PPT203<br />
Pacific Hoists Horizontal Plate Clamp:<br />
Unit of Measure - Each<br />
• For horizontal lifting and transportation of non-sagging<br />
steel plates.<br />
• Compact shape, low weight and high lifting capacity.<br />
• Must be used in pairs (or multiples of).<br />
• Fitted with optional spring mechanism to ensure jaw<br />
remains in contact with place in a no-load situation<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Max. Plate<br />
Width (kg)<br />
Pacific Hoists<br />
Part No.<br />
204221 2 0 - 60 CLP516<br />
• Vertical drum tong for lifting drums without lids.<br />
180<br />
ORDER CODE<br />
Drum Size<br />
(litres)<br />
Capacity<br />
(tonnes)<br />
Headroom<br />
(mm)<br />
Weight (kg)<br />
203294 200 0.5 520 12.5<br />
203313 3 0 - 60 CLP531<br />
204223 3 60 - 120 CLP536<br />
203317 6 0 - 60 CLP561<br />
204225 6 60 - 120 CLP571<br />
204222 9 0 - 60 CLP091<br />
204227 9 60 - 120 CLP096<br />
1300 722 999
Pacific Hoists Universal Lifting Clamp:<br />
Unit of Measure - Each<br />
Pacific Hoists Vertical Drum Clamp: Unit of Measure - Each<br />
• Subject to rigorous quality control for maximum reliability<br />
• Market leader world wide<br />
• Test Certificate and instruction manual supplied with<br />
all products<br />
• All ‘IP’ vertical plate clamps may be used to lift materials<br />
with a hardness of up to 345 Brinell (37 Rc)<br />
This model is based on the IP10 lifting clamp but is equipped<br />
with a universal (hinged) hoisting eye, thus making it possible<br />
to lift loads from any given direction. The IPU 10 clamp is also<br />
very useful in applications where larger plates are to be lifted<br />
with two clamps in combination with a two-legged chain.<br />
ORDER CODE<br />
WLL (tonnes)<br />
Jaw Opening<br />
(mm)<br />
Model<br />
Pacific Hoists<br />
Part No.<br />
203978 0.5 0-16 0.5-IPU10 CLP005<br />
203979 1 0-20 1-IPU10 CLP010<br />
203980 2 0-35 2-IPU10 CLP020<br />
203981 3 0-40 3-IPU10 CLP030<br />
203982 4.5 0-40 4.5-IPU10 CLP040<br />
• Complies with Australian Standard AS4991.<br />
• Subject to rigorous quality control for maximum reliability.<br />
• Test certificate and instruction manual supplied with<br />
all products.<br />
• Bears the CE mark for quality.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Jaw Size (mm)<br />
Weight (kg)<br />
Pacific Hoists<br />
Part No.<br />
203293 0.5 300 7.1 CLP910<br />
Other capacities available.<br />
Pacific Hoists Girder Clamps: Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
203983 6 0-50 6-IPU10 CLP060<br />
203984 9 0-50 9-IPU10 CLP070<br />
203985 9 50-100 9-IPU10/J CLP071<br />
203986 12 0-54 12-IPU10 CLP080<br />
203987 12 54-108 12-IPU10/J CLP081<br />
Features<br />
• Can be used to safely suspend a chain block or hoist<br />
from an I - beam<br />
• Also suitable for lifting I - beams, usually in pairs<br />
• Can be used at up to 45° angle, derated by 50%<br />
• Adjustable to suit a wide range of girder sizes<br />
• Can be easily repositioned and are simple to install by<br />
clamping the jaws over the girder flanges<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Beam Range<br />
(mm)<br />
Headroom<br />
(mm)<br />
Mass (kg)<br />
Pacific Hoists<br />
Part No.<br />
204097 1.0 80 - 245 150 3.5 PGC310<br />
204098 2.0 80 - 245 155 4.5 PGC320<br />
204099 3.0 90 - 310 225 9.5 PGC330<br />
204100 5.0 90 - 310 225 11.0 PGC350<br />
204101 10.0 90 - 310 235 16.0 PGC390<br />
WWW.BULLIVANTS.COM 181
Pacific Hoists Adjustable Angle Clamps:<br />
Unit of Measure - Each<br />
Pacific Hoists Self-Locking Beam Trolleys:<br />
Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Features<br />
Pacifi c Adjustable Angle Clamps are suitable for a wide<br />
range of angle sections and will prove to be a cost-effective<br />
way of suspending loads. They feature an adjustable locking<br />
pin for safe and easy attachment which makes them ideally<br />
suited for the rigging industry. All clamps are designed and<br />
tested in accordance with Australian Standard AS4991.<br />
• Designed and tested in accordance with<br />
Australian Standard AS4991.<br />
• Quick and easy installation with no tools required.<br />
• Suitable for a wide range of angle sections.<br />
• Inclusive of an adjustable locking pin for safe and<br />
easy attachment.<br />
• Features a V-type clamping jaw which secures the<br />
clamp to the angle section.<br />
• A cost-effective and time saving way of suspending loads.<br />
• This clamp can be used as both an anchor and<br />
suspension device.<br />
• Ideal for the rigging industry.<br />
ORDER CODE<br />
Rated<br />
Capacity<br />
Beam Size<br />
(mm)<br />
Weight (kg)<br />
Pacific Hoists<br />
Part No.<br />
204171 500 kg 38 - 101 4.0 CLP253<br />
204172 1 tonne 38 - 101 4.5 CLP254<br />
204173 1.5 tonne 50 - 152 11.0 CLP255<br />
204174 3 tonne 101 - 203 21.5 CLP256<br />
Features<br />
Pacific Self-locking Beam Trolleys feature a robust design<br />
in accordance with Australian Standard AS1418.2. The spring<br />
assisted locking pin enables quick and easy installation which<br />
makes this trolley ideally suited for the rigging industry.<br />
• Designed and tested in accordance with<br />
Australian Standard AS1418.2.<br />
• Quick and easy installation with no tools required.<br />
• Suitable for a wide range of beam sizes.<br />
• Inclusive of a spring assisted locking pin for safe<br />
and easy attachment to the beam.<br />
• A cost-effective and time saving way of suspending loads.<br />
• Ideal for the rigging industry.<br />
ORDER CODE<br />
Rated<br />
Capacity<br />
Beam Size<br />
(mm)<br />
Weight (kg)<br />
Pacific Hoists<br />
Part No.<br />
204216 3 tonne 76 - 230 21 CLP250<br />
204217 6 tonne 100 - 305 32 CLP251<br />
204218 10 tonne 120 - 305 47.5 CLP252<br />
Pacific Top Girder Clamps: Unit of Measure - Each<br />
Features<br />
Pacifi c Top Girder Clamps are ideal for situations where<br />
quick and easy installation is required with no use of tools.<br />
They are suited to a wide range of beam sizes and the Low<br />
Profile Girder Clamp is the solution for applications where<br />
headroom is restricted. The locking pin with articulated handle<br />
will make this device easy to attach. Both the Standard and<br />
the Low Profi le clamps are designed and tested in<br />
accordance with Australian Standard AS4991.<br />
• Designed and tested in accordance with Australian<br />
Standard AS4991.<br />
• Quick and easy installation with no tools required.<br />
• Suitable for a wide range of beam sizes.<br />
• Available as a Low Profi le Girder Clamp for applications<br />
where headroom is restricted.<br />
• Inclusive of a locking pin with articulated handle for safe<br />
and easy fixture.<br />
• A cost-effective and time saving way of suspending loads.<br />
• This clamp can be used as both an anchor and suspension<br />
device.<br />
• Ideal for the rigging industry.<br />
182<br />
ORDER CODE<br />
Standard Top<br />
Girder Clamp<br />
Rated<br />
Capacity<br />
Head Room<br />
Beam Size<br />
(mm)<br />
Low Profile Top<br />
Girder Clamp<br />
Weight (kg)<br />
Pacific Hoists<br />
Part No.<br />
204219 200kg Standard 90 - 204 5.8 CLP257<br />
204220 200kg Low Profi le 90 - 180 4.5 CLP258<br />
1300 722 999
Pacific Hoists Series 1 Girder Trolleys - Twin Bolt:<br />
Unit of Measure - Each<br />
Pacific Hoists DrumGrab: Unit of Measure - Each<br />
Features<br />
• Choose from either push or hand-geared travel<br />
• Twin pin configuration provides closer headroom<br />
than single pin variety<br />
• Available to suit larger beam widths on request<br />
• Fitted with anti-drop plates for improved safety<br />
and compliance<br />
• Can be supplied close coupled to suit most Pacific hoists<br />
Specifications<br />
• All Pacific girder trolleys are manufactured to comply<br />
with AS1418.2.<br />
ORDER CODE<br />
Capacity (tonnes)<br />
Beam Range (mm)<br />
Min. Curve Radius<br />
Min. Beam Radius<br />
(mm)<br />
Head¬room (mm)<br />
Type<br />
Pacific Hoists<br />
Part No.<br />
204102 0.5 62 - 170 0.8 1500 67 Push PPT105<br />
203274 1.0 62 - 203 1.0 1500 82 Push PPT110<br />
204103 2.0 90 - 215 1.5 1800 130 Push PPT120<br />
203277 3.0 107 - 210 1.7 1800 130 Push PPT130<br />
204104 5.0 107 - 210 1.7 1800 130 Push PPT150<br />
204105 10.0 160 - 310 2.7 3000 160 Push PPT160<br />
204106 1.0 62 - 203 1.0 1500 67 Geared PGT110<br />
204107 2.0 90 - 215 1.5 1500 82 Geared PGT120<br />
203264 3.0 107-210 1.7 1800 130 Geared PGT130<br />
Features<br />
• Fits most 205L steel and plastic drums<br />
• Capable of extracting a drum from a cluster<br />
• Cast, using high quality dectile iron; conformed to<br />
Australian Standards (S.G. Iron 500/7 to AS141831)<br />
• Holds up to 1T easily<br />
• Robust and withstands harsh conditions<br />
Specifications<br />
• Complies with the Australian Standard AS4991.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Pacific Hoists<br />
Part No.<br />
203988 1 PDG100<br />
Pacific Hoists Safepour Drum Dispensers:<br />
Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
204108 5.0 107 - 210 1.7 1800 130 Geared PGT150<br />
204109 10.0 160 - 310 2.7 3000 160 Geared PGT160<br />
Features<br />
• Easy innovative way to safely decant with decreased<br />
risk of spillage and harm to user<br />
• Allows the safe pouring of liquids from 15L to 25L<br />
plastic containers and 44 gallon metal drums<br />
• Commended by Safety Authorities<br />
Applications<br />
Ideally used in agriculture, food manufacturing, hospitality,<br />
cleaning, chemical, horticulture, pool, spa and general<br />
manufacturing<br />
ORDER CODE<br />
Capacity<br />
Finish<br />
Pacific Hoists<br />
Part No.<br />
204125 15 - 25L Powdercoated SAF225<br />
204126 205L Powdercoated SAF230<br />
WWW.BULLIVANTS.COM 183
Pacific Hoists My - T - Lift Cranes: Unit of Measure - Each<br />
Magnetic Lifters<br />
Pacific Hoists Magnetic Lifters: Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Features<br />
• 360° manual radial slew; with slipper bearing thrust<br />
race for ease of slewing motion<br />
• Rugged structure with low maintenance powder<br />
coated finish<br />
• Folds down when not in use<br />
• Allows accurate placement of heavy loads, even<br />
in confined space<br />
• Available with manual winch, 12 or 24 volt electric winch<br />
• Optional drum lifting devices available<br />
ORDER CODE<br />
Capacity (kg)<br />
Operation<br />
Pacific Hoists<br />
Part No.<br />
204123 300 Manual - Hand MYT300<br />
204115 300 Electric - 12V MYT312<br />
204228 300 Electric - 24V MYT324<br />
NGK Grip Clamp: Unit of Measure - Each<br />
Features<br />
• Can be used in a variety of industries for the transportation<br />
and lifting of steel, engine parts, semi - manufactured goods<br />
and moulds<br />
• Due to its magnetic force there is no need to use slings,<br />
clamps or other holding devices eliminating surface damage<br />
• Once operated, the simple switch safety button design<br />
allows for one handed operation with the added unique<br />
release button guard for extra protection<br />
• Larger sizes available up to six tonnes<br />
• Permanent magnets require Minimal maintenance<br />
Specifications<br />
• Complies to AS4991:2004<br />
ORDER CODE<br />
Capacity (kg)<br />
Horizontal Plate<br />
For bare copper cable, covered conductor and messenger wire.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Capacity (kg)<br />
Vertical Plate<br />
Grip Range<br />
(mm)<br />
Capacity (kg)<br />
Round Bar<br />
Eye Size (mm)<br />
Max. Breakaway<br />
Force (kg)<br />
Weight (kg)<br />
Mass (kg)<br />
Pacific Hoists Part<br />
No.<br />
204067 100 50 50 350 3 MAG010<br />
203744 300 150 150 1050 10 MAG030<br />
203745 600 300 300 2100 24 MAG060<br />
203805 1000 500 500 3500 50 MAG100<br />
204068 2000 800 800 7000 125 MAG200<br />
204229 3000 1200 1200 10500 240 MAG300<br />
204230 6000 1800 1800 21000 440 MAG600<br />
203288 1 4-22 32 1.2<br />
203289 2 5-25 32 2.5<br />
203290 2 4-22 32 1.3<br />
203307 3 8-22 34 3.2<br />
203308 4 13-28 25 5<br />
184<br />
1300 722 999
Electric Hoists<br />
PWB Kito Electric Chain Hoists<br />
PWB Anchor ER2 Electric Hoists have been designed for<br />
superior load handling and positioning accuracy.<br />
Features Include:<br />
• 60% ED Intermittent rating (Duty Cycle)<br />
• Aluminium “corrosion” resistant body<br />
• Upper-Lower limit switch provided as standard<br />
• Dust proof and water-jet proof protection IP55 rating<br />
• Thermal protection to prevent motor from overheating<br />
• Original design, push button control with emergency stop -<br />
IP65 rating<br />
• Digital Hour Counter for appropriate maintenance<br />
• Grade 80 Nickle Plated load chain<br />
• Friction clutch for overload protection and over winding<br />
• Current-driven electromagnetic brake for secure load holding<br />
• Up to 50T Capacity available<br />
• Complies to AS1418.2<br />
• Longer height of lifts are available on request<br />
PWB Kito ER2 Electric Chain Hoist<br />
With safety, durability and ease of maintenance, the PWB Anchor<br />
ER2 Electric Chain Hoist manufactured by KITO is environmentally<br />
friendly with its new compact, lightweight and energy effi cient design. Offering thermal protection to prevent overheating, upper<br />
and lower limit switches, CH (Counter/Hour) meter and variable speed inverter as standard equipment.<br />
Available in capacities ranging from 250kg to 20 tonnes, in lift heights to suit<br />
your application.<br />
PWB Kito ER2 Electric Chain Hoist: Single Speed (415V-50Hz):<br />
Unit of Measure - Each<br />
Australian Standard AS1418.2, ASME HST (USA) H4 Duty Class.<br />
ISO Heavy Duty Classifi cation M4 & M5, FEM (Europe) 1Am & 2m rating.<br />
ORDER CODE<br />
Model No<br />
Capacity (tonnes)<br />
Stand.Lift (m)<br />
Lift Speed (m/min.)<br />
Headroom Hook<br />
Suspended min<br />
(mm)<br />
Load Chain (dia x<br />
falls)<br />
201417 ER2-003S 0.25 3.0 9.1 350 4.3 x 1 27.0 45801<br />
201418 ER2-003S 0.3 6.0 9.1 350 4.3 x 1 28.3 45961<br />
201419 ER2-005L 0.5 3.0 3.8 370 6.0 x 1 33.0 45802<br />
201420 ER2-005L 0.5 6.0 3.8 370 6.0 x 1 35.4 45962<br />
201421 ER2-005S 0.5 3.0 7.3 370 6.0 x 1 37.0 45803<br />
201422 ER2-005S 0.5 6.0 7.3 370 6.0 x 1 35.4 45963<br />
201423 ER2-010L 1.0 3.0 3.5 430 7.7 x 1 47.0 45804<br />
201424 ER2-010L 1.0 6.0 3.5 430 7.7 x 1 51.0 45964<br />
201425 ER2-010S 1.0 3.0 7.1 430 7.7 x 1 54.0 45805<br />
201426 ER2-010S 1.0 6.0 7.1 430 7.7 x 1 51.0 45965<br />
201427 ER2-015S 1.5 3.0 4.5 510 10.2 x 1 72.0 45806<br />
201428 ER2-015S 1.5 6.0 4.5 510 10.2 x 1 79.0 64121<br />
201429 ER2-020L 2.0 3.0 3.7 575 10.2 x 1 73.0 45807<br />
201430 ER2-020L 2.0 6.0 3.7 575 10.2 x 1 80.0 45966<br />
201431 ER2-020S 2.0 3.0 7.0 590 10.2 x 1 91.0 45808<br />
201432 ER2-025S 2.5 3.0 5.7 625 11.2 x 1 104.0 45809<br />
201433 ER2-030S 3.0 3.0 4.4 785 10.2 x 2 107.0 45810<br />
201434 ER2-030S 3.0 6.0 4.4 785 10.2 x 2 121.1 63130<br />
201435 ER2-050S 5.0 3.0 2.9 850 11.2 x 2 132.0 45811<br />
201436 ER2-050S 5.0 6.0 2.9 850 11.2 x 2 148.8 62866<br />
*5 metre power supply cable (plug not included)<br />
Weight (kg)<br />
PWB Part No.<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
WWW.BULLIVANTS.COM 185
PWB Kito EDL Compact Single Phase Electric Chain Hoist:<br />
Single and Dual Speed (240V-50Hz): Unit of Measure - Each<br />
EDL Electric Hoists are built to world class standards offering, reduced<br />
headroom, single die cast corrosion protected aluminium body and<br />
uncompromised safety standards.<br />
• 30% ED Rating<br />
• IP54/dust proof and water protected<br />
• Standard 240v 10amp power supply<br />
• Patented “Friction Clutch” allows for reliable Overload Protection and Safety<br />
• Upper Limit Switch<br />
• Motor has high performance mechanical brake for safe stopping<br />
• Nickel plated load chain – Added Resistance to rust and wear<br />
• Complies with AS1418.2<br />
• New IP65 Pendant with E/Stop<br />
• Special Cylinder Type for one hand operation<br />
• Dual Speed Hoists have a speed adjustment<br />
• Lightweight aluminium compact body<br />
Model EDL<br />
Model EDCL<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
ORDER CODE<br />
Capacity (kg)<br />
Single Speed - Pendant<br />
Model<br />
Standard Lift (m)<br />
Lift Speed (m/<br />
min.)<br />
Headroom (mm)<br />
Load Chain Dia.<br />
(mm) x Falls<br />
201448 100 EDL10S 3.0 13.0 315 4.0 x 1 12 45398<br />
201449 160 *EDL16S 3.0 20.0 330 4.0 X 1 16 48347<br />
201450 180 EDL18S 3.0 8.0 315 4.0 x 1 12 45399<br />
201451 240 *EDL24S 3.0 13.5 330 4.0 x 1 16 48348<br />
201452 480 EDL48S 3.0 6.7 520 4.0 x 2 21.5 62445<br />
Dual Speed - Pendant<br />
201453 100 EDL10ST 3.0 13.0/3.0 315 4.0 x 1 12.5 45400<br />
201454 160 *EDL16ST 3.0 20.0/5.0 330 4.0 x 1 16.5 44282<br />
201455 180 EDL18ST 3.0 8.0/3.0 315 4.0 x 1 12.5 45401<br />
201456 240 *EDL24ST 3.0 13.5/3.0 330 4.1 x 1 16.5 48349<br />
201457 480 EDL48ST 3.0 6.7/2.0 520 4.0 x 2 21.5 63624<br />
Weight (kg)<br />
PWB Part No.<br />
Dual Speed - Cylinder<br />
201458 100 EDCL10SD 3.0 13.0/3.0 945 4.0 x 1 15 45402<br />
201459 160 EDCL16SD 3.0 20.0/4.0 960 4.0 x 1 19 44157<br />
201460 240 EDCL24SD 3.0 13.5/3.0 960 4.0 x 1 19 44209<br />
*Models fitted with low voltage (30v) pendant control.<br />
PWB ANCHOR ENTERTAINMENT RANGE<br />
The range of CM Lodestar and Prostar Entertainment Hoists from PWB Anchor are easy to handle, operate<br />
and maintain. Protected by a lifetime warranty (conditions apply) and designed for versatile operation in the<br />
inverted position, the PWB Anchor range of Entertainment Hoists are supplied in a black powder coat finish<br />
for durability and are available in a range of capacities and are chained up to your specific lift requirements.<br />
186<br />
1300 722 999
PWB CM Lodestar Electric Hoist: Unit of Measure - Each<br />
The CM Lodestar is the ‘Riggers Choice’ and used extensively within the<br />
Entertainment Industry in all types of venues and applications. Supplied in lift<br />
heights to suit your requirements.<br />
Capacity<br />
Model<br />
Lift/Speed<br />
Load Chain Dia<br />
(mm) x fall<br />
Headroom (mm)<br />
500kg F 4 6.3 x 1 413<br />
1 tonne L 4 7.9 x 1 472<br />
2 tonne R 4 7.9 x 2 613<br />
2 tonne RR 2 7.9 x 2 613<br />
Other models and capacities available on request.<br />
PWB CM Prostar Electric Hoist: Unit of Measure - Each<br />
The CM Prostar model is designed and built for the unique rigging applications<br />
encountered at small venues. Lightweight, quiet and portable also featuring an<br />
overload protection device. Supplied in lift heights to suit your requirements.<br />
Capacity<br />
Model<br />
Lift/Speed (m/<br />
min.)<br />
Load Chain<br />
(mm)<br />
Headroom<br />
(mm)<br />
250kg 250 4 3.98 281<br />
Other models and capacities available on request.<br />
PWB Entertainment Clamp: Unit of Measure - Each<br />
In a distinctive black powder coat fi nish and simple installation, for use with the<br />
Entertainment Hoist range.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Beam Range<br />
(mm)<br />
Headroom<br />
(min./mm)<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Headroom<br />
(max./mm)<br />
Suspension<br />
Weight (kg)<br />
PWB Part No.<br />
204170 1 tonne 65-230 78 135 20.3 4.8 45785<br />
PWB Entertainment Shackle: Unit of Measure - Each<br />
The range of PWB Anchor Entertainment products is now extended to include<br />
Entertainment Shackles.<br />
Supplied in a distinctive black powder coat fi nish and manufactured to comply<br />
with the requirements of Australian Standard AS2741, these Shackles represent<br />
an easy and effective way of providing a connection of chain, wire rope or other<br />
rigging equipment.<br />
ORDER CODE<br />
Size (mm)<br />
WLL (tonnes)<br />
d (mm)<br />
D (mm)<br />
W (mm)<br />
L (mm)<br />
B (mm)<br />
e (mm)<br />
PWB Part No.<br />
122709 13 2.0 13 15 21 48 33 33 41794<br />
122710 16 3.25 16 20 27 61 43 40 41795<br />
122711 19 4.75 19 22 32 72 51 48 41796<br />
WWW.BULLIVANTS.COM 187
PWB Kito ER2 Electric Chain Hoist: Dual Speed (415V-50Hz) With Inverter:<br />
Unit of Measure - Each<br />
Australian Standard AS1418.2, ASME HST (USA) H4 Duty Class.<br />
ISO Heavy Duty Classification M4 & M5, FEM (Europe) 1Am & 2m rating.<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
ORDER CODE<br />
Model No<br />
Capacity (tonnes)<br />
Stand.Lift (m)<br />
Lift Speed (m/min.)<br />
Headroom Hook<br />
Suspended min (mm)<br />
Load Chain (dia x falls)<br />
Weight (kg)<br />
PWB Part NO.<br />
201437 ER2-003IS 0.3 3.0 10.8 - 1.8 350 4.3 x 1 27 45821<br />
201438 ER2-003IL 0.5 3.0 4.5 - 0.8 370 6.0 x 1 32 45822<br />
201439 ER2-005IS 0.5 3.0 8.5 - 0.8 370 6.0 x 1 36 45823<br />
201440 ER2-010IL 1.0 3.0 4.2 - 0.7 430 7.7 x 1 45 45824<br />
201441 ER2-010IS 1.0 3.0 8.2 - 1.4 430 7.7 x 1 52 45825<br />
201442 ER2-015IS 1.5 3.0 5.3 - 0.9 510 10.2 x 1 72 45826<br />
201443 ER2-020IL 2.0 3.0 4.3 - 0.7 575 10.2 x 1 73 45827<br />
201444 ER2-020IS 2.0 3.0 8.2 - 1.4 590 10.2 x 1 89 45828<br />
201445 ER2-025IS 2.5 3.0 6.6 - 1.1 625 11.2 X 1 100 45829<br />
201446 ER2-030IS 3.0 3.0 5.2 - 0.9 785 10.2 X 2 105 45830<br />
201447 ER2-050IS 5.0 3.0 3.3 - 0.6 850 11.2 X 3 128 45831<br />
*5 metre power supply cable (plug not included)<br />
PWB Kito MR2 Single and Dual Speed Motorised Trolleys:<br />
Unit of Measure - Each<br />
For use with PWB Anchor ER2 Electric hoist range.<br />
Wide beam models are available on request.<br />
ORDER CODE<br />
Model No<br />
Capacity<br />
(tonnes)<br />
Travel Speed<br />
(m/min.)<br />
Optional Travel<br />
Speed (m/min.)<br />
Min. Raduis<br />
Beam Range<br />
(mm)<br />
PWB Part No.<br />
Hoist and trolley<br />
combination shown.<br />
203989 MR2-010S 1.0 20.0 10.0 0.8 58 - 153 Flg 45901<br />
203990 MR2-020S 2.0 20.0 10.0 0.8 82 - 178 Flg 45902<br />
203991 MR2-030S 3.0 20.0 10.0 1.0 100 - 178 Flg 45903<br />
203992 MR2-050S 5.0 20.0 10.0 1.8 100 - 178 Flg 45904<br />
203993 MR2-010IS 1.0 20.0/4.0 n/a 0.8 58 - 153 Flg 45921<br />
203994 MR2-020IS 2.0 20.0/4.0 n/a 0.8 82 - 178 Flg 45922<br />
203995 MR2-030IS 3.0 20.0/4.0 n/a 1.0 100 - 178 Flg 45924<br />
203996 MR2-050IS 5.0 20.0/4.0 n/a 1.8 100 - 178 Flg 45925<br />
*10 metre power supply cable ( plug not included) with cable trolleys.<br />
188<br />
1300 722 999
Pacific Hoists Hitachi Electric Chain Hoists:<br />
Unit of Measure - Each<br />
Features<br />
• 3 phase models vary from 250kg to 15 tonne capacity and<br />
single phase from 250kg to 2 tonne. All models operate on<br />
24V AC low volt control<br />
• Safety Limits: full current and shunt limit switches operate<br />
in both directions of hook travel<br />
• Patented overload limiter<br />
• Braking: all models are fi tted with an electro-magnetic,<br />
self-adjusting disc type brake to the gearbox and the ‘F’<br />
models have an additional auxiliary centrifugal brake<br />
fitted to the motor<br />
• High quality Grade 80 zinc plated load chain supplied<br />
as standard<br />
• IP54 protection rating on all electric hoists and trolleys.<br />
Pendants IP65<br />
• Motor thermal protection on all Hitachi models<br />
• Optional radio remote control<br />
• Reverse phase protection relay on all models excluding;<br />
250kg, 500kg and all single phase models<br />
• Special low headroom hoist and trolley arrangements<br />
available to suit tight headroom applications<br />
• 415V electric trolleys are fitted with Guide Rollers as<br />
standard to reduce wear and ensure suitability for curved<br />
beam applications<br />
Specifications<br />
• All Hitachi models are manufactured to comply with<br />
AS1418.2<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Lift (m)<br />
Hoisting<br />
Speed (m/<br />
min.)<br />
Power (kW)<br />
Voltage<br />
Type<br />
Pacific Hoists<br />
Part No.<br />
201551 0.25 3.0 5.0 0.25 240 Single phase/Single speed HEH900<br />
201552 0.5 3.0 3.6 0.32 240 Single phase/Single speed HEH907<br />
201553 1.0 3.0 2.3 0.40 240 Single phase/Single speed HEH911<br />
201554 2.0 3.0 1.1 0.40 240 Single phase/Single speed HEH920<br />
201555 0.5 6.0 3.6 0.32 240 Single phase/Single speed HEH905<br />
201556 1.0 6.0 2.3 0.40 240 Single phase/Single speed HEH909<br />
201289 2.0 6.0 1.1 0.40 240 Single phase/ Single speed HEH916<br />
201557 0.25 6.0 5.0 0.25 240 Single phase/ Single speed HEH925<br />
201558 0.25 3.0 10.0 0.45 415 3 - phase/Single speed HEH010<br />
201559 0.5 3.0 7.2 0.63 415 3 - phase/Single speed HEH050<br />
201285 1.0 3.0 4.6 0.80 415 3 - phase/Single speed HEH100<br />
201560 1.0 3.0 7.1 1.30 415 3 - phase/Single speed HEH110<br />
201561 2.0 3.0 2.3 0.80 415 3 - phase/Single speed HEH200<br />
201562 2.0 3.0 6.8 2.40 415 3 - phase/Single speed HEH210<br />
201563 3.0 3.0 4.1 2.40 415 3 - phase/Single speed HEH300<br />
201564 5.0 3.0 2.8 2.40 415 3 - phase/Single speed HEH500<br />
201565 0.25 6.0 10.0 0.45 415 3 - phase/Single speed HEH015<br />
201566 0.5 6.0 7.2 0.63 415 3 - phase/Single speed HEH055<br />
201567 1.0 6.0 4.6 0.80 415 3 - phase/Single speed HEH105<br />
201568 1.0 6.0 7.1 1.30 415 3 - phase/Single speed HEH115<br />
201569 2.0 6.0 2.3 0.80 415 3 - phase/Single speed HEH205<br />
201570 2.0 6.0 6.8 2.40 415 3 - phase/Single speed HEH215<br />
201571 3.0 6.0 4.1 2.40 415 3 - phase/Single speed HEH305<br />
201572 5.0 6.0 2.8 2.40 415 3 - phase/Single speed HEH505<br />
201573 0.25 3.0 7.2/1.8 0.32 415 3 - phase/Two speed HEH020<br />
201574 0.5 3.0 7.2/1.8 0.63 415 3 - phase/Two speed HEH060<br />
201575 1.0 3.0 4.6/1.2 0.80 415 3 - phase/Two speed HEH120<br />
201576 2.0 3.0 6.8/1.7 2.40 415 3 - phase/Two speed HEH220<br />
201577 2.0 3.0 2.3/0.6 0.80/0.20 415 3 - phase/Two speed HEH230<br />
201578 3.0 3.0 4.0/1.0 2.40/0.60 415 3 - phase/Two speed HEH330<br />
201579 5.0 3.0 2.8/0.7 2.4/0.60 415 3 - phase/Two speed HEH530<br />
201580 0.25 6.0 7.2/1.8 0.32/0.08 415 3 - phase/Two speed HEH025<br />
201581 0.5 6.0 7.2/1.8 0.63/0.16 415 3 - phase/Two speed HEH065<br />
201582 1.0 6.0 4.6/1.2 0.80 415 3 - phase/Two speed HEH125<br />
201583 2.0 6.0 2.3/0.6 0.80 415 3 - phase/Two speed HEH225<br />
201584 2.0 6.0 6.8/1.7 2.40 240 3 - phase/Two speed HEH235<br />
201585 3.0 6.0 4.0/1.0 2.40/0.60 415 3 - phase/Two speed HEH335<br />
201586 5.0 6.0 2.8/0.7 2.40/0.60 415 3 - phase/Two speed HEH535<br />
3 - phase units with up to 15 tonne lifting capacity available. Other heights of lift available.<br />
WWW.BULLIVANTS.COM 189<br />
08 - <strong>MATERIALS</strong> HANDLING
Pacific Hoists Electric Chain Hoists: Unit of Measure - Each<br />
Pacific Hoists Porta Hoists: Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Features<br />
• IP65 Rated pendant with 24V control for operator safety<br />
• IP54 Protection rating<br />
• Overload protection<br />
• Upper and lower electrical limit switches<br />
• Motor thermal protection<br />
• Durable Grade 80 zinc plated load chain supplied as<br />
standard<br />
Specifications<br />
• Complies to AS1418.2<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Lift (m)<br />
Hoisting Speed<br />
(m/min.)<br />
Power (kW)<br />
Mass (kg)<br />
Pacific Hoists<br />
Part No.<br />
204079 0.25 3.0 12/3 0.6 30 PEH025<br />
204080 0.50 3.0 10/2.5 1.1 42 PEH050<br />
204081 1.00 3.0 8/2 1.5 57 PEH100<br />
204082 2.00 3.0 4/1 1.5 62 PEH200<br />
Features<br />
• Lifts small engines, tools, boxes or anything up to 500kg,<br />
suited for various workplaces<br />
• Perfectly portable with detachable pendant and chain<br />
bucket complete with unique compact carrying case<br />
• Adjustable speeds when accurate control is required<br />
• Easy to operate low voltage control with E - stop<br />
• Features mechanical brake and overload clutch with<br />
easy adjustability<br />
• Hoist - lower limit switch<br />
• 240V Single phase operation<br />
Specifications<br />
• Complies to AS1418.2<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Chain Size (mm)<br />
Hoisting Speed<br />
(m/min.)<br />
Mass (kg)<br />
201610 0.08 4.0 4.8 - 18.0 17.5<br />
201611 0.125 4.0 3.2 - 12.5 17.5<br />
Type<br />
Single<br />
phase<br />
Single<br />
phase<br />
Pacific Hoists<br />
Part No.<br />
PPH080<br />
PPH125<br />
201612 0.25 4.0 3.2 - 12.5 17.5<br />
201613 0.50 4.0 1.6 - 6.3 20.6<br />
Other heights of lift available.<br />
Single<br />
phase<br />
Single<br />
phase<br />
PPH240<br />
PPH500<br />
190<br />
1300 722 999
Pacific Hoists Electric Wire Rope Hoist:<br />
Unit of Measure - Each<br />
Pacific Hoists Electric Girder Trolleys:<br />
Unit of Measure - Each<br />
Features<br />
• Automatic upper limit switch; when rope disc touches<br />
the limit arm, hoisting is automatically stopped<br />
• Dynamic and mechanical brake providing instant and<br />
safe braking<br />
• Convenient 240V single phase power supply<br />
• Sensor arm automatically activates lower limit switch to<br />
stop motor if rope is underwound<br />
• Supplied with 3m power lead and industry plug, 10m<br />
heavy duty IP65 waterproof pendant control and wire<br />
rope with 360° weighted hook with safety latch<br />
Applications<br />
• Suitable for warehouses, construction sites and factories<br />
Specifications<br />
• CE Compliance<br />
Features<br />
• Provided with 24V AC contractors, motors<br />
415V AC 3-phase IP54<br />
• Optional single or dual speed, motor thermal<br />
protection included<br />
• Customised wider beam widths available on request<br />
ORDER CODE<br />
Capacity (kg)<br />
Speed (m/<br />
min.)<br />
Beam Range<br />
(mm)<br />
Pacific Hoists<br />
Part No.<br />
204083 500 10 75 - 125 PET050<br />
204084 1000 10 75 - 125 PET100<br />
204085 2000 10 100 - 150 PET200<br />
204086 500 20⁄5 75 - 125 PET055<br />
204087 1000 20⁄5 75 - 125 PET105<br />
204088 2000 20⁄5 100 - 150 PET205<br />
Pacific Hoists Hitachi Electric Girder Trolleys:<br />
Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Lift (m)<br />
Hoisting Speed<br />
(m/min.)<br />
Power (kW)<br />
Voltage<br />
Pacific Hoists<br />
Part No.<br />
201506 0.08 35 30 0.80 240 CWS080<br />
201507 0.16 40 22 1.20 240 CWS160<br />
201313 0.23 24 14 1.30 240 CWS230<br />
201537 0.30 24 13 1.50 240 CWS300<br />
Optional mounting arm CRH - 0710 available on request<br />
(not available for CWS - 300).<br />
Optional push trolley mount CRH - 0720 available on<br />
request (not available for CWS - 300).<br />
Features<br />
• Provided with 24V AC contactors, including transformer<br />
• Motors 415V AC 3-phase IP54<br />
• Optional single or dual speed<br />
• Customised wider beam widths available on request<br />
ORDER CODE<br />
Capacity (kg)<br />
Speed (m/<br />
min.)<br />
Beam Range<br />
(mm)<br />
Headroom<br />
(mm)<br />
Pacific Hoists<br />
Part No.<br />
204089 1000 10.5 74 - 125 126 HET100<br />
204090 2000 10.5 100 - 150 130 HET200<br />
204091 3000 10.5 100 - 150 140 HET300<br />
204092 5000 10.5 125 - 175 177 HET500<br />
WWW.BULLIVANTS.COM 191
Minifor ® : Unit of Measure - Each<br />
A complete range of electric hoists for a wide range of applications, portable and<br />
powerful for unlimited heights of lift.<br />
• WLL 100 kg to 950 kg<br />
• Unlimited height of lift<br />
• Unloaded wire rope freely suspended or optional rope reeler<br />
• Pendant control or radio operation<br />
• Direct lift or sheaving kit for increased capacity<br />
• Single phase or 3 phase motor<br />
Quality and Powerful<br />
• High power to weight ratio<br />
• Body in aluminium alloy<br />
• Unlimited length of lifting wire rope<br />
Safety<br />
• Upper and lower adjustable end limit stops<br />
• Motor integrated brake<br />
• HP5 wire rope, dia. 6.5 mm<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Air Hoists<br />
PWB Endo EHL Series Chain Air Hoist: Unit of Measure - Each<br />
Suitable for use in hazardous environments, PWB Anchor EHL Air Hoists from<br />
Endo Kogyo are fi tted with rotary vane motors in strong lightweight aluminum<br />
bodies, for easy handling in a variety of industrial and construction applications.<br />
Available in high and low speed models, in either cord or pendant controls with<br />
optional lift heights.<br />
Complies to AS1418.2.<br />
ORDER CODE<br />
Capacity<br />
Lift Speed<br />
(m/min)<br />
Lift (m)<br />
Headroom<br />
(mm)<br />
Control Type<br />
Model<br />
PWB Part No.<br />
201465 125kg 12.0 3 790 Pendant AT - 125K 44519<br />
201466 500kg 10.5 3 365 Pendant EHL05TSP 49251<br />
Pendant Control<br />
201261 1 tonne 5.2 3 440 Pendant EHL1TWP 49253<br />
122707 1 tonne 6.0 3 480 Pendant EHL1TSP 63538<br />
122106 2 tonne 3.0 3 540 Pendant EHL2TWP 48238<br />
201468 3 tonne 3.0 3 585 Pendant EHL3TSP 44181<br />
Cord Control<br />
122708 6 tonne 1.5 3 770 Pendant EHL6TWP 47609<br />
201255 500kg 10.5 3 365 Cord EHL05TSC 49250<br />
122108 1 tonne 5.2 6 440 Cord EHL1TWC 64591<br />
201260 1 tonne 5.2 3 440 Cord EHL1TWC 49252<br />
201497 1 tonne 6.0 3 480 Cord EHL1TSC 48237<br />
122105 2 tonne 3.0 3 540 Cord EHL2TWC 48239<br />
122109 2 tonne 3.0 6 540 Cord EHL2TWC 65728<br />
201467 3 tonne 3.0 3 585 Cord EHL3TSC 44998<br />
201269 6 tonne 1.5 3 770 Cord EHL6TWC 45000<br />
122107 6 tonne 1.5 6 770 Cord EHL6TWC 61692<br />
Maximum recommended pendant length of 8 metres.<br />
192<br />
1300 722 999
PWB Endo MTW Series Air Trolley: Unit of Measure - Each<br />
Suitable for General use and most hazardous environments.<br />
Used in conjunction with the EHL Air Hoist. The compact MTW Air Trolley is<br />
designed for easy handling and high speed performance. Available in Pendant<br />
control with 2 directional functions. Complies to AS1418.2.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Travel Speed<br />
(m/min)<br />
Beam Range<br />
(mm)<br />
Min beam<br />
raduis (mm)<br />
Control Type<br />
Weight (kg)<br />
Model<br />
204041 1.0 28.0 75 -125 Flg 3500 Pendant 35.0 MTH-1T<br />
204042 2.0 18.0 125 - 150 Flg 1000 Pendant 63.0 MTH-2T<br />
204043 6.3 19.0 150 - 190 Flg 2500 Pendant 127.0 MTH-6.3T<br />
PWB Endo EHW Series Wire Rope Air Hoists: Unit of Measure - Each<br />
Designed with a Wire Rope lift, the Endo EHW Air Hoist is available in hook or<br />
pendant control with a cone brake system. Suitable for General use and most<br />
hazardous environments. Complies to AS1418.2.<br />
ORDER CODE<br />
Capacity (kg)<br />
Standard Lift (m)<br />
Lift Speed (m/min)<br />
Headroom Hook<br />
Suspended min<br />
(mm)<br />
201503 120 2.0 16.0 680 On hook 9.5 EHW-120<br />
201253 120 2.0 16.0 630 Pendant 9.7 EHW-120R<br />
201505 250 2.0 11.0 745 Pendant 18.2 EHW-250R<br />
Control Type<br />
Weight (kg)<br />
Model<br />
Model EWH - 120<br />
Model EWH - 120R<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
NOTE: For optimum performance, installation of a filter and lubricator is<br />
recommended.<br />
WWW.BULLIVANTS.COM 193
Pacific Hoists Air Operated Chain Hoists - Flameproof -<br />
JDN Mini: Unit of Measure - Each<br />
Pacific Hoists Air Operated Chain Hoists - Flameproof -<br />
JDN: Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Features<br />
• Designed with patented motor - brake system and<br />
robust aluminium housing<br />
• Consists of only a few components resulting in low<br />
and easy maintenance<br />
• Easy to handle and move due to its small headroom<br />
and lightweight design<br />
• Comes complete with variable speed pendant, chain<br />
bucket, emergency stop and optional limit switch<br />
• Easily fits to Pacific Hoists push and geared trolleys<br />
and girder clamps<br />
• 100% Duty cycle<br />
• Manufactured in Germany, under strict quality control<br />
with demanding tolerances<br />
Applications<br />
• Suitable for lifting, mining, chemical, oil and gas,<br />
construction, shipbuilding, offshore and pharmaceutical<br />
Specifications<br />
• Complies to AS1418.2<br />
• CE Compliance<br />
• ATEX Certification<br />
ORDER CODE<br />
194<br />
Capacity (kg)<br />
Lift (m)<br />
Speed (m/<br />
min.)<br />
Control<br />
Headroom<br />
(mm)<br />
Pacific Hoists<br />
Part No.<br />
204093 125 3.0 15 Pendant 328 JDN123<br />
204094 250 3.0 8 Pendant 328 JDN253<br />
204095 500 3.0 10 Pendant 458 JDN503<br />
204096 980 3.0 5 Pendant 458 JDN603<br />
Other heights of lift available.<br />
Optional travel case available for 125kg and 250kg models.<br />
Features<br />
• Tough compact construction<br />
• Immune from dust, mud, heat and vapours<br />
• 100% Duty cycle<br />
• Manufactured in Germany, under strict quality<br />
control with demanding tolerances<br />
• Only six atmospheres of compressed air required,<br />
excluding models 1.5Ti and 3Ti/2 which can operate<br />
between 4.5 - 6 atmospheres of compressed air<br />
• Cord control, F control or brass pendant control available,<br />
as well as an electro pneumatic interface for Radio Remote<br />
control as an option<br />
• Optional chain buckets<br />
• Subsea version available<br />
Applications<br />
• Suitable for lifting, mining, chemical, oil and gas,<br />
construction, shipbuilding, offshore and pharmaceutical<br />
Specifications<br />
• Complies to AS1418.2<br />
• CE Compliance<br />
• ATEX Certifi cation<br />
ORDER CODE<br />
Capacity (kg)<br />
Lift (m)<br />
Speed (m/<br />
min.)<br />
Control<br />
Headroom<br />
(mm)<br />
Pacific Hoists<br />
Part No.<br />
204231 250 3 20 Cord 450 JDN705<br />
201470 500 3 11.0 Cord 450 JDN706<br />
201471 1000 3 5.5 Cord 450 JDN715<br />
201472 2000 3 2.7 Cord 498 JDN725<br />
201473 3200 3 5.0 Cord 593 JDN735<br />
201474 6300 3 2.5 Cord 674 JDN765<br />
201587 1600 3 4 - 6 Cord 480 JDN719<br />
201588 3200 3 2 - 3 Cord 544 JDN732<br />
204232 16000 3 1.0 Cord 898 JDN785<br />
201475 10000 3 1.6 Cord 815 JDN775<br />
201476 20000 3 0.7 Cord 1030 JDN795<br />
Pendant control available on request.<br />
Range of specialised mining hoists also available<br />
and larger capacities up to 100 tonne.<br />
Other heights of lift available.<br />
1300 722 999
Pacific Hoists JDN Mining Hoist: Unit of Measure - Each<br />
JDN ‘M’ series air hoists have been specially developed for underground<br />
operations where loads must not only be lifted and lowered but also pulled<br />
horizontally. Due to their multiple applications they are also deployed in most<br />
industrial fi elds, have the same features as the PROFi Hoists but operate<br />
with only 4 bar of air pressure.<br />
• Manufactured in Germany under strict quality control<br />
with demanding tolerances<br />
• Low maintenance design delivers 100% duty cycle in<br />
all environmental conditions<br />
• Insensitive to dust, humidity and temperatures ranging<br />
from -20°C up to approx. + 70°C.<br />
• Cast iron housing suitable for severe conditions.<br />
• ATEX Approved models for use in dangerous and<br />
explosive environments.<br />
• Fail safe brake in case of air supply failure.<br />
• Oil free operation allows use in clean areas.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Lift Speed (m/<br />
min)<br />
201477 1-2 3-1.5 3 60 JDN991<br />
201478 3-6 2.2-1.1 3 100 JDN990<br />
Lift (m)<br />
Weight (kg)<br />
Model<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
WWW.BULLIVANTS.COM 195
Electric Winches<br />
PWB Anchor SA Series (12V) DC Electric Winch: Unit of Measure - Each<br />
Available in 4 models featuring power-in, power-out, controlled freewheeling<br />
clutch and automatic brake.<br />
SA Series models are equipped with flexible high strength aircraft cable and<br />
the emergency crank handle is supplied as standard equipment.<br />
Remote Control kits are also available.<br />
ORDER CODE<br />
Model<br />
Volts/Amps<br />
Load Capacity<br />
(kg)<br />
Gear Ratio<br />
Cable Fitted<br />
PWB Part No.<br />
201616 SA5000DC 12V DC / 70A 681 189:1 5mm x 6m 45077<br />
201617 SA7000DC 12V DC / 70A 999 189:1 5mm x 15m 45078<br />
201618 SA9000DC 12V DC / 70A 1362 570:1 5.5mm x 7.5m 45079<br />
201619 SA12000DC 12V DC / 70A 2043 570:1 5.5mm x 15m 45076<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
PWB Anchor TW Series (12V) DC Electric Winch: Unit of Measure - Each<br />
Available in 2 models featuring power-in and controlled freewheel operation,<br />
mechanical brake and clutch control knob.<br />
TW Series models are equipped with a 6m x 50mm polyester strap and hook.<br />
Emergency crank handle supplied as standard with TW9000 Model.<br />
ORDER CODE<br />
Model<br />
Volts/Amps<br />
Load Capacity<br />
(kg)<br />
201620 TW4000DC 12V DC / 40A 681 324:1 6m x 50mm 43579<br />
201621 TW9000DC 12V DC / 70A 1362 570:1 6m x 50mm 43580<br />
Gear Ratio<br />
Strap Fitted<br />
PWB Part No.<br />
196<br />
1300 722 999
Pacific Hoists Electric Winches: Unit of Measure - Each<br />
Features<br />
• Electric lifting or hauling<br />
• Precision engineered, rugged construction<br />
• Available in single and 3 - phase models<br />
• Brakes designed for both static and dynamic loading, applying<br />
automatically in the event of power loss<br />
• Compact load - sharing design of the heat treated planetary gear<br />
ensures quiet operation and long life<br />
• Lightweight and compact<br />
• 24V AC low volt control available in all CP and CWG models<br />
Applications<br />
• Suitable for portable use<br />
CWL Range<br />
ORDER CODE<br />
Capacity (kg)<br />
Speed (m/<br />
min.)<br />
Voltage<br />
Wire Rope<br />
Size (mm x m)<br />
Mass (kg)<br />
Model Type<br />
Pacific Hoists<br />
Part No.<br />
CP Range<br />
203903 200 11 - 16 240 5 x 46 30 CWL CWL200<br />
203904 200 11 - 16 240 5 x 71 33 CWL CWL205<br />
204233 300 16 - 25 240 6 x 60 40 CWL CWL305<br />
203864 200 10 - 15 240 6 x 30 32 CP ACW200<br />
203862 250 10 - 15 240 6 x 30 34 CP ACW250<br />
204234 300 10 - 15 240 6 x 30 38 CP ACW300<br />
204235 500 10 - 15 240 7 x 60 55 CP ACW305<br />
204236 750 10 - 15 415 9 x 60 135 CP ACW310<br />
201314 300 12 - 19 240 6 x 60 42 CWG ACW320<br />
201608 300 10 - 15 415 6 x 30 32 CWG ACW345<br />
201315 400 12 - 18 240 9 x 60 120 CWG ACW330<br />
203865 500 12 - 18 415 9 x 60 120 CWG ACW350<br />
201316 900 13 - 20.6 415 10 x 60 185 CWG ACW375<br />
201609 1100 14 - 25 415 12 x 100 250 CWG ACW565<br />
201319 1500/2500 4.0/2.5 240 7 x 12 60 CAP CAP250<br />
CWG Range<br />
CAP Range<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
203806 2200 6.9 - 12.6 415 16 x 100 400 CWG ACW750<br />
WWW.BULLIVANTS.COM 197
Pacific Hoists Electric Winches - 12 & 24 Volt:<br />
Unit of Measure - Each<br />
Pacific Hoists DV Recovery 4WD Winches:<br />
Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Features<br />
• Compact, powerful and robust<br />
• 12V and 24V Reversible permanent magnetic motor<br />
allowing low amp draw and low level sound<br />
• Ratchet braking to securely hold the load<br />
• Hand - held pendant with 4m cord supplied<br />
Applications<br />
• Suitable for small trucks and utilities to eliminate the need<br />
for manual lifting, truck mounted jib cranes, raising tailgates<br />
on trailers and horse floats<br />
Specifications<br />
• CE Compliance<br />
ORDER CODE<br />
Capacity (kg)<br />
Motor<br />
Speed - No<br />
Load (m/min.)<br />
Wire Rope<br />
(mm x m)<br />
Mass (kg)<br />
Pacific Hoists<br />
Part No.<br />
204237 120 24V/100W 5 4.0 x 5 17 PDH125<br />
201374 120 12V/100W 5 4.0 x 5 17 PDH120<br />
201310 300 12V/300W 5 4.8 x 12 27 PDH300<br />
201375 300 24V/300W 5 4.8 x 12 27 PDH305<br />
203841 500 12V/500W 4 6.2 x 12 27 PDH500<br />
203842 500 24V/500W 4 6.2 x 12 27 PDH505<br />
Features<br />
• Power In/Out with free - spooling clutch<br />
• Inbuilt four - way roller fairlead<br />
• Hand - held remote with 3m cable<br />
• Battery cable with circuit breaker for over - current<br />
protection and integrated solenoid pack for complete<br />
protection of wirings<br />
Applications<br />
• Suitable for launching boats, emergency vehicles, self -<br />
recovery and general farm use, 4 - wheel driving<br />
• NOT recommended for lifting applications<br />
Specifications<br />
• CE Compliance<br />
ORDER CODE<br />
Line Pull (kg)<br />
Speed - No.<br />
Load (m/Min.)<br />
Wire Rope<br />
(mm x m)<br />
Mass (kg)<br />
Pacific Hoists<br />
Part No.<br />
201376 1134 5.0 4.8 x 15.2 13.5 DV2500<br />
201377 1588 6.5 5.5 x 15.2 13.9 DV3500<br />
201317 2041 6.5 6.3 x 15.2 14.2 DV4500I<br />
201378 4082 13.4 8.3 x 30.5 36.0 DV9<br />
Specifications are for 12V units (24V also available).<br />
Larger sizes available on request.<br />
Pacific Hoists Hydraulic Recovery Winches:<br />
Unit of Measure - Each<br />
Features<br />
• Robust and compact<br />
• Designed for long life under extreme operating conditions<br />
• Two - stage planetary gear for fast line speed<br />
• Automatic load - holding brake and sliding ring<br />
gear clutch for free spooling<br />
• Larger sizes available on request<br />
Applications<br />
• Suitable for heavy duty applications on 4WD, tractors,<br />
lorry and fire/rescue<br />
Specifications<br />
• CE Compliance<br />
ORDER CODE<br />
Line Pull (kg)<br />
Speed (m/<br />
Min.)<br />
Gear Ratio<br />
Rope Size<br />
(mm x m)<br />
Mass (kg)<br />
Pacific Hoists<br />
Part No.<br />
204075 3630 15 16.0:1 11.1 x 27 43.3 PHV090<br />
204076 4535 14 16.0:1 12 x 34 46.6 PHV100<br />
204077 5440 10 19.4:1 14 x 27 87 PHV120<br />
204078 6800 9 19.4:1 16 x 24 80 PHV150<br />
198<br />
1300 722 999
Hand Winches<br />
PWB Dutton Lainson Winches<br />
PWB Anchor range of hand operated Winches manufactured by the Dutton-<br />
Lainson Company are best suited for recreational and marine trailers, along<br />
with horizontal pulling or lifting applications.<br />
All Dutton-Lainson Winches have been permanently lubricated drive shaft<br />
bearings and all welded and brazed construction for greater strength.<br />
Offered in a selection of plain ratchet and brake type models featuring laminated,<br />
hardened drive gears for longer life, heavy duty steel handles with ergonomic<br />
hand grips and rigid welded reels that accept either wire rope cable or webbing<br />
straps.<br />
Available in the zinc plated TUFFPLATE fi nish, with permanently lubricated drive<br />
shaft bearings.<br />
Dutton-Lainsons TUFFPLATE fi nish has 3 times the corrosion resistance of<br />
standard zinc plated trivalent chrome process and 30% greater corrosion<br />
resistance when compared to a powder coated fi nish.<br />
The TUFFPLATE finish is standard on Dutton-Lainson Hand Winches and<br />
provides excess of 500 hours against fi rst red rust and in excess of 100<br />
hours for fi rst white rust.<br />
PWB DL Series Hand Winches: Unit of Measure - Each<br />
This DL Series of Hand Winches are ideally suited to boat trailers and other<br />
pulling applications that require the free-wheeling feature of ratchet type winches.<br />
Winches supplied in the TUFFPLATE fi nish, with permanently lubricated drive<br />
shaft bearings.<br />
ORDER CODE<br />
Rated Capacity<br />
(kg)<br />
Drum Hub Dia.<br />
(mm)<br />
Gear Ratio<br />
Handle Length<br />
(mm)<br />
Reversible<br />
Ratchet<br />
Model<br />
Drum Capacity (max.)<br />
Cable<br />
Strap<br />
201495 272 16 3.2:1 178 No DL600A 4mm x 18.5m 5m x 50mm<br />
201498 408 16 3.2:1 178 No DL900A 5mm x 12m 5m x 50mm<br />
201614 499 22 3.7:1 178 No DL1100A 5mm x 24m 9m x 50mm<br />
201499 590 22 4.4:1 178 No DL1300A 5.5m x 18m 9m x 50mm<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
201615 635 22 4.4:1 242 Yes DL1402A 6mm x 40m 9m x 50mm<br />
201371 817 28.5 5.4:1 242 Yes DL1800A 7mm x 18m 11.5m x 50mm<br />
201341 1134 28.5 17.3:1/5.4:1 242 Yes DL2500A 8mm x 15m 11.5m x 50mm<br />
201501 1134 28.5 17.3:1/5.4:1 242 Yes DL2500AB 8mm x 15m 11.5m x 50mm<br />
PWB DLB Series Load-Brake Winches: Unit of Measure - Each<br />
The Dutton-Lainson DLB Series Load-Brake Winches feature an automatic<br />
self-locking friction plate brake, which supplies a constant, positive holding<br />
action for additional safety and control and can be mounted in either the<br />
vertical or horizontal position.<br />
DLB Series winches require a minimum operating load and are supplied in<br />
copper bronze powder coat fi nish.<br />
ORDER CODE<br />
Rated Capacity<br />
(kg)<br />
Drum Hub Dia.<br />
(mm)<br />
Gear Ratio<br />
Handle Length<br />
(mm)<br />
Model<br />
Drum Capacity (max.)<br />
Cable<br />
Strap<br />
201324 363 48 4.4:1 178 DLB800A 5mm x 21m 8m x 50mm<br />
201496 545 64 5.4:1 178 DLB1200A 5.5mm x 21m 9m x 50mm<br />
201334 681 64 5.4:1 238 DLB1500A 6mm x 18m 9m x 50mm<br />
*Fitted with Hand-Brake<br />
NOTE: Wire Cable or Web Straps NOT Included on Winches.<br />
WWW.BULLIVANTS.COM 199
PWB B Series Brake Winches: Unit of Measure - Each<br />
The B Series Brake Winches have all the features of the DLB Series with the<br />
additional features including extra heavy duty construction. Drive shaft needle<br />
bearings are fi tted with a gear cover to enclose the brake mechanism.<br />
B Series winches require a minimum operating load and are supplied in copper<br />
bronze powder coat finish.<br />
ORDER CODE<br />
Rated Capacity<br />
(kg)<br />
Drum Hub Dia.<br />
(mm)<br />
Gear Ratio<br />
Handle Length<br />
(mm)<br />
Min. Load (kg)<br />
Model<br />
Drum<br />
Capacity (<br />
max.)<br />
Cable<br />
201333 681 28.5 6:1 311 68 B1500 6mmx16m<br />
201340 1135 34 12:1 311 136 B2500 8mmx15.5m<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
PWB Industrial Load Brake Winch: Unit of Measure - Each<br />
PWB Anchor Industrial Loadbrake Winches are designed for use in either the<br />
vertical or horizontal position and can be wall or fl oor mounted. Fitted with an<br />
automatic (Weston) style brake that automatically suspends or holds the load,<br />
when the handle winding ceases.<br />
Available in 500kg and 1 tonne capacities, for heavy industrial pulling and<br />
hauling applications with a generous size, heavy duty drum for wire rope reeling.<br />
ORDER CODE<br />
Capacity)<br />
Drum Hub Dia.<br />
(mm)<br />
Handle Turns to<br />
Move 1m<br />
Handle Length<br />
(mm)<br />
Effort on Handle<br />
For Rated Load<br />
Drum Capacity<br />
(max.)<br />
Cable<br />
201327 500kg 102 21.5 305 16 kg 8mm x 27.5m<br />
201502 1 tonne 140 53 235 16 kg 13mm x 40m<br />
NOTE: Wire Cable or Web Straps NOT included on Winches<br />
Pacific Hoists Load Brake Winches: Unit of Measure - Each<br />
Features<br />
• Compact, lightweight and rugged construction<br />
• Automatic brake - enabling the load to be held in any position<br />
• All enclosed mechanical components with strong steel cover for<br />
better protection<br />
• Safety ratchet gear to prevent slipping and electroplated gears<br />
for extra corrosion protection<br />
• BHW - 1800 and BHW - 2600 include double brake pawl for added safety<br />
• BHW - 125N (BHW - 1200N) available in chrome and noiseless<br />
Applications<br />
• Suitable for pulling or lifting loads across various industries<br />
Specifications<br />
• Complies to AS1418.2:1997 when fi tted with approved wire rope and fi ttings<br />
ORDER CODE<br />
Lifting Capacity<br />
(kg)<br />
Pulling Capacity<br />
(kg)<br />
Hub Dia. (mm)<br />
Capacity - Wire<br />
Rope (mm x m)<br />
Gear Ratio<br />
Hand Force Req.<br />
(kg)<br />
Mass (kg)<br />
Pacific Hoists<br />
Part No.<br />
201325 180 370 40 4 x 36 4.1:1 14.5 3.0 BHW - 080<br />
201303 270 545 50 5 x 23 4.1:1 15 3.3 BHW - 120<br />
201372 270 545 50 5 x 23 4.1:1 15 3.3 BHW - 125N<br />
201337 410 820 70 7 x 24 5.0:1 22 8.0 BHW - 1800<br />
201331 600 1200 80 8 x 18 10.0:1 19 10.3 BHW - 2600<br />
201600 850 1700 60 8 x 35 22.2:1 16 13.5 PHW - 155<br />
Not supplied with rope.<br />
200<br />
1300 722 999
Pacific Hoists Load Brake Winches - Kylan Coated: Unit of Measure - Each<br />
Features<br />
• Marine - coated Kylan fi nish is a new and unique coating which protects<br />
against the damaging effects of weather, environment and chemical corrosion<br />
• Finish has been tested and approved against salt - spray corrosion for at<br />
least 1,000 hours and can be used in severe circumstances<br />
• Model BHW125K is the noiseless brake winch<br />
Applications<br />
• Suitable for marine and outdoor exposed applications<br />
Specifications<br />
• Complies with AS1418.2 when correctly fi tted with approved wire rope<br />
and fittings<br />
ORDER CODE<br />
Lifting Capacity<br />
(kg)<br />
Pulling Capacity<br />
(kg)<br />
Hub Dia. (mm)<br />
Capacity - Wire<br />
Rope (mm x m)<br />
Gear Ratio<br />
Hand Force Req.<br />
(kg)<br />
Mass (kg)<br />
Pacific Hoists<br />
Part No.<br />
201601 180 370 40 4 x 36 4.1:1 14.5 3.0 BHW080K<br />
201602 270 545 50 5 x 23 4.1:1 15.0 3.3 BHW120K<br />
201603 270 545 50 5 x 23 4.1:1 15.0 3.3 BHW125K*<br />
201604 410 820 70 7 x 24 5.0:1 22.0 8.0 BHW180K<br />
201605 600 1200 80 8 x 18 10.0:1 19.0 10.3 BHW260K<br />
Not fitted with rope.<br />
Pacific Hoists Load Brake Winches - Stainless Steel: Unit of Measure - Each<br />
Features<br />
• Cost - effective solution which can be used to pull or lift loads<br />
• Corrosion resistant Grade 304 Stainless Steel<br />
• Compact and lightweight<br />
• Automatic brake - enabling the load to be held in any position<br />
• All enclosed mechanical components for better protection<br />
• Safety ratchet gear to prevent slipping<br />
Applications<br />
• Suitable for marine, food, pharmaceutical and veterinary industries<br />
Specifications<br />
• Complies to AS1418.2:1997 when fi tted with approved wire rope and fittings<br />
ORDER CODE<br />
Lifting Capacity<br />
(kg)<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Pulling Capacity<br />
(kg)<br />
Hub Dia. mm<br />
Capacity - Wire<br />
Rope (mm x m)<br />
Gear Ratio<br />
Hand Force Req.<br />
(kg)<br />
Pacific Hoists<br />
Part No.<br />
204069 270 545 50 5 x 23 4.1:1 15 BHW123<br />
204070 410 820 70 7 x 24 5.0:1 22 BHW183<br />
204071 600 1200 80 8 x 18 10.0:1 19 BHW263<br />
Not supplied with rope.<br />
WWW.BULLIVANTS.COM 201
Pacific Hoists Hand Winches - Kylan Coated: Unit of Measure - Each<br />
Features<br />
• Kylan finish protects against the damaging effects of weather,<br />
environment and chemical corrosion<br />
• Finish is tested and approved against salt spray corrosion for<br />
at least 1,000 hours<br />
• Suitable for severe circumstances<br />
• Suitable for marine and outdoor exposed applications<br />
Specifications<br />
• Complies with AS1418.2 when correctly fi tted with approved<br />
wire rope and fittings<br />
ORDER CODE<br />
Lifting Capacity<br />
(kg)<br />
Pulling Capacity<br />
(kg)<br />
Hub Dia. (mm)<br />
Cable Diameter<br />
(mm)<br />
Gear Ratio<br />
Hand Force Req.<br />
(kg)<br />
Mass (kg)<br />
Pacific Hoists Part<br />
No.<br />
201606 - 280 19 4.0 3.1:1 2.26 2.26 PHW060K<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
201607 - 550 34 4.8 4.1:1 2.84 2.84 PHW120K<br />
Pacific Hoists Hand Winches - Powdercoated: Unit of Measure - Each<br />
Features<br />
• Compact, lightweight and rugged construction<br />
• Mechanical components enclosed for protection and safety<br />
• Rope to drum fixing clamp provided<br />
• Heat - treated gears<br />
• Strong removable handles<br />
• High precision construction Minimises gear noise<br />
“HW1500 is a worm drive version”<br />
Specifications<br />
• Complies with AS1418.2 when correctly fi tted with wire rope and fittings<br />
ORDER CODE<br />
Lifting Capacity<br />
(kg)<br />
Pulling Capacity<br />
(kg)<br />
Hub Dia. (mm)<br />
Cable Diameter<br />
(mm)<br />
Gear Ratio<br />
Hand Force Req.<br />
(kg)<br />
Mass (kg)<br />
Pacific Hoists Part<br />
No.<br />
201373 340 680 48 5.6 41.0:1 5.00 5.0 PHW150<br />
202<br />
1300 722 999
Lever Winches<br />
Tractel Tirfor 500 Series: Unit of Measure - Each<br />
• Compact, lightweight and easy to handle.<br />
• Recommended for applications where portability is an important criteria.<br />
• Tirfor units combine ease of handling and safety.<br />
• Units supplied without Wire Rope.<br />
ORDER CODE<br />
Capacity (kg)<br />
Weight<br />
Machine (kg)<br />
Weight Wire<br />
Rope (kg)<br />
Rope Dia.<br />
(mm)<br />
Dimensions<br />
(mm)<br />
Model<br />
201361 800 6.6 7 8.3 420 x 250 x 99 T-508D<br />
201305 1600 13.5 12.5 11.5 530 x 315 x 127 T-516D<br />
201306 3200 24 26 16.3 631 x 351 x 148 T-532D<br />
Tractel Tirfor 500 Series Complete With Wire Rope: Unit of Measure - Each<br />
ORDER CODE<br />
Capacity (kg)<br />
Weight<br />
Machine (kg)<br />
Weight Wire<br />
Rope (kg)<br />
Rope Dia.<br />
(mm)<br />
Dimensions<br />
(mm)<br />
201362 800 6.6 7 8.3 420 x 250 x 99 T-508<br />
201363 1600 13.5 12.5 11.5 530 x 315 x 127 T-516<br />
201365 3200 24 26 16.3 631 x 351 x 148 T-532<br />
Tractel Tirfor - Replacement Rope & Reeler Complete With Hook:<br />
Unit of Measure - Each<br />
To suit Tirfor 500 Series.<br />
ORDER CODE<br />
Rope Diameter<br />
(mm)<br />
Rope Length<br />
(metre)<br />
Model<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
122110 8 20<br />
201369 11 20<br />
201370 16 20<br />
Bullant Tugger Winch: Unit of Measure - Each<br />
The Bullant Winch may be used in any position to lift, pull, lower or stretch<br />
heavy loads. Able to be used at any angle, and unrestricted by rope length, this<br />
versatile winch enables the wire rope to be fed through 2 sets of wear resistant<br />
interlocking jaws by a single operating lever.<br />
ORDER CODE<br />
Lifting<br />
Capacity (kg)<br />
Pulling<br />
Capacity (kg)<br />
Rope Dia.<br />
(mm)<br />
Stroke (mm)<br />
Weight (kg)<br />
Case<br />
Model<br />
203935 800 1200 8 696 8 Aluminium BUA-800<br />
203936 800 1200 8 696 8 Steel BUS-800<br />
203937 1600 2400 11 706 12 Aluminium BUA-1200<br />
203938 1600 2400 11 706 12 Steel BUS1200<br />
203939 3200 4800 16 711 24 Aluminium BUA-3200<br />
203940 3200 4800 16 711 24 Steel BUS3200<br />
WWW.BULLIVANTS.COM 203
Spring Balancers<br />
PWB Anchor Spring Balancers<br />
The PWB Anchor range of Endo Spring Balancers are designed for the<br />
suspension of electric or pneumatic power tools, or for hanging tools, parts<br />
or welding equipment at workstations or assembly lines. Available in varying<br />
adjustable weight ranges<br />
PWB EW/EWF Series Spring Balancer: Unit of Measure - Each<br />
Coupled with the lightweight range of the EK Series, the EW/ EWF range of<br />
Spring Balancers is the popular choice for positioning of tools.<br />
ORDER CODE<br />
Capacity Min.<br />
(kg)<br />
Capacity Max.<br />
(kg)<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Stroke (m)<br />
Weight (kg)<br />
Model<br />
204127 0.3 0.6 1.5 0.4 ERP-06<br />
204128 0.5 1.5 0.5 0.2 EK-00<br />
204129 0.5 1.5 1.0 0.5 EK-0<br />
203946 1.0 3.0 1.3 1.4 EW-3<br />
203843 2.5 5.0 1.3 1.5 EW-5<br />
203844 4.5 9.0 1.3 3.5 EWF-9<br />
203334 9 15 1.3 3.8 EWF15<br />
203335 15 22 1.5 7 EWF22<br />
203336 22 30 1.5 7.6 EWF30<br />
203846 30 40 1.5 9.8 EWF40<br />
203847 40 50 1.5 10.2 EWF50<br />
203849 50 60 1.5 11.6 EWF60<br />
203850 60 70 1.5 11.9 EWF70<br />
PWB Endo Spring Balancers ELF Series: Unit of Measure - Each<br />
The Endo ELF Series is ideal for applications that require a longer stroke.<br />
ORDER CODE<br />
Balance Range<br />
Min. (kg)<br />
Balance Range<br />
Max. (kg)<br />
Stroke (metre)<br />
Weight (kg)<br />
Model<br />
203947 1.5 3.0 2.5 4.1 ELF-3<br />
203948 3.0 5.0 2.5 4.2 ELF-5<br />
203332 5.0 9.0 2.5 4.7 ELF-9<br />
203949 9.0 15.0 2.5 10.0 ELF-15<br />
203845 15.0 22.0 2.5 10.2 ELF-22<br />
203950 22.0 30.0 2.5 11.0 ELF-30<br />
203951 30.0 40.0 2.5 14.0 ELF-40<br />
203848 40.0 50.0 2.5 14.5 ELF-50<br />
203952 50.0 60.0 2.5 17.0 ELF-60<br />
203953 60.0 70.0 2.5 18.1 ELF-70<br />
PWB Air Tool Balancers: Unit of Measure - Each<br />
Specifi cally designed for the suspension of air tools, the ATB has the function of<br />
both hose reel and balancer.<br />
ORDER CODE<br />
Capacity Min.<br />
(kg)<br />
Capacity Max.<br />
(kg)<br />
Model<br />
Hose Travel<br />
(m)<br />
Weight (kg)<br />
PWB Part No.<br />
204168 0.5 1.5 ATB-0 1.3 1.6 43351<br />
204169 1.5 3.0 ATB-1 1.3 1.7 43352<br />
204<br />
1300 722 999
Pacific Hoists Kromer Spring Balancers: Unit of Measure - Each<br />
Features<br />
• Designed to support heavy hand - operated process tools<br />
enabling them to be operated with Minimal effort<br />
• Fully enclosed spring and solid casing<br />
• Stepless load balancing via worm gearing<br />
• Cable limiters prevent overload damage<br />
• Safety hook can be swivelled and adjusted laterally for<br />
alignment to work area<br />
• Larger capacities and stroke lengths available<br />
• CE Compliance<br />
ORDER CODE<br />
Capacity (kg)<br />
Stroke (m)<br />
Mass (kg)<br />
Model<br />
Pacific Hoists<br />
Part No.<br />
204110 0.5 - 1.5 1.6 0.5 7200 - 1 KRM001<br />
204111 0.5 - 2.0 2.5 0.8 7211 - 1 KRM111<br />
203330 0.5 - 2.0 2.5 0.9 7212 - 1 KRM121<br />
203238 1.5 - 3.0 2.5 0.8 7211 - 2 KRM112<br />
203239 2.0 - 5.0 3.0 3.3 7221 - 1 KRM211<br />
203240 7.0 - 10.0 3.0 3.7 7221 - 3 KRM213<br />
203241 10.0 - 14.0 3.0 3.9 7221 - 4 KRM214<br />
203242 10.0 - 14.0 3.0 4.0 7222 - 4 KRM224<br />
203243 9.0 - 14.0 2.0 3.6 7231 - 4 KRM314<br />
203851 9.0 - 14.0 2.0 3.4 7230 - 4 KRM304<br />
203244 13.0 - 17.0 2.0 3.6 7230 - 5 KRM305<br />
203690 16.0 - 21.0 2.0 3.8 7230 - 6 KRM306<br />
204112 13.0 - 17.0 2.0 3.8 7231 - 5 KRM315<br />
204113 16.0 - 21.0 2.0 4.0 7231 - 6 KRM316<br />
7212, 7222 and 7231 fitted with ratchet lock.<br />
Load Indicators<br />
Tractel ® Dynafor LLX1: Unit of Measure - Each<br />
Tractel ® Dynafor LLX2: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (tonnes)<br />
Precision +/-<br />
(kg)<br />
Increment<br />
(kg)<br />
Weight (kg)<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Model<br />
ORDER CODE<br />
WLL (tonnes)<br />
Precision +/-<br />
(kg)<br />
Min. Display<br />
(kg)<br />
Increment<br />
(kg)<br />
Max. Display<br />
(kg)<br />
Weight (kg)<br />
Model<br />
204242 0.5 1.0 0.2 1.1 LLX1<br />
204243 1.0 2.0 0.5 1.1 LLX1<br />
204244 2.0 4.0 1.0 1.3 LLX1<br />
204245 3.2 6.0 1.0 1.5 LLX1<br />
204246 5.0 10.0 2.0 2.3 LLX1<br />
204247 6.3 13.0 2.0 2.3 LLX1<br />
204248 12.5 25.0 5.0 4.3 LLX1<br />
203969 0.5 0.5 0.5 0.1 550 2.30 LLX2<br />
203970 1.0 1.0 1.0 0.2 1100 2.30 LLX2<br />
203971 2.0 2.0 2.5 0.5 2200 2.30 LLX2<br />
203972 3.2 3.2 2.5 0.5 3520 2.30 LLX2<br />
203973 5.0 5.0 5.0 1.0 5500 3.35 LLX2<br />
203974 6.3 6.3 5.0 1.0 6930 3.35 LLX2<br />
204241 10.0 10.0 10.0 2.0 11000 6.45 LLX2<br />
204249 20.0 40.0 10.0 7.0 LLX1<br />
WWW.BULLIVANTS.COM 205
Tractel ® Dynafor LLXh: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (tonnes)<br />
Precision +/-<br />
(kg)<br />
Min. Display<br />
(kg)<br />
Increment<br />
(kg)<br />
Max. Display<br />
(kg)<br />
Weight (kg)<br />
Model<br />
204238 15 30 25 5 16500 4 LLXh<br />
204239 25 50 50 10 27500 6.6 LLXh<br />
204059 50 100 100 20 55000 15.1 LLXh<br />
204060 100 200 250 50 110 46 LLXh<br />
204240 250 500 500 100 275 215 LLXh<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Tractel ® Dynafor LLZ: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (tonnes)<br />
Precision +/-<br />
(kg)<br />
Min. Display<br />
(kg)<br />
Increment<br />
(kg)<br />
Max. Display<br />
(kg)<br />
204250 0.25 2 0.5 0.5 275 1.1 LLZ<br />
204251 0.5 4 1 1 550 1.1 LLZ<br />
204252 1 8 2 2 1100 1.1 LLZ<br />
203719 2 15 5 5 2200 1.3 LLZ<br />
204253 3.2 25 5 5 3520 1.6 LLZ<br />
204254 6.4 50 10 10 7040 2.3 LLZ<br />
204255 10 80 20 20 11000 4 LLZ<br />
204256 20 150 50 50 22000 7 LLZ<br />
Weight (kg)<br />
Model<br />
Load Skates<br />
Pacific Hoists Load Skates: Unit of Measure - Each<br />
Features<br />
• Low profile movers designed to facilitate the moving, positioning or<br />
installation of heavy equipment, machinery and bridge structures<br />
• Hardened rollers for low friction and roll resistance<br />
• No axles, bearings, or other closely fitted, wear prone parts<br />
• Can be fitted with optional turntable and handle<br />
• Turntables are supplied complete with handle to suit<br />
Load Skates LSK005, LSK010, LSK020 & LSK030<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Width (mm)<br />
Length (mm)<br />
Height (mm)<br />
Mass (kg)<br />
Pacific Hoists<br />
Part No.<br />
204117 1.25 100 169 65 3.9 LSK005<br />
204118 2.5 100 188 65 4.5 LSK010<br />
203740 5 100 210 65 5 LSK020<br />
Turntables<br />
204119 7.5 65 210 65 5 LSK030<br />
204120 12.5 140 275 100 18 LSK050<br />
204121 18.75 145 290 100 18 LSK075<br />
206<br />
1300 722 999
Trolleys<br />
Scissorlifts: Unit of Measure - Each<br />
Flat Trolleys: Unit of Measure - Each<br />
• Single scissor lift models for high reach.<br />
• Overload valve ensures load limit is not exceeded.<br />
• Hydraulic lift ensures loads lower slowly.<br />
• Foot operated.<br />
ORDER CODE<br />
Lifting Capacity (kg)<br />
Max. Height of<br />
Platforms (mm)<br />
Dimensions (mm)<br />
Weight (kg)<br />
203886 150 220 - 720 700 x 420 x 36 46<br />
203887 300 285 - 880 815 x 500 x 50 82<br />
203889 500 285 - 880 815 x 500 x 50 87<br />
Double Scissorlifts: Unit of Measure - Each<br />
Flat Trolleys are a quality product at a budge price, packed<br />
with features and easy to use. This makes them the answer<br />
when moving items effi ciently while helping to eliminate<br />
workplace injuries.<br />
ORDER CODE<br />
Capacity (kg)<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
• Double scissor lift models for high reach.<br />
• Overload valve ensures load limit is not exceeded.<br />
• Hydraulic lift ensures loads lower slowly.<br />
• Foot operated.<br />
ORDER CODE<br />
Lifting Capacity (kg)<br />
Max. Height of<br />
Platforms (mm)<br />
Dimensions (mm)<br />
Weight (kg)<br />
Tiers<br />
Platform Size (mm)<br />
203829 150 1 762 x 483 Enamelled Steel 1 4 12.5<br />
203831 150 2 762 x 483 Enamelled Steel 2 4 20<br />
203832 300 2 940 x 635 Enamelled Steel 2 4 34<br />
203833 300 3 940 x 635 Enamelled Steel 2 4 45<br />
Material<br />
Handle<br />
No. of Wheels<br />
Weight (kg)<br />
203888 350 1300 1000 x 515 x 420 115<br />
203890 800 1300 940 x 500 x 340 120<br />
WWW.BULLIVANTS.COM 207
Pacific Hoists Lifter Trolleys: Unit of Measure - Each<br />
Pallet Trucks<br />
Hand Pallet Truck: Unit of Measure - Each<br />
High steel construction with powder coated finish and sealed<br />
hydraulics.<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Features<br />
• Single and double scissor lift models for high reach available<br />
• Sealed bearing wheels for durability and cleanliness<br />
• Positive braking on rear wheels for safety<br />
• Overload valve ensures load limit is not exceeded<br />
• Special hydraulic valving allows the load to be<br />
lowered slowly<br />
• One piece table top for strength and easy cleaning<br />
• Handle folds flat for 150 and 300kg models<br />
• CE Compliance<br />
Applications<br />
• Raising heavy loads and a safe versatile way of transporting<br />
goods in warehouses, workshops, libraries, loading docks<br />
and hospitals<br />
Specifications<br />
• CE Compliance<br />
ORDER CODE<br />
Load Capacity (kg)<br />
Lift Range (mm)<br />
Table Size (mm)<br />
Mass (kg)<br />
Pacific Hoists<br />
Part No.<br />
203814 150 250 - 755 450 x 700 38 PLT150<br />
203271 300 312 - 900 500 x 800 75 PLT300<br />
203817 350 375 - 1400 500 x 900 117 PLT350<br />
204124 500 320 - 950 500 x 900 94 PLT500<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Lift Height<br />
(mm)<br />
203910 2.5 80-200<br />
Narrow Pallet Truck: Unit of Measure - Each<br />
• Lightweight - 45% lighter than conventional pallet truck.<br />
• Confi ned space manoeuvrability - only 520mm wide.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Lift Height<br />
(mm)<br />
203911 1.5 75-190<br />
Traverse Pallet Truck: Unit of Measure - Each<br />
203272 500 370 - 1130 500 x 700 101 PLT505<br />
203816 800 365 - 1000 550 x 1000 115 PLT800<br />
• 4 way steer.<br />
• Urethane wheels.<br />
• 1.5 tonne capacity.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Fork Width<br />
(mm)<br />
Fork Length<br />
(mm)<br />
Lift Height<br />
(mm)<br />
203878 1.5 685 1150 85-200<br />
208<br />
1300 722 999
Super Narrow Pallet Truck: Unit of Measure - Each<br />
Electric High Lift Pallet Truck: Unit of Measure - Each<br />
• Super narrow.<br />
• Urethane wheels.<br />
• 2.0 tonne capacity.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Fork Width<br />
(mm)<br />
Fork Length<br />
(mm)<br />
Lift Height<br />
(mm)<br />
203879 2.0 320 1150 75-200<br />
Quick Lift Pallet Truck: Unit of Measure - Each<br />
• Double speed pump.<br />
• Urethane wheels.<br />
• 2.5 tonne capacity.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Fork Width<br />
(mm)<br />
Fork Length<br />
(mm)<br />
Lift Height<br />
(mm)<br />
203885 2.5 685 1150 85-200<br />
Manual High Lift Pallet Truck: Unit of Measure - Each<br />
• Battery electric.<br />
• High lift.<br />
• 3 stage mast.<br />
• Lateral stabilisers prevent movement when raised.<br />
ORDER CODE<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
• High lift.<br />
• Three stage mast.<br />
• Lateral stabilisers prevent movement when raised.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Fork Width<br />
(mm)<br />
Fork Length<br />
(mm)<br />
Lift Height<br />
(mm)<br />
Capacity<br />
(tonnes)<br />
Fork Width<br />
(mm)<br />
Fork Length<br />
(mm)<br />
Lift Height<br />
(mm)<br />
Weight (kg)<br />
203874 1.0 685 1245 75 - 800 181<br />
203872 1.0 520 1245 75 - 800 180<br />
Stainless Steel Pallet Trucks: Unit of Measure - Each<br />
• Stainless Steel pallet truck.<br />
• Nylon wheels.<br />
ORDER CODE<br />
Capacity<br />
(tonnes)<br />
Fork Width<br />
(mm)<br />
Fork Length<br />
(mm)<br />
Lift Height<br />
(mm)<br />
203884 2.5 685 1150 82 - 200<br />
203882 2.5 520 1150 82 - 200<br />
203873 1.0 685 1150 75 - 800<br />
203871 1.0 520 1150 75 - 800<br />
WWW.BULLIVANTS.COM 209
Pacific Hoists Platform Trolleys: Unit of Measure - Each<br />
Features<br />
• Unloading skids in smaller workshops and warehouses<br />
• Economical alternative to expensive forklifts<br />
• High quality, heavy duty construction for reliability<br />
• Supplied with both work platform and fork tynes<br />
• CE Compliance<br />
• Both battery and manual versions available<br />
ORDER CODE<br />
Load Capacity<br />
(kg)<br />
Lift Range<br />
(mm)<br />
Table Size<br />
(mm)<br />
Operation<br />
Pacific Hoists<br />
Part No.<br />
203821 400 90 - 1200 650 x 580 Manual PHK120<br />
203822 400 90 - 1500 650 x 580 Manual PHK150<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
203823 400 90 - 1700 650 x 580 Manual PHK170<br />
203824 400 90 - 1200 650 x 580 Battery PHK125<br />
203825 400 90 - 1500 650 x 580 Battery PHK155<br />
203826 400 90 - 1700 650 x 580 Battery PHK175<br />
Pacific Hoists Porta Lift Trolley: Unit of Measure - Each<br />
Features<br />
• A cost effective portable lifting aid which enables one person to safely<br />
lift and manoeuvre up to 100kg, from ground level up to 1000mm high<br />
• Unique reverse braking system allows the load to stop at any position<br />
without having to lock or unlock pin or ratchets<br />
• Noiseless winch for silent operation<br />
• Elected for Australian Design Award by WorkCover<br />
ORDER CODE<br />
Load Capacity<br />
(kg)<br />
Max. Platform<br />
Height (mm)<br />
Plate Width<br />
(mm)<br />
Plate Length<br />
(mm)<br />
Mass (kg)<br />
Pacific Hoists<br />
Part No.<br />
204122 100 1000 400 635 27 LPL100<br />
Pacific Hoists Electric Lifter: Unit of Measure - Each<br />
Features<br />
• Economical alternative for a wide variety of lifting and moving applications<br />
• Swivel castors fitted with foot brakes<br />
• Easy to use up and down switching<br />
• Industrial wheels for durability<br />
• Innovative safety inertia device<br />
• 24V DC operation and fi tted with 2x 12V 7AH batteries<br />
• 240V AC – 24V DC battery charger supplied as standard<br />
ORDER CODE<br />
Load Capacity<br />
(kg)<br />
Max. Platform<br />
Height (mm)<br />
Plate Width<br />
(mm)<br />
Plate Length<br />
Mass (kg)<br />
Pacific Hoists<br />
Part No.<br />
204116 150 1540 520 460 58 PEL150<br />
210<br />
1300 722 999
Fabricated Lifting Product - Forklift Applications<br />
Our Forklift attachments come in many different shapes, sizes and capacities.<br />
All of the Forklift Attachments in our standard range add versatility and safety to<br />
your Forklift, making it a useful addition to the workplace. All of the attachments<br />
within our range are manufactured to our high standards to ensure compliance<br />
to all workplace rules and regulations as required under Australian Standards.<br />
We have a wide range of attachments available from low profi le to high<br />
profi le which are useful if you need to lift that little bit higher, also available are<br />
telescopic and extendable fork mounted jibs which can add extra reach when<br />
needed and be compacted/retracted when not, saving storage space.<br />
Forklift Attachments<br />
Forklift attachments turn your standard forklift into a more versatile, productive<br />
and safe materials handling tool. Bullivants’ range of forklift attachments are<br />
sturdy, simple to fit and easy to use<br />
Our Forklift Attachments are:<br />
• Robustly designed<br />
• Fully Certified<br />
• Proof Tested<br />
• Clearly marked with an identifi cation plate<br />
• Manufactured from Australian steel<br />
• Powder Coated<br />
• Simple to use<br />
• Easily adjusted (relevant models)<br />
With many features such as:<br />
• Adjustable spans<br />
• Swivel Hook lift points<br />
• Inclined Jib<br />
• Fitted with either safety chains or captive safety pins<br />
WARNING!<br />
• Before use a competent person shall check all lifting and structural<br />
components of the Forklift Attachment<br />
• Before use a competent person shall check all lifting equipment to be<br />
used with the Attachment<br />
• Always check the condition of the item or load to be lifted before lifting it<br />
• Always work within the capacity of the Forklift and attachment being used.<br />
Ensure that the attachment is not rated with a higher capacity than that of<br />
the Forklift.<br />
• Always be aware of the extra length that the attachment may add to the<br />
Forklift<br />
• When using jib style attachments be cautious of the load swinging and<br />
keep the load as close to the fl oor as possible<br />
• The Forklift being used shall be correctly maintained and inspected.<br />
2 tonne Extendable Forklift Boom: Unit of Measure - Each<br />
• Forklift requires 2 tonne at 1.3 metre centres for full boom capacity.<br />
ORDER CODE<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Maxi. WLL<br />
(tonnes)<br />
Closed (mm)<br />
1st Extension<br />
Point (mm)<br />
2nd Extension<br />
Point (mm)<br />
Fully Open<br />
(mm)<br />
A (mm)<br />
Unit Weight<br />
(kg)<br />
S1539030 2<br />
Position<br />
Length (mm)<br />
1300 1525 1750 1975<br />
WLL (tonnes) 2.0 1.65 1.3 0.95<br />
720 46<br />
Note: WLL will decrease depending on the position of the arms, see above<br />
5 tonne Extendable Forklift Boom: Unit of Measure - Each<br />
ORDER CODE<br />
Maxi. WLL<br />
(tonnes)<br />
A (mm)<br />
B (mm)<br />
C (mm)<br />
D (mm)<br />
E (mm)<br />
Unit Weight<br />
(kg)<br />
S1539082 5<br />
Position<br />
Length (mm)<br />
450 1150 1420 1780 2140<br />
WLL (tonnes) 5 3.5 2.5 1.75 1.25<br />
120<br />
Note: WLL will decrease depending on the position of the arms, see above<br />
WWW.BULLIVANTS.COM 211
4.5 tonne Incline Extendable Forklift Boom: Unit of Measure - Each<br />
ORDER CODE<br />
Maxi. WLL<br />
(tonnes)<br />
A (mm)<br />
B (mm)<br />
C (mm)<br />
D (mm)<br />
E (mm)<br />
Unit Weight<br />
(kg)<br />
S1539080 4.5<br />
Position<br />
Length (mm)<br />
481 1180 1440 1800 2160<br />
WLL (tonnes) 4.5 3.5 2.5 1.75 1.25<br />
Note: WLL will decrease depending on the position of the arms, see above<br />
120<br />
Forklift Drum Lifting Tongs: Unit of Measure - Each<br />
3 tonne Single Point Fork Attachment:<br />
Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
ORDER CODE<br />
WLL (kg)<br />
Drum Size (L)<br />
Unit Weight<br />
(kg)<br />
S1539100 700 200 70<br />
Drum Tipper: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (tonnes)<br />
Unit Weight<br />
(kg)<br />
S1539050 3 22<br />
2.5 tonne Forklift Tines Extension Slippers:<br />
Unit of Measure - Pair<br />
• Supplied in pairs<br />
ORDER CODE<br />
WLL (tonnes)<br />
Length (metre)<br />
Maximum Tine<br />
Width (mm)<br />
Unit Weight (kg)<br />
ORDER CODE<br />
WLL (kg)<br />
Drum Size (L)<br />
Unit Weight<br />
(kg)<br />
S1539110 2.5 1.9 130 57<br />
4 tonne Forklift Tines Extension Slippers:<br />
Unit of Measure - Pair<br />
S1539095 500 200 69<br />
2 tonne Single Point Fork Attachment:<br />
Unit of Measure - Each<br />
• Supplied in pairs<br />
ORDER CODE<br />
WLL (tonnes)<br />
Unit Weight<br />
(kg)<br />
ORDER CODE<br />
WLL (tonnes)<br />
Length (metre)<br />
Maximum Tine<br />
Width (mm)<br />
Unit Weight (kg)<br />
212<br />
S1539040 2 20<br />
S1539112 4 2 160 82<br />
1300 722 999
Forklift Waste Dumping Bin:<br />
Unit of Measure - Each<br />
Forklift Work Platform: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (tonnes)<br />
Unit Weight<br />
(kg)<br />
S1537160 1 164<br />
Fabricated Lifting Product - Crane & Overhead Lifting Applications<br />
ORDER CODE<br />
WLL (kg)<br />
Unit Weight<br />
(kg)<br />
201129 250 90<br />
Bullivants prides itself on setting the highest standards for quality and safety with all of our Crane and Overhead Lifting Devices.<br />
By offering engineering, manufacturing and reverse-engineering to industry we are able to support our customers with all of their<br />
lifting applications. Our Crane and Overhead Lifting Products are designed and manufactured in accordance with all relevant<br />
Australian Standards and are guaranteed to meet all criteria necessary to give our customers peace of mind.<br />
Our experienced team can custom design, re-certify, manufacture and repair virtually any type of lifting device used in industrial<br />
applications. Whilst our standard range offers versatility across a variety of applications, we understand that you may have a very<br />
specifi c lifting situation and our experienced and professional engineers can custom design a solution tailored exactly to your<br />
needs.<br />
Lifting & Rigging Equipment<br />
We can supply fully tested chain slings and hardware with your fabricated lifting product as a complete unit so that everything is<br />
ready to go when it gets to site.<br />
Be sure to ask our trained staff about this option when you request your quote.<br />
Spreader Beams<br />
5 tonne Extendable Spreader Beam: Unit of Measure - Each<br />
5 tonne Extendable Spreader Beam: Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
ORDER CODE<br />
WLL (tonnes)<br />
Load Hole CTC<br />
Distance (mm)<br />
5.2 2100<br />
ORDER CODE<br />
WLL (tonnes)<br />
Load Hole CTC<br />
Distance (mm)<br />
S1523034<br />
5.2 2600<br />
5.0 3100<br />
5.0 3600<br />
S1523035<br />
5 1200<br />
5 1450<br />
5 1700<br />
5 1950<br />
WWW.BULLIVANTS.COM 213
Lifting Beams<br />
35 tonne Container Lifting Beam: Unit of Measure - Each<br />
Conveyor Lifting Beam: Unit of Measure - Each<br />
• Heavy duty.<br />
• Approved, tested and certified with WLL clearly marked.<br />
• Powder coated safety yellow.<br />
• 90° maximum sling angle<br />
• Heavy duty.<br />
• Approved, tested and certifi ed with WLL clearly marked.<br />
• Engraved ID tag<br />
• Powder coated safety yellow.<br />
ORDER CODE<br />
WLL (tonnes)<br />
Length (m)<br />
Unit Weight<br />
(kg)<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
ORDER CODE<br />
WLL (tonnes)<br />
Length (m)<br />
Unit Weight<br />
(kg)<br />
S1502361 35 2.6 152<br />
S1504037 1 1.14 2.7<br />
S1504038 1 1.24 2.9<br />
S1504039 1 1.44 3.3<br />
S1504040 1 1.54 3.5<br />
S1504041 1 1.64 5.1<br />
S1504042 1 1.84 5.6<br />
S1504043 1 2.04 6.2<br />
214<br />
1300 722 999
Extendable Combination Lifting & Spreader Beams<br />
Bullivants’ combination beams are the perfect addition to your rigging arsenal.<br />
The combination of both lifting and spreader configuration provide a versatile<br />
solution to your rigging needs. In its spreader confi guration our combination<br />
beam offers greater WLL’s and in its lifting configuration it eliminates head<br />
room issues (at lower WLL’s).<br />
Our Combination Beams are:<br />
• Versatile<br />
• Fully Certified<br />
• Tested<br />
• Clearly marked with an identifi cation plate<br />
• Adjustable<br />
• Manufactured from Australian steel<br />
• Powder Coated<br />
And Come Complete With:<br />
• Profile cut Spreader and Lifting Points<br />
• Captive locking pins<br />
• Ground stands allowing access to the underside of the beam when not in use<br />
• A chart on the beam showing the beams WLL in all configurations<br />
WARNING!<br />
• Before use a competent person shall check the condition of the Beam<br />
• Before use a competent person shall check all lifting equipment to be<br />
used with the Beam<br />
• Never extend the Beam past its maximum allowable span<br />
• Always remember; The tare weight of the Beam will increase the load<br />
on the crane or hoist being used<br />
• Do not attempt to replace or repair any components of the Beam. Any<br />
repairs shall be conducted by Bullivants’<br />
• Before lifting the load ensure that the adjustment of the Beam is even<br />
and that the locking pins are securely in place<br />
• Never Modify the Beam to increase its adjustment range or capacity<br />
• Never attempt to adjust the beam in any way whilst under load. If the<br />
load is uneven in any way it must be lowered, assessed and then adjusted<br />
accordingly<br />
• Always ensure that the sling angles are correct before taking the load<br />
• Always know the weight of the load and be sure that all lifting equipment<br />
has an adequate WLL for the lift!<br />
8.6 tonne Combination Beam: Unit of Measure - Each<br />
ORDER CODE<br />
Open Length (mm)<br />
WLL as Lifting<br />
Beam (tonnes)<br />
WLL as Spreader<br />
Beam (tonnes)<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
3600 0.8 6.6<br />
S1504081<br />
3100 0.9 6.9<br />
2600 1.1 7.3<br />
2100 1.3 8.6<br />
15 tonne Combination Beam: Unit of Measure - Each<br />
ORDER CODE<br />
Lug Centers (mm)<br />
WLL as Lifting<br />
Beam (tonnes)<br />
WLL as Spreader<br />
Beam (tonnes)<br />
2650 3.1 15<br />
S1504151<br />
3050 2.7 14<br />
3450 2.4 13<br />
3850 2 13<br />
WWW.BULLIVANTS.COM 215
08 - <strong>MATERIALS</strong> HANDLING<br />
15 tonne Combination Beam (2.4m): Unit of Measure - Each<br />
ORDER CODE<br />
S15040690<br />
Lug Centers (mm)<br />
WLL as Lifting<br />
Beam (tonnes)<br />
WLL as Spreader<br />
Beam (tonnes)<br />
2290 3.1 15.0<br />
2690 2.7 15.0<br />
3090 2.4 15.0<br />
3490 2.0 15.0<br />
30 tonne Combination Beam: Unit of Measure - Each<br />
ORDER CODE<br />
S1504311<br />
Lug Centers (mm)<br />
WLL as Lifting<br />
Beam (tonnes)<br />
WLL as Spreader<br />
Beam (tonnes)<br />
4000 6.0 30<br />
4500 5.25 30<br />
5000 4.5 30<br />
Pipe End Caps<br />
Our End Cap range is the perfect versatile and affordable<br />
solution to your large lift needs. Offering high Working Load<br />
Limits (from 50t up to 220t), at greater spans than standard<br />
beams (up to 15mtrs). The Pipe End Caps simply slip over<br />
the end of the specified pipe and are then ready to go!<br />
Our Pipe End Caps are:<br />
• Versatile<br />
• Heavy Duty<br />
• Fully Certified<br />
• Tested<br />
• Clearly marked with an identification plate<br />
• Adjustable<br />
• Manufactured from Australian steel<br />
• Galvanised<br />
And Come Complete With:<br />
• Transport Lugs<br />
• Pipe Sections (optional - ask your nearest Bullivants<br />
Branch for details)<br />
WARNING!<br />
• Before use a competent person shall check the condition<br />
of the Caps<br />
• Before use a competent person shall check all lifting<br />
equipment to be used with the Caps (this includes the pipe)<br />
• Always remember; The tare weight of the Beam will<br />
increase the load on the crane or hoist being used<br />
• Do not attempt to alter or repair the End Caps. Any repairs<br />
shall be conducted by Bullivants’<br />
• Before lifting the load ensure that the load is even and that<br />
the Pipe End Caps are securely in place<br />
• Always ensure that the sling angles are correct before<br />
taking the load<br />
• Always take the weight of the load slowly. Shock-loading<br />
the end caps could cause them to slip off the pipe<br />
• Always know the weight of the load and be sure that all<br />
lifting equipment has an adequate WLL for the lift!<br />
5500 4.25 30<br />
6000 4.0 30<br />
50 tonne Combination Beam: Unit of Measure - Each<br />
ORDER CODE<br />
Lug Centers (mm)<br />
WLL as Lifting<br />
Beam (tonnes)<br />
WLL as Spreader<br />
Beam (tonnes)<br />
4000 6.5 50<br />
4500 6.0 50<br />
S1504350<br />
5000 5.4 50<br />
5500 4.9 50<br />
6000 4.5 50<br />
216<br />
1300 722 999
50 tonne Pipe End Caps: Unit of Measure - Pair<br />
• Supplied in pairs<br />
ORDER CODE<br />
WLL (tonnes)<br />
Length (m)<br />
Unit Weight<br />
(kg)<br />
S1504359 50 max 12 341<br />
50t x 12m Spreader With End Caps<br />
ORDER CODE<br />
S1504359<br />
Description<br />
50t x 12m Maximum assembly effective length spreader with end caps<br />
160599 SHACKLE: 35t GR‘S’ Safety Bow Shackle (Green Pin Vanbeest Safety Bow shackles only)<br />
*PIPE: 273.1 x 9.5 AS1163 GR350<br />
*Bullivants accepts no responsibility should the grade and size of pipe used differ from that which we have stated above.<br />
Assembly<br />
Effective Length<br />
Sling Apex Angle<br />
90° 75° 60° 45°<br />
3 (metre) 40t 45t 50t 55t<br />
4 (metre) 40t 45t 50t 55t<br />
5 (metre) 40t 45t 50t 55t<br />
6 (metre) 40t 45t 50t 55t<br />
7 (metre) 40t 45t 50t 55t<br />
8 (metre) 40t 45t 50t 55t<br />
9 (metre) 40t 45t 50t 55t<br />
10 (metre) 40t 45t 50t 55t<br />
11 (metre) 40t 45t 50t 55t<br />
12 (metre) 40t 45t 50t 55t<br />
100 tonne Pipe End Caps: Unit of Measure - Pair<br />
• Supplied in pairs<br />
ORDER CODE<br />
WLL (tonnes)<br />
Length (m)<br />
Unit Weight<br />
(kg)<br />
End Cap Dimensions<br />
50t End Caps add an additional 650mm total to lengths detailed<br />
(325mm each).<br />
e.g. Using a 3mtr piece of pipe on 50t end caps will give a<br />
centre line of lug dimension 3650mm.<br />
12mtr effective length = 11350mm length of pipe.<br />
These end cap dimensions must be considered when<br />
calculating length of pipe to be used and you must always do a<br />
review of your lift and have your pipe cut and rigging selected to<br />
suit your individual application.<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
S1504360 100 max 12 638<br />
100t x 12m Spreader With End Caps<br />
ORDER CODE<br />
Description<br />
S1504360<br />
100t x 12m Maximum assembly effective length spreader with end caps<br />
160622 SHACKLE: 85t GR‘S’ Safety Bow Shackle (Green Pin Vanbeest Safety Bow shackles only)<br />
*PIPE: 323.9 x 9.5 AS1163 GR350<br />
*Bullivants accepts no responsibility should the grade and size of pipe used differ from that which we have stated above.<br />
Assembly<br />
Effective Length<br />
Sling Apex Angle<br />
90° 75° 60° 45°<br />
3 (metre) 100t 115t 110t 125t<br />
4 (metre) 100t 115t 110t 125t<br />
5 (metre) 100t 115t 110t 125t<br />
6 (metre) 100t 115t 110t 125t<br />
7 (metre) 100t 115t 110t 125t<br />
8 (metre) 100t 115t 110t 125t<br />
9 (metre) 100t 115t 110t 125t<br />
10 (metre) 90t 115t 110t 125t<br />
11 (metre) 80t 100t 110t 125t<br />
12 (metre) 65t 85t 100t 125t<br />
End Cap Dimensions<br />
100t End Caps Add an additional 840mm total to lengths<br />
detailed (420mm each).<br />
e.g. Using a 3mtr piece of pipe on 100t end caps will give a<br />
centre line of lug dimension 3840mm.<br />
12mtr effective length = 11160mm length of pipe.<br />
These end cap dimensions must be considered when<br />
calculating length of pipe to be used and you must always do a<br />
review of your lift and have your pipe cut and rigging selected to<br />
suit your individual application.<br />
WWW.BULLIVANTS.COM 217
220 tonne Pipe End Caps: Unit of Measure - Pair<br />
• Supplied in pairs<br />
ORDER CODE<br />
WLL (tonnes)<br />
Length (m)<br />
Unit Weight<br />
(kg)<br />
S1504361 220 max 15 938<br />
220t x 15m Spreader With End Caps<br />
ORDER CODE<br />
S1404361<br />
Description<br />
220t x 18m Maximum assembly effective length spreader with end caps<br />
160624 SHACKLE: 150t GR‘S’ Safety Bow Shackle (Green Pin Vanbeest Safety Bow shackles only)<br />
*PIPE: 406.4 x 12.7 AS1163 GR350<br />
*Bullivants accepts no responsibility should the grade and size of pipe used differ from that which we have stated above.<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
Assembly<br />
Effective Length<br />
Sling Apex Angle<br />
90° 75° 60° 45°<br />
3 (metre) 205t 230t 250t 260t<br />
4 (metre) 205t 230t 250t 260t<br />
5 (metre) 205t 230t 250t 260t<br />
6 (metre) 205t 230t 250t 260t<br />
7 (metre) 205t 230t 250t 260t<br />
8 (metre) 205t 230t 250t 260t<br />
9 (metre) 205t 230t 250t 260t<br />
10 (metre) 205t 230t 250t 260t<br />
11 (metre) 205t 230t 250t 260t<br />
12 (metre) 205t 230t 250t 260t<br />
13 (metre) 180t 230t 250t 260t<br />
14 (metre) 160t 200t 250t 260t<br />
End Cap Dimensions<br />
220t End Caps Add an additional 980mm total to lengths<br />
detailed (490mm each).<br />
e.g. Using a 3mtr piece of pipe on 220t end caps will give a<br />
centre line of lug dimension 3980mm.<br />
15mtr effective length = 14020mm length of pipe.<br />
These end cap dimensions must be considered when<br />
calculating length of pipe to be used and you must always do a<br />
review of your lift and have your pipe cut and rigging selected to<br />
suit your individual application.<br />
15 (metre) 135t 170t 220t 260t<br />
218<br />
1300 722 999
Pallet Lifting<br />
Our range of pallet lifting products are designed to safely<br />
move pallets when Forklift access is unavailable. Both the Pallet<br />
Lifting Fork and Pallet Lifting Bars have been designed with the<br />
highest levels of safety and effi ciency in mind.<br />
Our Pallet Lifting Products are:<br />
• A safe “no fuss” solution to moving<br />
pallets without the use of a forklift<br />
• Fully Certified<br />
• Proof Tested<br />
• Clearly marked<br />
• Manufactured from Australian steel<br />
• Powder Coated<br />
And Come Complete With:<br />
• Multi lift points for load balancing (Pallet Lifting Fork only)<br />
• Square lifting frame (option only for Pallet Lifting Bars)<br />
WARNING!<br />
• Before use a competent person shall check all lifting<br />
and structural components of the Pallet Lifting Device<br />
• Before use a competent person shall check all lifting<br />
equipment to be used with the Pallet Lifting Device<br />
• Do lift uneven or unsteady loads<br />
• Where possible the load should be wrapped before<br />
being lifted<br />
• Always ensure that all movable components are in the<br />
correct position and secure before lifting the load<br />
• Always travel loads at the lowest possible height to reduce<br />
the risk of falling objects harming personnel<br />
• Always work within the capacity of the crane or hoist being<br />
used<br />
• Always maintain appropriate exclusion zones at all times<br />
• When moving loads with a crane care must be taken not<br />
to create a swinging load<br />
• Always use good lifting and rigging practice when using<br />
these items<br />
Pallet Lifting Fork: Unit of Measure - Each<br />
Pallet Lifting Frame (Square): Unit of Measure - Each<br />
ORDER CODE<br />
WLL (tonnes)<br />
Unit Weight<br />
(kg)<br />
S1505003 2 20<br />
Drum Lifting Frame: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (kg)<br />
Drum Size (L)<br />
Unit Weight<br />
(kg)<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
S1531020 700 200 53<br />
Double Drum Lifting Frame: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (tonnes)<br />
Unit Weight<br />
(kg)<br />
S1538011 2 116<br />
Pallet Lifting Bars: Unit of Measure - Pair<br />
• Supplied in pairs<br />
ORDER CODE<br />
WLL (tonnes)<br />
Unit Weight<br />
(kg)<br />
201127 2 18<br />
ORDER CODE<br />
WLL (tonnes)<br />
Drum Size (L)<br />
Unit Weight<br />
(kg)<br />
S1531022 1 200 102<br />
WWW.BULLIVANTS.COM 219
08 - <strong>MATERIALS</strong> HANDLING<br />
Bulka Bag With Fixed Arms: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (tonnes)<br />
Effective<br />
Width (mm)<br />
Unit Weight<br />
(kg)<br />
S1505010 1 1000 30<br />
Bulka Bag With Extendable Arms: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (tonnes)<br />
Effective Width<br />
(Closed) (mm)<br />
Effective Width<br />
(Fully Open) (mm)<br />
Unit Weight (kg)<br />
S1505005 2 800 1100 40<br />
Railway Line Lifting Tongs: Unit of Measure - Each<br />
Work Cages<br />
Bullivants’ Work Cages are designed to go above<br />
and beyond the requirements of AS1418.17 (Design and<br />
construction of Workboxes) offering you peace of mind when<br />
it comes to transporting personnel by means of crane. All of our<br />
Work Cages go through stringent design and testing procedures<br />
to ensure safety is maintained at all times.<br />
Our Work Cages are:<br />
• A safe and secure method for working at heights<br />
• Fully Certified<br />
• Proof Tested<br />
• Clearly marked with an identification plate<br />
• Third Party Verified<br />
• Manufactured from Australian steel<br />
• Powder Coated<br />
And Come Complete With:<br />
• 4 lifting points for optimum stability<br />
• Internal Handrails<br />
• Overhead Harness anchor points<br />
(on models with overhead protection)<br />
• Forklift slippers for transportation of<br />
empty work cage around the job site<br />
WARNING!<br />
• Before use a competent person shall check all lifting<br />
and structural components of the work cage<br />
• Before use a competent person shall check all lifting<br />
equipment and attachment points<br />
• Never enter or exit a suspended work cage except in<br />
the event of an emergency<br />
• Always work within the capacity of the crane being used.<br />
Ensure that you are working within the cranes SWL at the<br />
required radius<br />
• Never use work cages near live plant or equipment.<br />
Maintain appropriate exclusion zones at all times<br />
• All personnel within the Work Cage must be attached to<br />
the anchorage point via approved fall arrest equipment<br />
• The crane being used shall be correctly maintained and<br />
inspected as per AS2550.1<br />
• Work Cages shall only be used when no other means<br />
of transportation is possible. Never use a work cage as<br />
a substitute for normal means of transportation<br />
• Contact between the crane operator and the personnel in<br />
the cage must be maintained at all times and the operator<br />
shall stay at the crane controls at all times<br />
Workcage - 1 Person: Unit of Measure - Each<br />
• Galvanised bow shackle.<br />
• Approved, tested and certifi ed with WLL clearly marked.<br />
ORDER CODE<br />
WLL (tonnes)<br />
Maximum Jaw<br />
Opening (mm)<br />
Unit Weight<br />
(kg)<br />
S1530201 1.5 80 7.5<br />
ORDER CODE<br />
WLL (kg)<br />
Unit Weight<br />
(kg)<br />
S1537051 150 160<br />
220<br />
1300 722 999
Workcage - 2 Person: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (kg)<br />
Height (mm)<br />
Width (mm)<br />
Length (mm)<br />
Unit Weight<br />
(kg)<br />
S1537081 - with gate 300 2200 950 1500 206<br />
S1537083 - without gate 300 2200 950 1500 180<br />
Workcage - 1 Person (Circular): Unit of Measure - Each<br />
ORDER CODE<br />
WLL (kg)<br />
Height (mm)<br />
External<br />
Diameter<br />
(mm)<br />
Internal<br />
Diameter<br />
(mm)<br />
Unit Weight<br />
(kg)<br />
S1537111 250 2400 1000 700 246<br />
Lifting Hooks<br />
Eye Type Low Profile Container Lifting Hooks:<br />
Unit of Measure - Each<br />
• Supplied in pairs<br />
ORDER CODE<br />
WLL (tonnes)<br />
(pair)<br />
Type<br />
Unit Weight<br />
(kg) (pair)<br />
S1543010-1 22 Angled 5<br />
S1543010-2 22 Straight 5<br />
Self Adjusting Coil Lifting Hooks: Unit of Measure - Each<br />
Pipe Lifting Hook: Unit of Measure - Each<br />
• Supplied in pairs<br />
ORDER CODE<br />
WLL (tonnes)<br />
(pair)<br />
Fits Pipe Size<br />
(mm)<br />
Unit Weight<br />
(kg) (pair)<br />
S1543151 1.5 0-20 3<br />
S1543212 3 0-32 7.6<br />
S1543218 5 15-50 10.4<br />
Crok-Lok Vertical Plate Lifting Clamp:<br />
Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
ORDER CODE<br />
WLL (tonnes)<br />
Maximum Coil<br />
Width (mm)<br />
Unit Weight<br />
(kg)<br />
ORDER CODE<br />
WLL (tonnes)<br />
Clamp Range<br />
(mm)<br />
Unit Weight<br />
(kg)<br />
S1534021 1.5 3-20 6.6<br />
S1543216 5 1220 130<br />
S1543220 6 940 130<br />
S1534030 2.5 3-28 12.5<br />
S1534040 4 32-60 18<br />
WWW.BULLIVANTS.COM 221
08 - <strong>MATERIALS</strong> HANDLING<br />
3t Horizontal Plate Clamps (Non-Marring):<br />
Unit of Measure - Pair<br />
ORDER CODE<br />
WLL (tonnes)<br />
(pair)<br />
Clamp Range<br />
(mm)<br />
Unit Weight<br />
(kg) (pair)<br />
S153386 3 0-60 10<br />
6t Horizontal Plate Clamps (Non- Marring)<br />
ORDER CODE<br />
WLL (tonnes)<br />
(pair)<br />
Clamp Range<br />
(mm)<br />
Unit Weight<br />
(kg) (pair)<br />
Fabricated Lifting Product -<br />
Oxy/Acetylene Handling<br />
Handling gas bottles can be a very hazardous task if<br />
done incorrectly. That’s why Bullivants have ensured that<br />
their range of trolleys and lifting frames are of the highest<br />
quality and provide the safest means of transporting these<br />
dangerous items.<br />
Our Trolleys and Lifting Frames are:<br />
• Safe and easy to use<br />
• Versatile<br />
• Fully Certified<br />
• Proof Tested<br />
• Clearly marked with a welded on I.D. tag<br />
• Manufactured from Australian steel<br />
• Powder Coated<br />
And Come Complete With:<br />
• Heavy Duty Toolbox (Trolley only)<br />
• Available with fire extinguisher and/or fire blanket<br />
• Supplied with pneumatic tyres (Trolley only. Other<br />
wheel options available)<br />
• Captive locking pin (Trolley only)<br />
• Fitted with safety chains (Lifting Frame only)<br />
• Lifting Frame and Trolleys both come with single lifting point<br />
Lifting & Rigging Equipment<br />
We can supply fully tested chain slings and hardware with your<br />
fabricated lifting product as a complete unit so that everything is<br />
ready to go when it gets to site.<br />
Be sure to ask our trained staff about this option when you<br />
request your quote.<br />
WARNING!<br />
• Before use a competent person shall check all lifting and<br />
structural components of the Trolley/Lifting Frame<br />
• Before use a competent person shall check all lifting<br />
equipment to be used with the Trolley/lifting frame<br />
• Always ensure that the bottles being moved are secured<br />
correctly with safety pins or safety chains in place<br />
• Always use good lifting and rigging practice when using<br />
these items<br />
200 Kilogram 2 x Oxygen Bottle Trolley G size:<br />
Unit of Measure - Each<br />
S153387 6 0-60 17.5<br />
• Fits two Oxygen bottles<br />
• Supplied with pneumatic tyres.<br />
ORDER CODE<br />
WLL (kg)<br />
Unit Weight<br />
(kg)<br />
Wheel Type<br />
S1537126 200 76 Pneumatic Tyres<br />
222<br />
1300 722 999
100 Kilogram 2 x Bottle Trolley D Size:<br />
Unit of Measure - Each<br />
200 Kilogram 2 x Bottle Trolley G Size:<br />
Unit of Measure - Each<br />
• Fits one Oxygen bottle with either one of the<br />
following bottles: Acetylene, Propane or LPG<br />
• Supplied with pneumatic tyres.<br />
ORDER CODE<br />
WLL (kg)<br />
Unit Weight<br />
(kg)<br />
Wheel Type<br />
S1537121B 100 60 Pneumatic Tyres<br />
150 Kilogram 2 x Bottle Trolley E Size:<br />
Unit of Measure - Each<br />
• Fits one Oxygen bottle with either one of the<br />
following bottles: Acetylene, Propane or LPG<br />
• Supplied with pneumatic tyres or solid wheels.<br />
ORDER CODE<br />
WLL (kg)<br />
Unit Weight<br />
(kg)<br />
Wheel Type<br />
S1537122 200 76 Pneumatic Tyres<br />
S1537124 200 76 Solid Wheels<br />
200 Kilogram 2 x Bottle Lifting Frame & 400 Kilogram<br />
4 x Bottle Lifting Frame: Unit of Measure - Each<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
• Fits one Oxygen bottle with either one of the<br />
following bottles: Acetylene, Propane or LPG<br />
• Supplied with pneumatic tyres.<br />
ORDER CODE<br />
WLL (kg)<br />
Unit Weight<br />
(kg)<br />
Wheel Type<br />
S1537122A 150 60 Pneumatic Tyres<br />
200 Kilogram 2 x Bottle Lifting Frame:<br />
• Fits one Oxygen bottle with either one of the<br />
following bottles: Acetylene, Propane or LPG<br />
400 Kilogram 4 x Bottle Lifting Frame:<br />
• Fits two Oxygen bottles with a combination of<br />
either two Acetylene, Propane or LPG bottles<br />
• Use as a lifting frame or with a forklift.<br />
ORDER CODE<br />
WLL (kg)<br />
Height A (mm)<br />
Width B (mm)<br />
Length C<br />
(mm)<br />
Unit Weight<br />
(kg)<br />
S1537121 200 1890 400 645 35<br />
S1537121A 400 1860 623 730 61<br />
WWW.BULLIVANTS.COM 223
08 - <strong>MATERIALS</strong> HANDLING<br />
Fabricated Lifting Product - Goods Cages<br />
Bullivants’ range of Goods Cages have been designed to offer a wide range of options including various capacities and<br />
confi gurations without compromising on quality and value. Our goods cages provide the safest solution to the transportation and<br />
storage of loose loads and can be lifted by forklift or by sling.<br />
Our Goods Cages are:<br />
• A safe and secure method for transporting and storing loose loads<br />
• Fully Certified<br />
• Tested<br />
• Clearly marked with an identifi cation plate<br />
• Manufactured from Australian steel<br />
• Powder Coated<br />
And Come Complete With:<br />
• 4 lifting points for optimum stability<br />
• Drop sides or swinging gates (some models)<br />
• Forklift Pockets (except on the Pallet Lifting Cage)<br />
Lifting & Rigging Equipment<br />
We can supply fully tested chain slings and hardware with your fabricated lifting product as a complete unit so that everything is<br />
ready to go when it gets to site.<br />
Be sure to ask our trained staff about this option when you request your quote.<br />
WARNING!<br />
• Before use a competent person shall check all lifting and structural components of the goods cage<br />
• Before use a competent person shall check all lifting equipment to be used with the goods cage<br />
• Always know the weight of the load to be lifted<br />
• Ensure that the load is even before lifting the cage<br />
• Always ensure that the drop side or swinging gate are closed securely before lifting the cage<br />
• Ensure that the contents of the cage cannot fall out. Wrapping the contents of the cage may be<br />
necessary to ensure the security of the load<br />
Goods Cage: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (tonnes)<br />
Description<br />
Height (mm)<br />
Width (mm)<br />
Length (mm)<br />
Unit Weight<br />
(kg)<br />
S1537005-2 0.5 Without Drop Side 500 500 500 45<br />
S1537005-4 0.75 Without Drop Side 750 760 760 73<br />
S1537007-4 0.75 With Drop Side 750 762 762 73<br />
S1537005-6 1 Without Drop Side 1000 1012 1012 126<br />
S1537007-6 1 With Drop Side 1000 1000 1000 135<br />
Pallet Lifting Cage: Unit of Measure - Each<br />
ORDER CODE<br />
WLL (tonnes)<br />
Height (mm)<br />
Width (mm)<br />
Length (mm)<br />
Unit Weight<br />
(kg)<br />
S1537009 1 1250 1370 1370 160<br />
224<br />
1300 722 999
Frequently Asked Questions<br />
Q - I have a ‘one off job’ that cannot be done by use of the Standard Product range,<br />
how can Bullivants help me?<br />
A - Bullivants’ Engineering Department can help by working closely with you to design, fabricate and certify an<br />
engineered product to safely complete your ‘one off job’.<br />
Q - Why choose Bullivants as your Engineered Product Supplier?<br />
A - Peace of Mind.<br />
When you choose Bullivants as your Engineered Product Specialist you can be assured that you are getting a<br />
SAFE and HIGH QUALITY product. Our standard Engineered Product range is:<br />
1. Australian made - This means that the materials used to fabricate Bullivants’ standard Engineered Product<br />
range are of high quality and manufactured locally, supporting Australian jobs.<br />
2. Backed by Knowledge - We have our own Engineering Department at our head office and product<br />
specialists at each of our 24 branches, located across Australia, dedicated to providing the upmost level<br />
of customer service.<br />
3. In stock- We are committed to providing our customers with a timely and efficient supply chain. Stock is held<br />
in our branch locations and also centrally with our manufacturers ready to ship.<br />
4. Compliant to Australian Standards - Not only is Bullivants’ Engineered Product range made in accordance<br />
with stringent Australian Standards but your local branch can have the item added to your register before it<br />
gets to your worksite. This eliminates the gap between supply of the item and the first inspection of the item<br />
by utilising the Bullivants BEAM system (Bullivants Electronic Asset Management). Ask your local branch for<br />
details on the BEAM system.<br />
Q - I have some Materials Handling gear on site which has no identification and I am<br />
unsure if it is safe to use, what should I do?<br />
08 - <strong>MATERIALS</strong> HANDLING<br />
A - All Materials Handling equipment, under Australian Standards, must have identification with traceability back to the<br />
manufacturer. If you do have non-identifiable gear on site Bullivants’ Engineering Department can reverse engineer<br />
the item to determine what the item is capable of and certify/test accordingly.<br />
WWW.BULLIVANTS.COM 225