INDUSTRIAL TANKS

CONE BOTTOM TANKS
• Available in 30, 45 and 60-degree slopes, sizes
range from 15-13,000 gallons.
• Material options for a diverse range of application
requirements.
- High-density linear polyethylene (HDLPE)*-
black and natural white color - Complies with
FDA Regulation 177.1520 and NSF standard 61.
- Cross-linked, high-density polyethylene
(XLPE) - black and natural white color
*Opaque white sodium hypochlorite resin #880059
*Sulfuric acid HDLPE resin #880046
• Available with seismic zone 4 and UBC 110 mph
wind restraint tie- down systems.
• Specific gravity ratings are based on the industry’s
most severe calculation.
• Standard specific gravity choices are 1.5 and 1.9,
other ratings are available upon request. Maximum
operating temperature is 100º F.
• All materials are UV stabilized for long-term outdoor
service.
Part No. Gallons Diameter Cone Degree
Height in
Stand Manway
152-- 15 17” 45 38” 17”
185-- 17 19” 60 34” 10”
158-- 35 30” 30 34” 10”
156-- 65 30” 30 41” 10”
H15601-- 70 32” 60 54” 8”
607-- 110 30” 30 56” 10”
*H15604-- 225 48” 30 55” 18”
*H15605-- 325 48” 30 66” 18”
H15603-- 475 60” 30 69” 18”
H18801-- 500 60” 45 60” 18”
619-- 500 64” 45 80” 18”
188-- 500 86” 30 60” 10”
189-- 1000 86” 30 66” 10”
5000-- 1000 64” 45 117” 18”
8310-- 1250 95” 30 91” 18”
190-- 1400 86” 30 94” 10”
5010-- 1500 64” 45 158” 18”
8330-- 1600 95” 30 95” 18”
191-- 1650 86” 30 110” 10”
5070-- 2000 90” 30 125” 18”
5110-- 2500 90” 30 148” 18”
8350-- 2500 95” 30 125” 18”
5100- 2600 90” 45 160” 18”
5150-- 3000 90” 30 167” 18”
8360-- 3000 95” 30 141” 18”
5440-- 3900 90” 30 203” 18”
5180-- 4100 90” 45 216” 18”
5200-- 4400 90” 30 222” 18”
7040-- 5500 90” 30 255” 18”
5280-- 6000 142” 30 159” 18”
7180-- 6500 90” 30 296” 18”
5320-- 7400 142” 30 179” 18”
5340-- 11,500 142” 30 238” 18”
7490-- 13,000 142” 30 260” 18”
*Tank comes complete with poly stand only.
Large cone bottom tanks
ranging in sizes from 2,500 to
13,000 gallons, are used to
store and deliver up to 10,000
cubic ft. of bulk resins at a
processing plant.
Smaller cone bottom tanks are ideal for small
mix or batch applications.
12
ALL DIMENSIONS AND CAPACITIES ARE NOMINAL AND SUBJECT TO CHANGE.
FOR DRAWINGS AND ADDITIONAL INFORMATION VISIT WWW.SNYDERNET.COM