DISCARD
Cerona-42 - Fireplaces Plus
Cerona-42 - Fireplaces Plus
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Model: Cerona-42<br />
Log Assembly: LOGS-Cerona42<br />
If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately,<br />
refer to the following instructions.<br />
CAUTION: Carefully remove the logs<br />
from the packaging. Logs are fragile!<br />
4<br />
5<br />
2<br />
1<br />
3<br />
6<br />
Figure 12.12<br />
STEP 1. LOG #1 (SRV2107-701):<br />
Place log #1 over the back side of the burner<br />
plate and slide forward until log hits the grate.<br />
Log cut out should fi t over pilot bracket. See<br />
Figure 12.13.<br />
1<br />
Figure 12.13<br />
STEP 2. LOG #2 (SRV2107-702):<br />
Fit log #2 on the right side of the grate. The<br />
log is formed so it will sit around the right grate<br />
bar. Rest the top of the log on the fl at section<br />
of log #1. See Figure 12.14<br />
2<br />
FORM FITTED<br />
TO GRATE TINE<br />
Figure 12.14<br />
2107-935<br />
Heat & Glo • Cerona-36, Cerona-42 • 2106-900 Rev. G • 09/08 41
Change language