Series 600 “dia-PUMP”
Series 600 âdia-PUMPâ - Tecfluid
Series 600 âdia-PUMPâ - Tecfluid
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DIMENSIONS<br />
MODEL 635-N3<br />
WITH ELECTRIC<br />
STROKE CONTROL<br />
MODELS 610-615 (316SS HEADS)<br />
MATERIALS OF CONSTRUCTION<br />
4 7/16<br />
[113]<br />
CODE CODE CODE<br />
PART N3 N4 N5<br />
Liquid Head 316SS C-20 *PVC*<br />
Diaphragm ®<br />
Teflon ® ® Teflon ® ® Teflon ®<br />
Valve Body & Seat 316SS C-20 *PVC*<br />
Valve Checks 316SS C-20 **Ceramic**<br />
“O”-rings Viton ® Viton ® Viton ®<br />
*PVC head pumps satisfactory for temperatures to 125°F/52°C.<br />
**Special materials available for services not compatible with ceramic.<br />
MODELS 620-625 (316SS HEADS)<br />
ORDERING INFORMATION<br />
When ordering, please include<br />
the following information:<br />
1. Description of liquid to be pumped. Include chemical name,<br />
concentration, viscosity, pH and temperature of solution.<br />
2. Maximum, normal and minimum pump capacity required.<br />
3. Discharge pressure required.<br />
4. Suction conditions.<br />
5. Motor characteristics required.<br />
4 13/16<br />
[122]<br />
MODELS 635-637 (316SS & C-20 HEADS)<br />
NOTES<br />
1. CAPACITY:<br />
Capacity figures are listed at 100 psi discharge<br />
pressure, based on water using 1725 rpm<br />
motor. Capacity will decrease by approximately<br />
1.5% for each 100 psi increase in pressure.<br />
2. ACCURACY:<br />
Accuracy is ±1% of full scale over the range<br />
of 10% to 100% of capacity.<br />
3. TEMPERATURE/VISCOSITY:<br />
Contact factory for temperatures over 200°F<br />
(93°C) or viscosity greater than 1000 centipoise.<br />
MODEL 647<br />
(316SS & C-20 HEADS)<br />
MODELS 635-647<br />
(PVC HEADS)<br />
MODEL 647<br />
(316SS & C-20 HEADS)<br />
& MODELS 635-647<br />
(PVC HEADS)