ACRILEM 359

Protection for hands:
Not needed for normal use.
Respiratory protection:
Not needed for normal use.
Thermal Hazards:
None
Environmental exposure controls:
None
The emissions from ventilation or work process equipment should be checked to ensure compliance with the
directives of the binding legislation on environmental protection. In some cases, to reduce emissions, might be
needed maintenance or technical plant modifications.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance and colour: White liquid
Odour: not significant
Odour threshold: N.D. mg/m3
pH: 3.4 25°C
Melting point / freezing point: > 0°C
Initial boiling point and boiling range: 100 °C
Upper/lower flammability or explosive limits: No data (data not available).
Vapour density: N.D.
Flash point: N.A.
Evaporation rate: N.D.
Vapour pressure: N.A.
Relative density: 1 g/cm3
Solubility in water: completely miscible
Partition coefficient (n-octanol/water): N.A.
Auto-ignition temperature: non applicabile
Decomposition temperature: N.D.
Viscosity: 110 mPa.s (25°C) Brookfield RVT
Explosive properties: Not Relevant
Oxidizing properties: Not Relevant
9.2. Other information
Conductivity: N.D.
Substance Groups relevant properties N.A.
The values do not always conform to the specifications of the product. See the specific technical
documentation for data.
Solids content: 47,3 %
SECTION 10: Stability and reactivity
10.1. Reactivity
Stable under normal conditions
10.2. Chemical stability
Stable under normal conditions
10.3. Possibility of hazardous reactions
None
10.4. Conditions to avoid
Stable under normal conditions.
10.5. Incompatible materials
None in particular.
10.6. Hazardous decomposition products
None.
When heated (decomposition) or in case of fire may liberate carbon oxides, gases and vapors which are
ACRILEM 359, Safety Data Sheet dated 20/3/2015, version 1 - Pag. 4/7