Premium Primed Siding Trim Boards Fascia & Exterior Mouldings

Products with 30 Year
Untreated Products.
Primed Trim Boards – Available in 1x, 5/4x and 2x sizes.
Trim boards are S3S (surfaced three sides) and E2E (eased two edges) for a
superb look. Use for general trim, Fascia, and most above ground - non
structural applications. Finish with two coats of quality 100% acrylic paint.
Available in Kelleher Advantage Plus with 30 year warranty or Kelleher
Advantage Series primed.
Primed Boards S3S E2E
Dimensions
1 x 2 x 16’ & 20’ Plus/Advantage
1 x 3 x 16’ & 20’ Plus/Advantage
1 x 4 x 16’ & 20’ Plus/Advantage
1 x 6 x 16’ & 20’ Plus/Advantage
1 x 8 x 16’ & 20’ Plus/Advantage
1 x 10 x 16’ & 20’ Plus/Advantage
1 x 12 x 16’ & 20’ Plus/Advantage
Primed Boards S3S E2E
Dimensions
5/4 x 4 x 16’ & 20’ Plus
5/4 x 6 x 16’ & 20’ Plus
5/4 x 8 x 16’ & 20’ Plus
2 x 2 x 16’ Plus/Advantage
2 x 4 x 16’ & 20’ Plus/Advantage
2 x 6 x 16’ & 20’ Plus/Advantage
2 x 8 x 16’ & 20’ Plus/Advantage
2 x 10 x 16’ & 20’ Plus/Advantage
2 x 12 x 16’ & 20’ Plus/Advantage
More About Kelleher Advantage Plus
Advantage Plus products are primed fingerjointed pine, sourced from
sustainably grown plantation forests. Products are paint ready, durable, safe
to handle, safe for interior and exterior use, termite resistant, defect free,
non-corrosive. Specially formulated BodyGuard End Sealer, available in
paint or spray, protects wood where cuts and notches are made.
Treated Sidings feature:
Treated Sidings feature:
More About Advantage Primed Products
The sidings and trim boards pictured here are also available in Kelleher Advantage
Series products. Kelleher Advantage products are primed, fingerjointed pine, with
two factory applied coatings. They are not treated, and do not carry the same
warranty or certifications as Kelleher Advantage Plus products; they are ideal for
more moderate climates. Finish with two coats of quality 100% acrylic paint.