formulated

5615 E. Powhatan Ave Tampa, FL 33610 • (813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632 

5615 E. Powhatan Ave Tampa, FL 33610 • (813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632 

Astragals and Thresholds 

DLP Industries New Stainable Aluminum Astragal 

DLP Industries, Inc. is proud to introduce our new stainable aluminum astragal. Our new painting process was formulated 

specifically for DLP and allows for our product to be top-coated to match your doors using an oil-based stain, 

a latex paint, or an oil-based paint. As always, our aluminum astragals continue to maintain Florida Building Code 

Compliance. 

Staining Instructions: 

The door and Astragal should be stained as one 

1. Wipe down the door and astragal with acetone to remove any contaminates or oil. 

2. Allow acetone to dry, then tape off or remove the trim strips and hardware that’s installed into the 

astragal in preparation for applying the stain. 

3. Apply an oil-based interior wiping stain using a chip brush. Apply the stain in light coats, following the grain of 

your door. Once each coast becomes tacky, brush it using your chip brush to create the effect of wood grain. 

Let each coat dry thoroughly before applying the next, making sure to apply at least 2 coats. 

4. Once your stain has fully cured, apply a SPAR Varnish for protection from the elements. 

Follow the manufacturers’ suggestions for this application. 

U.S. Patents Pending

DLP Industries Aluminum Astragal 

Feel safe and secure with the DLP Aluminum Astragal between your doors. We believe that the home is a safe haven and 

every astragal that DLP manufactures is made to produce the highest design pressures possible for Florida Building Code 

and HVHZ Compliance. We do not need a separate “Hurricane Kit” to increase our design pressure as all of our astragals 

are assembled in the exact same fashion. We at DLP strive to maintain a quality, high-performance product while keeping 

the cost to a minimum. Our patented locking system and installation methods make for the easiest and most cost effective 

system in the industry. 

Toggle lock technology 

provides the ultimate security 

providing simple and smooth 

operation and eliminates the 

ability of unlocking the astragal 

from the outside. 

Custom Preps 

• All Astragals are cut to each customer’s door specifications. 

• For added strength and security we notch the ends of our 

astragal to mate with each customer’s header and sill 

• Multi-point lock preps are available 

All aluminum astragal body 

encapsulates the inactive door, comes 

fully prepped to each customer’s door 

specs and is installed in minutes. 

Flush screw bosses 

provided can be used without 

strike plates or have the ability to 

receive the strike plates supplied 

with your dead-bolt and doorknob 

lock sets. 

DLP Industries Thresholds 

For security and weather protection. 

• Florida Building Code compliant 

• Available in aluminum, bronze, bright gold, and oak 

• Many style specifications available 

2” bolt throw and a 4” aluminum stiffener 

for added security and design pressures. 

Security Strip is optional for outswing applications providing added security 

and eliminating the reveal between the doors for a clean finished appearance. 

Header Strike Plate receives the slide bolt 

is supplied with every astragal to reinforce the 

header and eliminate blow out. 

Specially formulated header 

and sill boots are fused to the ends 

of the astragal providing ultimate protection 

against water infiltration. 

26 inch slide bolt allows 

for easy operation of the locking 

mechanisms without the need for 

a stool or ladder to reach the lock. 

Sill bolt receiver provides 

protection against water infiltration 

as well as a finished appearance. 

New Stainable Aluminum Finish 

(Formulated by DLP) 

Also available in White and Bronze 

US PATENT # 7.513.539

Company Profile 

Thanks for taking time to look through our catalog. 

Since 1974, DLP Industries has become a major supplier of quality door components. Although our 

concentration has been on supplying customers in the Southeastern states, our product quality and 

prompt service has earned us many loyal customers nationwide. 

This catalog represents only the standard door component items that we manufacture. If you should have 

the need for a special component, we have the capability to manufacture custom parts in our tooling and 

stamping facility. 

At DLP Industries we pride ourselves on producing the highest quality components on the market. 

We truly believe quality pays off in the long run for both us and you, the customer. 

We know how important prompt, efficient service is to our customers. We maintain an extensive 

inventory of component items as well as the materials to manufacture the custom “made to order 

components” that we sell. 

We appreciate this opportunity to show you our products and would like to have the opportunity to 

include you among our many satisfied and valued customers. 

With best regards, 

David L. Phipps, President 

DLP INDUSTRIES, INC. 

1 

5615 E. Powhatan Ave Tampa, FL 33610 

(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632

Astragal Ordering Information 

Astragal Security Strip 

Color Availability: White, Bronze or Stainable Aluminum 

Package Quantity: 6 

Standard Notch Header: 5/8” 

Standard Notch Sill: 1” 

Standard 6’8”: 79 5/16” 

Standard 8’0”: 95 5/16” 

*(Lengths and Notches can be ordered to your specifications) 

*(No notch is required for inswing sill) 

Handed: LOS,LIS,ROS,RIS 

PLEASE NOTE: Astragal handing is 

ordered OPPOSITE of your active door. 

Inactive 

US PATENT # 7.513.539 

Active 

Features 

• For use on outswing doors 

• Covers all locking mechanisms on outswing doors 

• Fills any gaps that may occur due to improper door hanging 

• All aluminum construction 

• Comes complete with predrilled holes and notched for 

deadbolt and door knob 

Color Availibility: White 

*(Length and Notch to be specified when ordered) 

PLEASE NOTE: Security strip handing 

is ordered SAME as the Astragal. 

(Example: LOS Astagal = Lefthand 

Security Strip). 

Inactive 

Active 

*** (Make sure to add 1/4 inch to 

your header/sill stop notch 

measurement for rubber boot) 

Security Strip is optional for outswing applications providing added security and eliminating the reveal between the doors for a 

clean finished appearance. 

2 

3 


(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632 


(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632

Astragal Replacement Hardware Set 

Wood Astragal 

ASTHW 

Hardware Bag for “White” Astragals 

2- Stiffeners 

4- Boots (1 ea. – LIS, LOS, RIS, ROS) 

1- Small Glue Bottle 

2- Screw Bosses w/Screws (4) 

20- #8 screws 

1- Header/Sill Plate 

ASTBHW 

Hardware Bag for “Bronze” Astragals 

2- Stiffeners 



2- Screw Bosses w/Screws (4) 

20- #8 screws 


Wood Interior T-astragal for 1 3/8” double doors 

Options: 

Finger joint or clear pine 

6’8” or 8’ 

With slide-bolt prep or without slide-bolt prep 

*** 8’ Astragal is ordered left or right 

hand and opposite of the active door. 

(Ex. Left hand active door = Right 

hand astragal) 

ASTBTHW 

Boot Hardware Bag for “Any Color” Astragal 



ASTSTHW 

Stiffener Hardware Bag for “Any Color” Astragal 

2- Stiffeners 

6- #8 screws 

ASTFSHW 

Filler Strip Hardware Bag for “ White” Astragals 

2- 20 3/8” Filler Strips 

1- 10 ½” Filler Strip 

1- 29” Filler Strip 



20- #8 screws 

ASTBFSHW 

Filler Strip Hardware Bag for “ Bronze” Astragals 

2- 20 3/8” Filler Strips 


1- 29” Filler Strip 



20- #8 screws 

4 

ASTSBR 

1- Sill Bolt Receiver 

Sill Bolt Receiver 

5 


(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632 


(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632

Outswing Thresholds 


QOSH series 

1 ¼” high QLON Outswing threshold for use with 4 9/16” jambs 

All Thresholds are Manufactured Inhouse 

Custom sizes and Shapes Available upon Request 

Cypress Substrate Standard in Thresholds 

Options: 

Mill Finish, Bronze, or Bright Gold Finish 

Jamb notches 

Screw holes 

Composite substrate 

Sill extender EXTQOSH1 

for 5 ¼” jambs 

Sill extender EXTQOSH2 

for 6 9/16” jambs 

QOSH5 

QOSH series outswing threshold with the sill extender “EXTQOSH1” added for use with 5 ¼” jambs 

QOSH6 

QOSH series outswing threshold with the sill extender “EXTQOSH2” added for use with 6 9/16” jambs 

6 

All thresholds available in any custom length 

All thresholds available in any custom length 7 

Manufacturer of Quality 

Door Components Since 1974 

2125 S.W. 60th 

5615 

Way 

E. Powhatan 

• Hollywood, 

Ave Tampa, FL 

FL 

33610 

33023 

(954)963-7373 • 1-800-243-7373 

(813) 971-4700 • (800) 966-7753 

• Fax (954)963-7377 

• Fax: (813) 977-5632 

Manufacturer of Quality 

Door Components Since 1974 

2125 S.W. 60th 

5615 E. 

Way 

Powhatan 

• Hollywood, 

Ave Tampa, FL 

FL 

33610 

33023 

(954)963-7373 • 

(813) 

1-800-243-7373 

971-4700 • (800) 966-7753 

• Fax 

• 

(954)963-7377 

Fax: (813) 977-5632



QOSR series 

1 ¾” high Outswing threshold for use with 4 9/16” jambs 

** This threshold eliminates HVHZ water infiltration issues and works well with marble flooring 

Options: 

Mill Finish, Bronze, 

or Bright Gold Finish 

Jamb notches 

Screw holes 


QOSO series 

1 3/8” high QLON Outswing Oak threshold for use with 4 9/16” jambs 

***This threshold features a 

beautiful natural red oak top 

Options: 



Jamb notches 

QOSR 6 

1 ¾” high Outswing threshold for use with 6 9/16” jambs 

** This threshold eliminates HVHZ water infiltration issues and works well with marble flooring 

QOSO5 

1 ¼” high QLON Outswing Oak threshold for use with 5 ¼” jambs 

***This threshold features a beautiful natural red oak top 

QOSO6 

1 ¼” high QLON Outswing Oak threshold for use with 6 9/16” jambs 

***This threshold features a beautiful natural red oak top 

8 




(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632 


(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632


Inswing Thresholds 

QOS series 

1” high QLON Outswing threshold for use with 4 9/16” jambs 

Options: 

Mill Finish 

Jamb notches 

Screw holes 


All Thresholds are Manufactured Inhouse 

Custom Sizes and Shapes Available upon Request 

Cypress Substrate Standard in Thresholds 

LB series 

5/8” high “Low Bumper” Outswing bump threshold 

Options: 

Mill or Bronze Finish 

Individually Packed in poly tubing 

HB series 

1” high “High Bumper” Outswing bump threshold 

Options: 



10 




(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632 


(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632



ISW series 

Inswing Height Adjustable Wide threshold for 5 1/4” jambs 

***This threshold adjusts from 1 1/8” up to 1 5/16” high 

Options: 


Sill extender EXT2 for 6 9/16” jambs 


ISH series 

Inswing Height Adjustable threshold for 4 9/16” jambs 


Options: 


ISW6 

ISW series threshold with the sill extender “EXT2” added for use with 6 9/16” jambs 

ISO series 

Inswing Oak adjustable height threshold for 4 9/16” jambs 

***This threshold features a beautiful natural red oak riser and adjust from 1 ¼” to 1 1/2” high 

Options: 


ISW7 

ISW series threshold with the sill extender “EXT3” added for use with 7 1/4” jambs 

12 




(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632 


(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632



ISWO series 

Inswing Oak adjustable height threshold for 5 1/4” jambs 

***This threshold features a beautiful natural red oak riser and adjust from 1 ¼” to 1 1/2” high 

Options: 



Sill extender EXT2 


Sill extender EXT3 


ISCS series 

Inswing Covered Seal adjustable threshold for use with 4 9/16” jambs 


Options: 



Composite Substrate 

Sill extender EXT1 for 5 ¼” jambs 


ISWO6 

ISWO series inswing oak threshold with the sill extender “EXT2” added for use with 6 9/16” jambs 

ISCS5 

ISCS series threshold with the sill extender “EXT1” added for use with 5 1/4” jambs 

ISWO7 

ISWO series inswing oak threshold with the sill extender “EXT3” added for use with 7 1/4” jambs 

ISCS6 

ISCS series threshold with the sill extender “EXT3” added for use with 6 9/16” jambs 

14 




(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632 


(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632


A.D.A. Compliant Thresholds 

LS series 

11/16” high Inswing “Low Saddle” threshold 

Options: 

Mill Finish 


HS series 

15/16” high Inswing “High Saddle” threshold 

Options: 



16 




(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632 


(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632



ISHC4 series 

A.D.A. Approved 4” wide Inswing handicap threshold with screw holes 

Options: 

Mill Finish 

Jamb Notches 

ISHC6 series 


Options: 

Mill Finish 

Jamb Notches 

ISTB series 


*** This threshold was designed to butt up to tile or other floor coverings 

Options: 

Mill Finish 

Jamb Notches 

TCHC series 

A.D.A. Approved 4 ¼” wide Outswing handicap threshold with vinyl weatherstrip and mounting holes 

Options: 

Mill Finish 

Jamb Notches 

ISHC series 


Options: 

Mill Finish 

Jamb Notches 

OSHC series 

A.D.A. Approved 5” wide Outswing handicap threshold with vinyl weatherstrip and mounting holes 

Options: 

Mill Finish 

Jamb Notches 

18 




(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632 


(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632

Door Seals, Sweeps and Extenders 

Bug Sweep 

Door Sweep weather-strip with mounting holes 

Options: 

Mill Finish Aluminum 

Poly bagged with screws 

3/16” 

1.5” 

Jamb-Up 

Door Jamb weather-strip with mounting holes 

Options: 

Mill Finish Aluminum 

Poly bagged with nails 

EXT1 

This product extends the ISCS series threshold to 5 ¼” 

Options: 


EXTQOSH1 

This extends the QOSH series threshold to 5 1/4” 

Options: 


EXT2 

This product extends the ISW and ISWO series 

thresholds to 6 9/16” 

Options: 


EXTQOSH2 

This extends the QOSH series threshold to 6 9/16” 

Options: 


EXT3 

This product extends the ISW and ISWO series thresholds 

to 7 1/4” and it extends the ISCS series threshold 

to 6 9/16” 

Options: 


EXTQOSR 

This extends the QOSR series threshold to 6 9/16” 

Options: 

Mill Finish 

20 


(813) 971-4700 • (800) 966-7753 • Fax: (813) 977-5632

formulated

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?