Pipe Hangers & Supports

More documents

Recommendations

Info

CPVC PIPE HANGERS Fig. 187 Two Hole 90˚ Side Mount Strap Size Range: 3 ⁄4" through 2" Finish: Zinc Plated Steel (Hot-Dip Galvanized optional) Service: Hanger for CPVC pipe in the horizontal position on the bottom of structural wood beams and Steel 20 Ga. (min.) (Fig. A). Can be used as a restrainer, only in Steel 20 Ga. (min) (Fig. B). During installation, adjust hanger mounting flanges such that pipe contacts both mounting surface and hanger, minimizing vertical pipe movement. Approvals: UL and ULC Listed. Installation: • Snap hanger over pipe. • Secure hanger to mounting surface with screws provided. • Do not anchor tightly to mounting surface. Pipe must be allowed to move freely through hanger. • Steel applications require two (2) #14 x 1" hex washer head self-drilling TEK screws. Not Supplied. Part Number STD-0090. Features: • Beveled edge design helps protect the CPVC pipe from any rough surface. • Easily attaches to wood structure with #10 x 1" hex washer head self threading screw supplied with product. No pre-drilling required. Ordering: Specify CPVC pipe size, figure number and description. Fig. A Fig. B CPVC Pipe Size FIG. 187: WEIGHT (LBS) • DIMENSIONS (IN) A B øC E F Max. Hanger Spacing (FT.) Approx. Weight/100 (lbs) 3 ⁄4 1 1 1 ⁄2 1 ⁄4 1 1 ⁄8 2 3 ⁄4 5 1 ⁄2 5 1 1 1 ⁄8 1 1 ⁄2 1 ⁄4 1 1 ⁄8 2 13 ⁄16 6 6 1 1 ⁄4 1 5 ⁄16 1 3 ⁄4 1 ⁄4 1 1 ⁄8 3 1 ⁄4 6 1 ⁄2 7 1 1 ⁄2 1 1 ⁄2 1 7 ⁄8 1 ⁄4 1 1 ⁄8 3 1 ⁄2 7 8 2 1 3 ⁄4 2 1 ⁄4 1 1 ⁄8 3 7 ⁄8 8 9 34 PH-1.15 www.anvilintl.com
CPVC PIPE HANGERS Fig. 188 Size Range: 3 ⁄4" through 2" Finish: Zinc Plated Steel (Hot-Dip Galvanized optional) Service: Support for CPVC pipe off the face of structural wood beams (Fig. A) eliminates the use of back-up blocks. It can also be used as a hanger for CPVC pipe in the horizontal position on the bottom of structural wood beams and Steel 20 Ga. (min.) (Fig. B). Approvals: UL and ULC Listed. Installation: • Snap hanger over pipe. • Position hanger back around pipe but allow for pipe movement. • Secure hanger to mounting surface with screws provided. Recheck to insure that the pipe is allowed to move freely through hanger. • Steel applications require two (2) #14 x 1" hex washer head self-drilling TEK screws. Not Supplied. Part Number STD-0090. Features: • Beveled edge design helps protect the CPVC pipe from any rough surface. • Easily attaches to wood structure with #10 x 1" hex washer head self threading screw supplied with product. No pre-drilling required. • Eliminates wooden spacer blocks. Ordering: Specify CPVC pipe size, figure number and description. Two Hole Stand Off Strap Ceiling Plates & Flanges Table of Contents General Notes Copper Tubing Hangers Pipe Rings Clevis Hangers Steel Pipe Clamps Socket Clamps Brackets Structural Attachments Stainless Steel Hangers Beam Clamps CPVC Pipe Hangers Fig. A Fig. B Concrete Inserts & Attachments CPVC Pipe Size FIG. 188: WEIGHT (LBS) • DIMENSIONS (IN) A B øC E F 3 ⁄4 1 5 ⁄16 3 1 ⁄4 1 1 3 ⁄8 3 3 ⁄8 1 1 ⁄4 1 1 ⁄2 3 11 ⁄16 1 1 ⁄2 1 7 ⁄8 4 3 ⁄8 2 2 4 1 ⁄2 Max. Hanger Spacing (FT.) Approx. Weight/100 (lbs) 1 ⁄4 1 1 ⁄8 2 3 ⁄4 5 1 ⁄2 5 1 ⁄4 1 1 ⁄8 3 6 6 1 ⁄4 1 1 ⁄8 3 5 ⁄16 6 1 ⁄2 7 1 ⁄4 1 1 ⁄8 3 9 ⁄16 7 8 1 ⁄4 1 1 ⁄8 4 1 ⁄8 8 9 Hanger Rods Rod Attachments Bolts, Nuts, Pins & U-Bolts www.anvilintl.com 35 PH-1.15
Page 1 and 2: Pipe Hangers & Supports www.anvilin
Page 3 and 4: Pipe Hangers and Supports Manufactu
Page 5 and 6: TABLE OF CONTENTS Hanger Rods throu
Page 7 and 8: PICTORIAL TABLE OF CONTENTS Copper
Page 9 and 10: PICTORIAL TABLE OF CONTENTS Socket
Page 11 and 12: PICTORIAL TABLE OF CONTENTS Hanger
Page 13 and 14: PICTORIAL TABLE OF CONTENTS Pipe Ro
Page 15 and 16: PICTORIAL TABLE OF CONTENTS Spring
Page 17 and 18: GENERAL NOTES Standard Galvanizing
Page 19 and 20: GENERAL NOTES Bolts, Nuts, Pins & U
Page 21 and 22: COPPER TUBING HANGERS Fig. CT-65 Li
Page 23 and 24: COPPER TUBING HANGERS Fig. 69F Adju
Page 25 and 26: COPPER TUBING HANGERS Fig. CT-121 S
Page 27 and 28: COPPER TUBING HANGERS Fig. CT-255 C
Page 29 and 30: STAINLESS STEEL HANGERS Fig. 260SS
Page 31 and 32: STAINLESS STEEL HANGERS Fig. 590SS
Page 33: CPVC PIPE HANGERS Fig. 186 Two Hole
Page 37 and 38: PIPE RINGS Fig. 138R (Rod Threaded)
Page 39 and 40: PIPE RINGS Fig. 69 Adjustable Swive
Page 41 and 42: CLEVIS HANGERS Fig. 65 Size Range:
Page 43 and 44: CLEVIS HANGERS Fig. 260 ISS Clevis
Page 45 and 46: CLEVIS HANGERS Fig. 260 ISS Clevis
Page 47 and 48: CLEVIS HANGERS Fig. 590 Adjustable
Page 49 and 50: STEEL PIPE CLAMPS Fig. 40 Riser Cla
Page 51 and 52: STEEL PIPE CLAMPS Fig. 212 Medium P
Page 53 and 54: STEEL PIPE CLAMPS Fig. 216 Size Ran
Page 55 and 56: STEEL PIPE CLAMPS Fig. 295A Alloy D
Page 57 and 58: STEEL PIPE CLAMPS Fig. 224 Fig. 246
Page 59 and 60: SOCKET CLAMPS Fig. 600 Socket Clamp
Page 61 and 62: BEAM CLAMPS Fig. 95 Size Range: 3
Page 63 and 64: BEAM CLAMPS Fig. 92 Universal C-typ
Page 65 and 66: BEAM CLAMPS Fig. 94 Wide Throat Top
Page 67 and 68: A BEAM CLAMPS Fig. 14 Size Range:
Page 69 and 70: BEAM CLAMPS Fig. 218 Malleable Beam
Page 71 and 72: BEAM CLAMPS Fig. 292: Right-Hand Th
Page 73 and 74: STRUCTURAL ATTACHMENTS Fig. 54 Size
Page 75 and 76: A STRUCTURAL ATTACHMENTS Fig. 60 Si
Page 77 and 78: BRACKETS Fig. 202 Size Range: 3
Page 79 and 80: BRACKETS Fig. 189 Size: 3 ⁄8" Ma
Page 81 and 82: BRACKETS Fig. 194 Material: Carbon
Page 83 and 84: BRACKETS Fig. 199 Heavy Welded Stee
Page 85 and 86:
CEILING PLATES AND FLANGES Fig. 128
Page 87 and 88:
CONCRETE INSERTS & ATTACHMENTS Fig.
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
HANGER RODS Fig. 140:Right-hand Thr
Page 99 and 100:
T H HANGER RODS Fig. 148 Size Range
Page 101 and 102:
ROD ATTACHMENTS Fig. 114 Turnbuckle
Page 103 and 104:
ROD ATTACHMENTS Fig. 299 Forged Ste
Page 105 and 106:
BOLTS, NUTS, PINS & U-BOLTS Fig. 29
Page 107 and 108:
BOLTS, NUTS, PINS & U-BOLTS Fig. 13
Page 109 and 110:
STRAPS Fig. 262 Strap Short Straps
Page 111 and 112:
PIPE SUPPORTS Fig. 62, Type A, B an
Page 113 and 114:
PIPE SUPPORTS Fig. 192 Adjustable P
Page 115 and 116:
PIPE SUPPORTS Fig. 264 Adjustable P
Page 117 and 118:
PIPE SUPPORTS Fig. 259 Pipe Saddle
Page 119 and 120:
TRAPEZE Fig. 45 Material: Carbon st
Page 121 and 122:
PIPE SHIELDS & SADDLES Fig. 167 Ins
Page 123 and 124:
PIPE SHIELDS & SADDLES Pipe Coverin
Page 125 and 126:
PIPE SHIELDS & SADDLES Fig. 160 to
Page 127 and 128:
PIPE ROLL Fig. 177 Adjustable Pipe
Page 129 and 130:
PIPE ROLL Fig. 178 Spring Cushion H
Page 131 and 132:
PIPE ROLL Fig. 175 Roller Chair Str
Page 133 and 134:
PIPE ROLL Fig. 271: Complete Pipe R
Page 135 and 136:
PIPE ROLL Fig. 76CP Non-Conductive
Page 137 and 138:
PIPE GUIDES & SLIDES Fig. 255 Pipe
Page 139 and 140:
PIPE GUIDES & SLIDES Fig. 256 Pipe
Page 141 and 142:
PIPE GUIDES & SLIDES PTFE Pipe Slid
Page 143 and 144:
PIPE GUIDES & SLIDES Fig. 257 and 4
Page 145 and 146:
PIPE GUIDES & SLIDES Fig. 439 Struc
Page 147 and 148:
PIPE GUIDES & SLIDESPIPE GUIDES & S
Page 149 and 150:
SWAY BRACE - SEISMIC Fig. 770 Q Bra
Page 151 and 152:
SWAY BRACE - SEISMIC Fig. 776 Brace
Page 153 and 154:
SWAY BRACE - SEISMIC Fig. 775 Later
Page 155 and 156:
SWAY BRACE - SEISMIC Fig. 778 Bar J
Page 157 and 158:
SWAY BRACE - SEISMIC Fig. 772 Adjus
Page 159 and 160:
SWAY BRACE - SEISMIC Fig. 779 Multi
Page 161 and 162:
SWAY BRACE - SEISMIC Fig. 777 Swive
Page 163 and 164:
SWAY BRACE - SEISMIC Fig. 771 Y Soc
Page 165 and 166:
SPRING HANGERS Fig. 82, Fig. B-268,
Page 167 and 168:
SPRING HANGERS Spring Hanger Size a
Page 169 and 170:
SPRING HANGERS Fig. B-268, C-268 Sp
Page 171 and 172:
SPRING HANGERS Fig. B-268, C-268 Sp
Page 173 and 174:
SPRING HANGERS Fig. B-268, Fig. C-2
Page 175 and 176:
SPRING HANGERS Hanger Size Rod Size
Page 177 and 178:
SPRING HANGERS Hanger Size Rod Size
Page 179 and 180:
SPRING HANGERS Triple Spring, Tripl
Page 181 and 182:
SPRING HANGERS Quadruple Spring, Qu
Page 183 and 184:
CONSTANT SUPPORTS Model R Fig. 80-V
Page 185 and 186:
CONSTANT SUPPORTS Model R (Continue
Page 187 and 188:
CONSTANT SUPPORTS Table Continued o
Page 189 and 190:
CONSTANT SUPPORTS Table Continued o
Page 191 and 192:
M CONSTANT SUPPORTS Fig. 80-V Type
Page 193 and 194:
M CONSTANT SUPPORTS Fig. 80-V Type
Page 195 and 196:
CONSTANT SUPPORTS Fig. 80-V Type F
Page 197 and 198:
CONSTANT SUPPORTS Fig. 80-V Types A
Page 199 and 200:
CONSTANT SUPPORTS Fig. 81-H Type B
Page 201 and 202:
CONSTANT SUPPORTS Fig. 81-H Type D
Page 203 and 204:
CONSTANT SUPPORTS Fig. 81-H Type F
Page 205 and 206:
CONSTANT SUPPORTS Fig. 80-V and 81-
Page 207 and 208:
Fig. 170 HORIZONTAL CONSTANT SUPPOR
Page 209 and 210:
VIBRATION CONTROL & SWAY BRACE Fig.
Page 211 and 212:
SWAY STRUT ASSEMBLY Fig. 211, Fig.
Page 213 and 214:
SWAY STRUT ASSEMBLY Fig. 222, C-222
Page 215 and 216:
SWAY STRUT ASSEMBLY Sway Strut Chec
Page 217 and 218:
SNUBBERS Fig. 3306 Fig. 3307: with
Page 219 and 220:
SNUBBERS Fig. 3306 Fig. 3307: with
Page 221 and 222:
SNUBBERS Fig. 200, Fig. 201 Hydraul
Page 223 and 224:
SNUBBERS Fig. 200, Fig. 201 Hydraul
Page 225 and 226:
SPECIAL DESIGN PRODUCTS Fig. 38 SD
Page 227 and 228:
SPECIAL DESIGN PRODUCTS Fig. 40 SD
Page 229 and 230:
APPLICATION ASSEMBLY EXAMPLES Const
Page 231 and 232:
APPLICATION ASSEMBLY EXAMPLES Sprin
Page 233 and 234:
APPLICATION ASSEMBLY EXAMPLES Rigid
Page 235 and 236:
APPLICATION ASSEMBLY EXAMPLES Rigid
Page 237 and 238:
TECHNICAL DATA Pipe Hanger Specific
Page 239 and 240:
TECHNICAL DATA Master Format 3 Part
Page 241 and 242:
TECHNICAL DATA Pipe Support Spacing
Page 243 and 244:
TECHNICAL DATA Pipe Data - Steel Sc
Page 245 and 246:
TECHNICAL DATA PVC Plastic Pipe Dat
Page 247 and 248:
TECHNICAL DATA Thermal Expansion of
Page 249 and 250:
TECHNICAL DATA Beam Dimensions Stra
Page 251 and 252:
ANVIL COMPLIANCES, LISTINGS AND APP
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
ANVIL TERMS OF SALE AND CONDITIONS
Page 259 and 260:
INDEX Fig. 14 through Fig. 217 Figu
Page 261 and 262:
INDEX Section Index Anvil Complianc
Page 263 and 264:
NOTES www.anvilintl.com 263
Page 265 and 266:
NOTES www.anvilintl.com 265
Page 267 and 268:
BRANDS OF ANVIL INTERNATIONAL Anvil
show all

Pipe Hangers & Supports

Create successful ePaper yourself

Delete template?

Save as template?