Wiring Accessories

More documents

Recommendations

Info

FINAL CAT_Layout 1 08/02/2011 17:45 Page 147 Fire Protection & Emergency Lighting | Channel u AlarmSense ® Two Wire Fire Panel AlarmSense ® Panel AlarmSense ® AlarmSense A1R Heat Sounder Detector Beacon ® The Two Wire fire panel which gives less expensive and more flexible installation options. Most conventional fire systems are designed to work with two pairs of wires per zone: one pair for detection devices such as smoke detectors, heat detectors and manual call points; the other for alarm devices such as bells, sounders or strobes. By using different voltage bands for quiescent ® and alarm states, AlarmSense components can be connected to the same pair of supply wires. When powered and controlled by the AlarmSense ® two-wire fire panel, this reliable technology takes all the complexity out of fire alarm system design, leading to quicker, less expensive and more flexible installation. Research shows an AlarmSense ® two-wire system can achieve up to 40% reduction of labour over a standard four wire conventional system. Compliant with EN54 Parts 2 and 4; installer friendly design; easy first fix and straight forward maintenance. Flush or surface mountable. Full details on our website at www.channelsafety.co.uk. u HARK Disabled Toilet Alarm An easy to install and expand solution to meet the growing requirement for a means of indicating that assistance is required. HARK assists with compliance with the DDA, BS8300 & other care standards. HARK Features Sounder within the reset unit to give audible reassurance that assistance is on the way. Braille text on the reset unit. Only 3 points to install on a standard system. Can be simply linked to other systems. Assists in ensuring compliance with the DDA, BS8300 & other care standards. Simple to expand. Multi-way remote indicator units available. Twin pull cord rings supplied. Disabled Persons sticker supplied. Operation Once the pull cord(s) are activated the reassurance LED on the pull cord will illuminate, the reset unit will iluminate & operate its internal sounder and the external lamp/sounder unti will operate along with any optional equipment installed. Simply pressing the illuminated reset switch will return the system to the ‘normal’ state. www.bemco.co.uk 147
FINAL CAT_Layout 1 08/02/2011 17:45 Page 148 Fire Protection & Emergency Lighting | Channel u FOREST Long Life LED Exit Sign u BROOK 3 Hour Maintained - 50xLED Fitting u GLEN 3 Hour Maintained - 50xLED Fitting u METEOR 8W 3 Hour Illuminaire IP65 Weatherproof u GROVE LED Twin Flood Emergency Light The Forest utilizes the latest long life LED technology to offer a high quality yet cost effective low profile exit sign. Self test as standard Long life LED technology 8mm high quality blade 36m viewing distance 3 hour back-up 3-year guarantee Double sided legend State legend requirements (AL, AR or AD) The Brook LED Light Ingress Protected to IP 65 utilises 50 Led’s with a running Poly Carbonate Diffuser and Body wattage of 14W per fitting Hinged geartray for easy installation Cable entry is available on Available in Maintained version the rear and on each end but can be used as a and side of the fitting Non-Maintained fitting The Glen LED fitting provides substantial energy savings compared to a conventional 8 watt emergency light. The fact that the LED will last the equivalent of 12 x 8w tube lifetimes means that considerable maintenance savings are made over the lifetime of the fitting, this also leads to far less environmental impact in both energy use and waste materials (tubes). LED life better than Auto monthly and annual self test 50,000 RUNNING HOURS function to the requirements of BS5266 The Glen LED Light utilises Simple 'plug & go installation 1x 1watt LED Unobtrusive design Designed to fit through Maintained or non maintained a 50–55mm hole operation (selectable by wiring input) Incorporates 4.8v Battery conditioning cycle 2Ah NiMh battery to ensure maximum battery life Low environmental impact! The new & improved Meteor Emergency Luminaire offers a cost effective solution for emergency lighting, without compromising quality. The optically enhanced diffuser produces evenly directed light distribution giving greater flexibility for design of lighting schemes. Designed for easy installation, with snap fit gear tray and diffuser. Cable entry is available on the rear and on each end of the fitting, giving standard BEESA box and through conduit options. Optional accessories ensure that the Meteor can be used in most lighting schemes. 8W, 3 hour luminaire Economically price IP65 weatherproof 18 metre viewing distance (with legend) 1 year guarantee Available in 110V AC version The Grove IP65 is an advanced 3 hour non-maintained LED twin flood emergency light. Latest LED technology IP65 2 x 60 Led lamps Can be mounted with the lamps top or bottom 3 hour non maintained operation Excellent spacing distances 50,000 running hour LED life Light weight 12V 2.2Ah Nicad battery pack Over charge & deep discharge protection 148 The British Electrical & Manufacturing Company Ltd.
Page 1 and 2:
FINAL CAT_Layout 1 08/02/2011 17:23
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90: FINAL CAT_Layout 1 08/02/2011 17:37
Page 139: FINAL CAT_Layout 1 08/02/2011 17:45
show all

Wiring Accessories

Create successful ePaper yourself

Delete template?

Save as template?