providence®
PRO - Architectural Area Lighting
PRO - Architectural Area Lighting
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Specifications<br />
Family<br />
Providence ®<br />
Medium<br />
Luminaire<br />
Code<br />
Distribution<br />
Type<br />
LED<br />
Configuration*<br />
Wattage<br />
Consumption<br />
Lumen<br />
Output<br />
Lumens<br />
per Watt<br />
PROV-T3 3 60LED-BW 70 2790 40 5100K<br />
PROV-T5 5 60LED-BW 70 2892 41 5100K<br />
CCT<br />
* Driven at 350mA<br />
HOUSING<br />
FINISH<br />
The upper lamp housing shall be die-cast The finish consists of a five stage pretreatment regimen<br />
aluminum. The internal reflector module is with a polymer primer sealer, oven dry off, and top coated<br />
sealed from the outer housing with a onepiece,<br />
memory retentive, molded silicone finish. The finish shall meet the AAMA 605.2 performance<br />
with a thermoset super TGIC polyester powder coat<br />
gasket. The tempered glass lens shall be specification which includes passing a 3000 hour salt<br />
sealed to the housing with a silicone gasket. spray test for corrosion resistance.<br />
One stainless steel latch shall release the door. Certification<br />
ELECTRICAL Fixture shall be listed with ETL for outdoor, wet location<br />
120 thru 277 volt. All electrical components are use, UL1598 and Canadian CSA Std. C22.2 no.250.<br />
mounted directly to the driver tray for maximum IP=55.<br />
heat dissipation. LED constant current driver Warranty<br />
operates at 350mA.<br />
Providence LED is warranted for five years<br />
MICROEMITTER including housing, LEDs, and electrical<br />
Precision injection molded, highly specular components. Any unauthorized return, repair,<br />
reflectors are positioned to achieve directional control replacement or modification of the Product(s)<br />
toward desired task for IES cutoff classification. shall void this warranty. This warranty applies<br />
Secondary reflectors with a concave, specular medium only to the use of the Product(s) as intended<br />
hammertone finish are used to redirect light downward. by AAL and does not cover poles, arms,<br />
No fasteners are placed on the reflective surface. The mounting, or any misapplication or misuse<br />
entire assembly fastens to the housing as a one-piece of said Product(s), or installation in<br />
module and features wiring quick-connects for easy hazardous or corrosive environments.<br />
installation. Standard color temperatures are 3500K and Contact AAL for complete warranty<br />
5100K. Other temperatures available. Please contact language, exceptions, and limitations.<br />
factory. MicroEmitters are individually field replaceable.<br />
5 YEAR WARRANTY<br />
MOUNTING<br />
The PROV is factory supplied as a complete, pre-wired<br />
assembly. The PROV fitter shall slip over a 4"/100mm open<br />
top pole or arm and secured and leveled with 3 stainless<br />
steel set screws.<br />
Providence ®<br />
LED<br />
13
Change language