and Accessories

and Accessories 

Arms 

Contemporary Arms 

Period Arms 

Poles 

Aluminum Poles 

Decorative Poles 

Multi-Post Poles 

Accessories 

Banner Arms 

Egress 

Photocells 

Other 

A R C H I T E C T U R A L A R E A L I G H T I N G 

Architectural Area Lighting 1

“to create, inspire and nurture 

EXCELLENCE in each other” 

LONGEVITY 

AAL manufactures its products 

to have a life span as long as 

the buildings and spaces they 

illuminate. The primary material 

used for all our products is 

aluminum to resist corrosion 

and the need for maintenance. 

Aluminum will not need the 

periodic refinishing required of 

steel products that will eventually 

rust and corrode. All our internal 

parts and fasteners are made of 

aluminum or stainless steel. 

SUSTAINABILITY 

AAL develops our products 

with recycling and resource 

management in mind. We 

recycle all incoming packaging 

materials. Our state-of-the-art 

finishing system uses eco-friendly 

cleansing and preparation 

chemicals that are harmless 

enough to send to the drain 

without further processing. Finally, 

AAL makes all products with 

renewable materials such as 

aluminum and stainless steel. 

Contents 

Breadth of Product 4 

Efficient, Effective, Environmentally Friendly 5 

Period Style Arm Mounted Luminaires 6 

Contemporary Style Arm Mounted Luminaires 7 

How to Use This Guide 8 

Period Arms 10 

Design Excellence 12 

Arm Matrix 14 

Contemporary Arms 34 

Design Excellence 36 

Arm Matrix 38 

Poles 60 

Aluminum Poles 62 

Base Covers 69 

Decorative Base Poles 70 

Multi-Post Poles 81 

Pole Options/Accessories 86 

Photocell/Egress 87 

Photocells/Other Accessories 88 

Banner Arms 89 

Finishes 90 

CodeLink SM 

Arms Spec Sheet Poles Spec Sheet Accessories Spec 

Sheet 

PATENTS PENDING 

Printed on recycled paper 

©2012 Architectural Area Lighting 

MADE IN 

USA 

2 

POLES/ARMS/ACCESSORIES

PRM3-TRA35D-DB2 


Breadth of Product 

Whether you are creating a traditional or contemporary site 

theme, AAL offers a complete fixture family package. AAL’s 

fixture + arm + pole + matching bollard, can be specified in 

multiple configurations and elevated scales throughout the 

site. 

Traditional decorative arm and pole with towne commons 

AAL products are designed for easy installation and 

routine maintenance. Product features include tool-less 

access to the lamp and ballast as well as pre-wired arms 

and multi-post poles. 

Long curve arm with flex 

Decorative pole 

multi-post pole 

4 


Efficient • Effective • 

EnvirONMENTALLY Friendly 

AAL manufactures all its products to have a life span as long as the buildings or spaces 

they illuminate. AAL’s precision optical systems put light where it is needed resulting in 

the lowest amount of energy being consumed. AAL offers dark sky friendly versions for 

controlling light pollution and glare. 

TM 

1 2 3 

1. PARkway square 

2. providence ® 

3. promenade 

4. universe ® 

5. largent 

6. flex 

4 5 6 

PROV LED 

PRMN LED 


Period Style Luminaires 

Parkway Square, part of AAL’s Designer SSL Series, is a 

masterpiece of advanced design and innovation, capturing all 

the best of AAL. Featuring distinctive design elements and our 

newest technology, Parkway Square is available in two luminaire 

sizes for pole or wall mounting, and along with a matching 

bollard, provides an all new, whole-site package of luminaires. 

Providence ® — Transitional style fixtures that combine modern 

lighting performance with aesthetics in traditional forms. Part 

of AAL's Designer SSL Series. Available in 3 sizes, as well as a 

matching wall sconce and bollard. 

Arts & Crafts ® — A family of fixtures that reflects the style and 

warmth of the Craftsman era. Available in two sizes as well as 

a matching bollard. Features a wide variety of shade materials 

and finishes. 

Civic Lantern — An elegantly proportioned coach lantern that 

features a one-piece clear acrylic light chamber that can house 

either the patented Moldcast Pericline vertical optical system or 

AAL horizontal optics. 

Dundee — A high performance, decorative outdoor luminaire. 

Provides more footcandles on the ground than typical decorative 

fixtures, allowing wider pole spacing and lower wattage lamps. 

Federal Globe — High performing, precision optics in an 

elegant and timeless traditional acorn form. Features the 

patented Moldcast ContraCline ® optical system. 

Promenade Series — A traditional style family that provides 

state-of-the-art, focused optical systems so light may be 

precisely aimed, resulting in smooth, even illumination of the 

environment. 

Towne Commons ® — Available in a wide range of sizes and 

configurations featuring a precision reflector system that 

minimizes light pollution while providing a superior lighting 

system for illuminating streets and pedestrian areas. 

6 


Contemporary Style LUMINAIRES 

Universe Collection ® — A complete family of decorative, yet highly 

functional luminaires that transcend architectural styles past and present. 

Part of AAL's Designer SSL Series. The fixtures are scaled in three sizes 

with a matching bollard. 

Cubic Indirect — With its angular design and stainless steel vertical 

struts, the Cubic Indirect is a perfect complement to the rectilinear and 

angular compositions of modern architecture. The Cubic Indirect is 

available with highly efficient LEDs, and is perfect for projects that require 

a sense of mood as much as a sense of light. 

Diretto ® — The contemporary styling of Diretto redefines the visual 

language of contemporary fixtures. The lamp and ballast module’s unique 

design have no flat surfaces and are unified by stainless steel struts. 

Sustainability features include tool-less servicing with efficient lamp and 

electronic ballast options. 

Flex — The patented contemporary design of Flex provides greater 

operating efficacy, while the multiple arm designs and mounting options 

form a versatile “create it yourself” look. Available with single, double, triple 

or quad mount configuration. 

Indirect — Combines contemporary styling with soft, low brightness 

illumination. Available in a fixed or adjustable head with round or square 

reflector, and highly efficient LED technology. Post and wall mount options 

are available. 

Largent — A geometric design using state-of-the-art optical systems 

to precisely light streets, parks and pedestrian venues. Part of AAL's 

Designer SSL Series. Available with stacked louvers, diffused lens or a 

horizontal reflector system. 

Pericline — This geometrically shaped luminaire features the patented 

Moldcast high performance optical system. Available in two sizes with 

either a cylindrical or rectilinear housing, is also available as a wall or pole 

mount fixture. 

Perspect — Nautical inspired design theme combines a classic look 

with modern optics. Available with a lightly diffused lens or a frosted dome 

for a soft glow when illuminated. 

Spectra — Offers the freedom to specify size, finish and optics to 

complement any design scheme. Available in three sizes for post or wall 

mounting, as well as a matching bollard. 


How to Use This Guide 

Creating the look you desire is simple with this 

Product Selection Guide. Explore the wide range of 

options available and then choose the arm, pole, 

base, accessories and finish that best suits the 

project and fixture you desire. The breadth of AAL’s 

arm, pole and options provides a wide selection 

that will complement architectural details and site 

design themes. 

Follow These Easy Steps: 

1. Choose a contemporary or traditional styled fixture. 

2. Select mounting and an arm, if desired, that 

complements the fixture and site theme. 

3. Select the complementing pole. 

4. Make the look your own by adding stylish and 

functional options, accessories and finishes. 

1. CHoose a luminaire 

PERIOD 

Period 

Parkway Square Providence ® Arts & Crafts ® Civic Lantern 

Dundee Federal Globe Promenade Towne Commons ® 

Contemporary 

Parkway Square Universe ® Cubic Indirect Diretto ® Flex /miniFlex 

Indirect Largent Pericline Spectra Spheres 

Mitre 

20.5 in 

520 

1 

mm 

in 

8 


2. Select a Mount and Arm 

Period 

Contemporary 

Wall Mount Pole Mount Wall Mount Pole Mount 

3. Select a Pole and base cover 

Aluminum Base Cover Decorative Base Series Multi-Post 

(For Aluminum pole only) 

4. Select Options/Accessories 

Egress Photocell Banner Arms Ladder Rest / 

Plant Hangers 

5. COLOR 

All standard and premium AAL colors available. For RAL and custom colors, please submit a 

four-digit RAL number or color chip for custom colors. 

Standard Color 

Premium Color 

AWT 

Arctic White 

DGN 

Dark Green 

SFM 

Seafoam 

LGY 

Light Gray 

CRT 

Corten 

WCP 

Weathered Copper 

MAL 

Matte Aluminum 

BRM 

Metallic Bronze 

SHK 

Shamrock 

MDG 

Medium Gray 

DBZ 

Dark Bronze 

SPP 

Salt & Pepper 

ATG 

Antique Green 

BLK 

Black 

VBL 

Verde Blue 

MTB 

Matte Black 

WRZ 

Weathered Bronze 

Contact a local representative for a color chip. 


Period LUMINAIRE 

Arm Selections 

All arm castings are cast from pure, certified 

#356 aluminum for maximum strength and 

structural integrity. 

Wall mount 

Fixtures are either welded to the arm or bolted 

on, depending on the selection. Custom 

and modified arms are available in many 

configurations. 

Pole mount 

ACRD-WMTP 

PROS-WMA59U 

10 


Specify the 

Best 

AAL traditional cast aluminum arms are 

unitized one piece designs for maximum 

strength. The arms are prewired for 

cost effective installation. Stainless steel 

mounting hardware is supplied for attaching 

to AAL poles. 

PROV-TRA57 

PRMS-TRA5U 

ALN540-TRA55 


Period LUMINAIRE arms 

Design Excellence 

PRM3-TRA35D 

Visual resolve 

Standard finial completes period look 

Low profile hardware 

Secure connection of 

arm and fixture 

Prewired cast arm makes 

installation easy 

For wall mounted arms the 

hardware is provided by the 

contractor. 

For pole mounted arms 

the hardware is proved for 

attachment to AAL poles. 

12 


ALL ARMS ARE 

notCREATED 

EQUAL 

Accept No Imitations 

AAL arms are factory fabricated and assembled 

for maximum strength and rigidity. All components 

are welded together as a unitized structure. All 

arms are prewired for easy, error proof installation 

with no field assembly required. AAL poles are 

factory drilled with threaded inserts (stainless steel 

hardware). Minimize the cost of installation and 

guarantee a great looking finished project with 

AAL arms. 

ALN-TRA5U 

PRMD-TRA9 

PRM2-TRA60 


Period LUMINAIRE Arm Matrix 

Wall Mount 

ALN438W-WMA1L WMA1M Wt: 12 lbs 

5 1/2" 

138mm 

15 3/4" 

394mm 

25 1/2" 

638mm 

16" 

400mm 

8" 

200mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

8" 

200mm 

ARTS & CRAFTS ® TOWNE COMMONS ® 

PRMN 

ALN438* 

ACSQ 

available with: 

CIvic lantern 

Dundee 

federal gLobe 

Promenade 

Towne commons 

WMA1L 

CLL 

ALN610 

FGS 

PRMS, PRMN, PRM3-PM 

ALN440, ALN445, ALN540PM 

Wt: 14 lbs 

ACRD 

PRMS 

ALN440 

5 1/2" 

138mm 

18 1/2" 

463mm 

SACSQ 

PRMD 

ALN445 

25 1/2" 

638mm 

8" 

200mm 

16" 

400mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

PRM2 

8" 

200mm 

SACRD 

PROMENADE 

*Arms for Arts & 

ALN540PM 

PRM3 

Crafts are custom 

*Arms for ALN438 

designed 

are custom 

CIVIC LANTERN DUNDEE 

PRM4 

PROVIDENCE ® 


CIvic lantern 

Dundee 

federal gLobe 

Promenade 

Towne commons 

WMA2M 

CLL 

ALN610 

FGS 



Wt: 12 lbs 

CLL 

FEDERAL GLOBE 

PROL 

ALN610 

PARKWAY SQUARE 

25 1/2" 

638mm 

16" 

400mm 

5 1/2" 

138mm 

3/4" 

19mm 

WIREWAY 

15 3/4" 

394mm 

FGS 

PROV 

PKWM 

8" 

200mm 

8" 

200mm 

7/16" 

11mm 

4-PLC 

11" 

275mm 

14 

FGL 

PROS* 

*Arms for PROS 

are custom 

designed 

POLES/ARMS/ACCESSORIES 

PKWS 

*Arms for PKWS and 

PKWM are custom 


Promenade 

Towne commons 

PRMD, PRM2, PRM4 

ALN440D, ALN445D, ALN540D

WMA2L 

Wt: 14 lbs 

WMA3 

Wt: 17 lbs 

5 1/2" 

138mm 

18 1/2" 

463mm 

5.5" 

140mm 

20" 

508 mm 

25 1/2" 

638mm 

8" 

200mm 

16" 

400mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

10 3/4" 

269mm 

25.5" 

648 mm 

16" 

406 mm 

8" 

200mm 

8" 

203 mm 


Promenade 

Towne commons 


ALN440D, ALN445D, ALN540D 


Dundee 

Promenade 

Towne commons 

ALN610 

PRMN, PRMS 


WMA35D 

Wt: 12 lbs 

WMA35U 

Wt: 12 lbs 

14" 

350mm 

6 5/8" 

166mm 

8" 

200mm 

7" 

175mm 

3/4" 

19mm 

WIREWAY 

20" 

500mm 

13 1/2" 

338mm 

14" 

350mm 

6 5/8" 

166mm 

8" 

200mm 

7" 

175mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

20" 

500mm 

7/16" 

11mm 

4-PLC 


Promenade 

PRMD, PRM2, PRM3, PRM4 


Dundee 

Promenade 

Towne commons 

ALN610 



WMA36D 

Wt: 12 lbs 

WMA36U 

Wt: 12 lbs 

14" 

350mm 

6 5/8" 

166mm 

8" 

200mm 

7" 

175mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

20" 

500mm 

14" 

350mm 

6 5/8" 

166mm 

8" 

200mm 

7" 

175mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

20" 

500mm 


Promenade 



Dundee 

Promenade 

Towne commons 

ALN610 





Wall Mount 

PRM3-WMA4 

WMA37 

Wt: 12 lbs 

26 1/4" 

656mm 

5 1/2" 

138mm 

25 1/2" 

638mm 

16" 

400mm 

8" 

200mm 

8" 

200mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

21" 

525mm 



Promenade 

Towne commons 

PRMD, PRM2, PRM3, pRM4 


ACSQ 

PRMN 

ALN438* 

WMA38 

Wt: 12 lbs 

ACRD 

PRMS 

ALN440 

SACSQ 

SACRD 

PRMD 

PRM2 

ALN445 

PROMENADE 


ALN540PM 

PRM3 



designed 

are custom 


PRM4 

26" 

650mm 

23" 

575mm 


Promenade 

Towne commons 

6" 

150mm 

4" 

100mm 

5" 

125mm 

3/4" 

18mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

30" 

750mm 

PRMD, PRM2, PRM3, pRM4 


PROVIDENCE ® 

WMA39 

Wt: 14 lbs 

CLL 


PROL 

ALN610 


5 1/2" 

138mm 

26 1/4" 

656mm 

FGS 

PROV 

PKWM 

25 1/2" 

638mm 

16" 

400mm 

8" 

200mm 

8" 

200mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

39" 

975mm 

21" 

525mm 

16 

FGL 

PROS* 


are custom 

designed 


PKWS 




Promenade 

Towne commons 

PRM2, PRM4, PRMD 


WMA4 

Wt: 12 lbs 

WMA55 

Wt: 10 lbs 

25 1/2" 

638mm 

16" 

400mm 

5 1/2" 

138mm 

5 3/4" 

144mm 

3/4" 

19mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

22 3/4" 

569mm 

10 3/4" 

269mm 

9 3/4" 

244mm 

25 1/2" 

638mm 

16" 

400mm 

5 1/2" 

138mm 

9 1/2" 

238mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

21 1/4" 

531mm 

8" 

200mm 

8" 

200mm 


Promenade 

Towne commons 




CIvic lantern 

Dundee 

federal gLobe 

Promenade 

Providence 

Towne commons 

CLL 

ALN610 

FGS 


PROV, PROL 


WMA56 

Wt: 10 lbs 

WMA57 

Wt: 9 lbs 

7 1/8" 

178mm 

16" 

400mm 

6.88" 

175mm 

12.5" 

318mm 

19 3/4" 

494mm 

13 13/16" 

345mm 

7/16" 

11mm 

2-PLC 

18.0" 

460mm 

11.25" 

286mm 

3 1/2" 

88mm 

1" 

25mm 

WIREWAY 

.44"/11mm WIREWAY HOLE 

.75"/18mm 


CIvic lantern 

Dundee 

federal gLobe 

Promenade 

Providence 

Towne commons 

CLL 

ALN610 

FGS 


PROV, PROL 



CIvic lantern 

Dundee 

federal gLobe 

Promenade 

Providence 

Towne commons 

CLL 

ALN610 

FGS 


PROV 


WMA6 

Wt: 14 lbs 

WMA7 

Wt: 16 lbs 

25 1/2" 

638mm 

16" 

400mm 

5 1/2" 

138mm 

8" 

200mm 

7/16" 

11mm 

4-PLC 

9 1/8" 

228mm 

3/4" 

19mm 

WIREWAY 

22" 

550mm 

26 1/2" 

663mm 

25 1/2" 

638mm 

16" 

400mm 

5 1/2" 

138mm 

8" 

200mm 

5 3/4" 

144mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

22" 

550mm 


Promenade 

Towne commons 




Dundee 

ALN610 

Promenade PRMS, PRMN, PRM3-PM 

Providence PROV 

Towne commons ALN440, ALN445, ALN540PM 



Wall Mount 

ALN440 WMA55 

WMA8 

Wt: 10 lbs 

20 1/4" 

506mm 

6" 

150mm 

4" 

100mm 

12" 

300mm 

10" 

250mm 

6" 

150mm 

3/4" 

19mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

11 7/8" 

297mm 

24 1/2" 

613mm 



Promenade 

Towne commons 

PRMD, PRM3 


ACSQ 

PRMN 

ALN438* 

WMA9D 

Wt: 6 lbs 

ACRD 

SACSQ 

PRMS 

PRMD 

ALN440 

ALN445 

3 1/2" 

8" 88mm 

200mm 

7" 

175mm 

3" 

75mm 

3/8" 

9mm 

4-PLC 

3/4" 

19mm 

WIREWAY 

16" 

400mm 

PRM2 

SACRD 

PROMENADE 


ALN540PM 

PRM3 



designed 

are custom 


PRM4 

PROVIDENCE ® 


Promenade PRMD, PRM3 

Towne commons ALN440D, ALN445D, ALN540D 

WMA9U Wt: 8 lbs 

CLL 


PROL 

ALN610 


3" 

75mm 3/8" 

9mm 

3 1/2" 4-PLC 

8" 

88mm 

200mm 

3/4" 

7" 

19mm 

175mm WIREWAY 

16" 

400mm 

FGS 

PROV 

PKWM 

18 

FGL 

PROS* 


are custom 

designed 


PKWS 




Dundee 

Promenade 

Providence 

Towne commons 

ALN610 


PROV 

ALN440, ALN445, ALN540PM

WMA10 

Wt: 16 lbs 

WMA11 

Wt: 10 lbs 

25" 

625mm 

25 1/2" 

638mm 

16" 

400mm 

3/8" 

9mm 

4-PLC 

3/4" 

19mm 

WIREWAY 

5 3/4" 

144mm 

22" 

550mm 

4" 

100mm 

26" 

650mm 

23" 

575mm 

3" 

75mm 

5" 

125mm 

3/4" 

19mm 

WIREWAY 

32 1/4" 

806mm 

48" 

1,200mm 

3/8" 

9mm 

4-PLC 

4" 

100mm 


Promenade 

Towne commons 

PRMD, PRM3 



Promenade 

Towne commons 



WMA12 

Wt: 12 lbs 

WMA16 

Wt: 22 lbs 

26" 

650mm 

6" 

150mm 

4" 

100mm 

3/8" 

9mm 

4-PLC 

28" 

700mm 

12" 

300mm 10" 

250mm 

6" 

150mm 

1 1/2" 

37.5mm 

3/4" 

19mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

23" 

575mm 

39" 

975mm 

44" 

1,100mm 

38" 

950mm 

3/4" 

19mm 

WIREWAY 

9" 

225mm 

6" 

150mm 


Promenade 

Towne commons 




Promenade 

Towne commons 



WMA17 

Wt: 15 lbs 

WMA18 

Wt: 18 lbs 

36" 

900mm 

34" 

850mm 

6" 

150mm 

4" 

100mm 

3/8" 

9mm 

4-PLC 

3/4" 

19mm 

WIREWAY 

1 3/4" 

43.75 

5 1/8" 

128mm 

25" 

625mm 

2 1/8" 

53mm 

26" 

650mm 

23" 

575mm 

6" 

150mm 

4" 

100mm 

5" 

125mm 

3/4" 

19mm 

WIREWAY 

25" 

625mm 

3/8" 

9mm 3" 

4-PLC 

75mm 


Promenade 

Towne commons 




Promenade 

Towne commons 

PRMD, PRM3 




Wall Mount 

PROL-WMA59U 

WMA22D 

Wt: 4 lbs 

5 1/4" 

131mm 15 1/2" 

388mm 

8 1/2" 

213mm 6" 

150mm 

3/8" 

9mm 

2-PLC 



Promenade 

Towne commons 

PRMD, PRM3 


ACSQ 

PRMN 

ALN438* 

WMA22U 

Wt: 5 lbs 

ACRD 

PRMS 

ALN440 

5 1/4" 

131mm 

15 1/2" 

388mm 

8 1/2" 

213mm 6" 

150mm 

3/8" 

9mm 

2-PLC 

SACSQ 

PRMD 

ALN445 

PRM2 

SACRD 

PROMENADE 


ALN540PM 

PRM3 



designed 

are custom 


PRM4 

PROVIDENCE ® 


Dundee 

Promenade 

Providence 

Towne commons 

WMA59D 

ALN610 


PROV 


Wt: 4.6 lbs 

CLL 


PROL 

ALN610 


5" 

250mm 

7/16" 

11mm 

12" 

300mm 

3 1/2" 

88mm 

14" 

350mm 

10" 

250mm 

FGS 

PROV 

PKWM 

20 

FGL 

PROS* 


are custom 

designed 


PKWS 




providence 

pros

WMTP 

Wt: 34.5 lbs 

WMBL 

Wt: 32 lbs 

29.5"/750mm 

2.3" 

60mm 

32.5"/825mm 

14.0" 

356mm 

22.0" 

550mm 

9.25" 

235mm 

11.5" 

290mm 

16.75" 

425mm 

3.0"/75mm 


arts & crafts 

(ACRD/ACSQ dimensions shown) 

acrd. acsq 


arts & crafts 

32.2" 

805mm 

(ACRD/ACSQ dimensions shown) 

19.19" 

480mm 

acrd. acsq 

46.28" 

1,157mm 

PSWM-BU/PSWM-BD Wt: 18 lbs (PKWM)/7.8 lbs(PKWS) 

BU 

PSWM-TU/PSWM-TD Wt: 18 lbs (PKWM)/7.8 lbs(PKWS) 

BD 

5.74" 

144mm 

9.03" 

226mm 

32.2" 

805mm 

19.19" 

480mm 

46.28" 

1,157mm 

30.72" 

768mm 

46.28" 

1,157mm 

32.2" 

805mm 

17.63" 

441mm 

5.74" 

144mm 

BU 


Parkway Square 

WMA59U 

PKWM, PKWS 

30.72" 

768mm 

46.28" 

1,157mm 

BD 

(PKWM dimensions shown) 

Wt: 4.6 lbs 

9.03" 

226mm 

32.2" 

805mm 

35.5" 

887mm 



(PKWM dimensions shown) 

PKWM, PKWS 

17.63" 

441mm 

35.5" 

887mm 

12" 

300mm 

14" 

350mm 

10" 

250mm 

3 1/2" 

88mm 

TU 

TD 

5" 

250mm 


providence 

pros 

TU 

TD 

PSWS/PKWM-TU 



Pole Mount 

ALN540D-TRA2L 

TRA1M Wt: 7 lbs EPA: .62 

4 3/4" 

119mm 

8 3/4" 

219mm 

4" 

100mm 

7/16" 

186mm 

MTG.HOLE 

2-PLC 

14 3/4" 

369mm 

14 1/2" 

363mm 


PRMN 

ALN438* 

ACSQ 

BACK VIEW 

SIDE VIEW 

4" or 5" pole 


CIvic lantern CLL 

Dundee 

ALN610 

federal gLobe FGS 



TRA1L Wt: 9 lbs EPA: .75 

ACRD 

PRMS 

ALN440 

7/16" 

177mm 

MTG.HOLE 

2-PLC 

17 1/4" 

431mm 

SACSQ 

PRMD 

ALN445 

5 1/2" 

138mm 

10 1/4" 

256mm 

4 3/4" 

119mm 

17 1/2" 

438mm 

PRM2 

BACKVIEW 

SIDEVIEW 

SACRD 

PROMENADE 


ALN540PM 

PRM3 



designed 

are custom 


PRM4 

PROVIDENCE ® 


CIvic lantern 

Dundee 

federal gLobe 

Promenade 

Towne commons 

4" or 5" pole 

CLL 

ALN610 

FGS 



TRA2M Wt: 7 lbs EPA: .62 

CLL 


PROL 

ALN610 


4" 

100mm 

8 3/4" 

219mm 

4 3/4" 

119mm 

7/16" 

11mm 

MTG.HOLE 

2-PLC 

14 3/4" 

369mm 

14 1/2" 

363mm 

5 5/8" 

141mm 

FGS 

PROV 

PKWM 

4" or 5" pole 

22 

FGL 

PROS* 


are custom 

designed 


PKWS 




Promenade 

Towne commons 



TRA2L Wt: 9 lbs EPA: .75 

TRA3 Wt: 14 lbs EPA: .90 

17 1/4" 

431mm 

7/16" 

11mm 

(2)-PLC 

16" 

400mm 

4 3/4" 

119mm 

10 1/4" 

256mm 

5 1/2" 

138mm 

3/8" 

9mm 

WIREWAY 

7/16" 

11mm 

MTG.HOLE 

2-PLC 

17 1/2" 

438mm 

6 3/4" 

169mm 

21 1/4" 

531mm 

18" 

450mm 

2 7/8" 

72mm 

3/4" 

19mm 

SQ. 

WIREWAY 

21 1/4" 

531mm 

BACK VIEW 

SIDE VIEW 

4" or 5" pole 

1 5/8" 

41mm 

4" or 5" pole 


Promenade 

Towne commons 




Dundee 

Promenade 

Towne commons 

ALN610 

PRMS, PRMN 


TRA4 Wt: 16 lbs EPA: 1.81 

TRA5U Wt: 9 lbs EPA: .62 

22" 

550mm 

56" 

1,400mm 

9" 

225mm 

6 5/8" 

166mm 

3" 

75mm 

7/16" 

11mm 

MTG.HOLES 

3/4" 

19mm 

WIREWAY 

4 1/2" 

113mm 

18 1/4" 

456mm 

19 1/4" 

481mm 

6" 

150mm 

4" pole 

4" or 5" pole 


Promenade 

Towne commons 




Dundee 

Promenade 

Towne commons 

ALN610 



TRA5D Wt: 9 lbs EPA: .62 


9" 

225mm 6 5/8" 

166mm 

3" 

75mm 


Promenade 

7/16" 

11mm 

MTG.HOLES 

3/4" 

19mm 

WIREWAY 

4 1/2" 

113mm 

Note: Fixture head welded to arm 

18 1/4" 

456mm 

19 1/4" 

481mm 

4" or 5" pole 


9" 

225mm 6 5/8" 

166mm 

3" 

75mm 


Dundee 

Promenade 

Towne commons 

7/16" 

11mm 

MTG.HOLES 

3/4" 15" 

19mm 375mm 

WIREWAY 

4 1/2" 

113mm 

4" or 5" pole 

19 1/4" 

481mm 

ALN610 





Pole Mount 

ALN445-TRA2M 

TRA6D Wt: 9 lbs EPA: .62 

9" 

225mm 

6 5/8" 

166mm 

3" 

75mm 

7/16" 

11mm 

MTG.HOLES 

3/4" 

19mm 

WIREWAY 

4 1/2" 

113mm 

15" 

375mm 

19 1/4" 

481mm 

4" or 5" pole 




Promenade 


ACSQ 

PRMN 

ALN438* 

ACRD 

PRMS 

ALN440 


SACSQ 

PRMD 

ALN445 

1 1/2" 

38mm 

10 1/2" 

263mm 6 3/4" 

169mm 

7/16" 

11mm 

(2)-PLC 

3/8" 

9mm 

WIREWAY 

20" 

500mm 

SACRD 

PRM2 

PROMENADE 


ALN540PM 

PRM3 



designed 

are custom 


PRM4 

PROVIDENCE ® 


CIvic lantern 

Dundee 

federal gLobe 

promenade 

providence 

towne commons 

3" 

75mm 

4" or 5" pole 

CLL 

ALN610 

FGS 

prms, prmn, prm3-PM 

Prov, PROL 



CLL 


PROL 

ALN610 


7/16" 

11mm 

(2) -PLACES 

15 1/8" 

28mm 

13 13/16" 

345mm 

3 1/2" 

88mm 

1" 

25mm 

WIRE WAY 

FGS 

PROV 

PKWM 

1 1/16" 

27mm 

4" pole 

24 

FGL 

PROS* 


are custom 

designed 


PKWS 




CIvic lantern 

Dundee 

federal gLobe 

promenade 

providence 

towne commons 

CLL 

ALN610 

FGS 


Prov, PROL 



TRA60 Wt: 35 lbs EPA: 2.40 (5" O.D. Ple) 

11 1/4" 

281mm 

7/16" 

11mm 

(2)-PLC 

WIREWAY 

11 3/4" 

294mm 

9/16" 

14mm 

14" 

350mm 

11 1/2" 

288mm 5 3/4" 

144mm 

48" 

1,200mm 

3/4" 

19mm 

4 1/2" 

113mm 

4" or 5" pole 5" pole 



CIvic lantern 

Dundee 

federal gLobe 

promenade 

providence 

towne commons 

CLL 

ALN610 

FGS 


Prov 



Promenade 

PRM2, PRM4 


TRA7-2 Wt: 18 lbs EPA: 1.62 

24" 

600mm 

50" 

1,250mm 

28 1/4" 

706mm 

28 7/8" 

722mm 

6" 

150mm 

4 1/4" 

106mm 

6" 

150mm 

4 7/8" 

122mm 

4" pole 

4" pole 


Promenade 

Towne commons 




Promenade 

Towne commons 




TRA8-2 Wt: 21 lbs EPA: 2.68 

24" 

600mm 

50" 

1,250mm 

54" 

1,350mm 

32" 

800mm 

56 1/4" 

1,406mm 

32 1/4" 

806mm 

6" 

150mm 

6" 

150mm 


Promenade 

Towne commons 

4" pole 




Promenade 

Towne commons 

4" pole 





Pole Mount 

ALN540PM-2-TRA55 


27 3/4" 

694mm 

46 1/2" 

1,163mm 

24 1/4" 

606mm 

6" 

150mm 



Promenade 

Towne commons 

4" pole 



ACSQ 

PRMN 

ALN438* 

TRA9-2 Wt: 25 lbs EPA: 2.72 

55 1/2" 

1,388mm 

ACRD 

PRMS 

ALN440 

SACSQ 

PRMD 

ALN445 

46 1/2" 

1,163mm 

6" 

150mm 

24 1/4" 

606mm 

SACRD 

PRM2 

PROMENADE 


ALN540PM 

PRM3 



designed 

are custom 


PRM4 

PROVIDENCE ® 


Promenade 

Towne commons 

PKWM-PSA-TU 

4" pole 



CLL 


PROL 

ALN610 


FGS 

PROV 

PKWM 

26 

FGL 

PROS* 


are custom 

designed 


PKWS 


PKWM are custom

TRA59D Wt: 3.35 lbs EPA: .13 

10" 

250mm 

7/16" 

11mm 

(2)-PLC 

WIREWAY 

11 1/2" 

288mm 

4" pole 


providence 

Pros 

TRA59U Wt: 3.35 lbs EPA: .16 

11 1/2" 

288mm 

10" 

250mm 

WIREWAY 


providence 

ALN540D-TRA2L 

7/16" 

11mm 

(2)-PLC 

Pros 

4" pole 

prmd-tra9 

PKWS-PSA TU 



Pole Mount 

PRMS-TRA5U 

SLA1 Wt: 12 lbs EPA: 1.09 

23" 

575mm 

32" 

800mm 

6" 

150mm 


PRMN 

ALN438* 

ACSQ 

4" pole 


Dundee 

ALN610 

Providence PROV, PROL 



SLA1-2 Wt: 16 lbs EPA: 1.47 

ACRD 

PRMS 

ALN440 

46" 

1,150mm 

SACSQ 

PRMD 

ALN445 

32" 

800mm 

SACRD 

PRM2 

PROMENADE 


ALN540PM 

PRM3 



designed 

are custom 


PRM4 


Dundee 

Providence 

Promenade 

Towne commons 

6" 

150mm 

4" pole 

ALN610 

PROV, PROL 



PROVIDENCE ® 

SLA3 Wt: 8 lbs EPA: .77 

CLL 


PROL 

ALN610 


24.0" 

610 mm 

24.1 in 

FGS 

PROV 

PKWM 

19.5" 

495 19.5 mmin 

4" pole 

28 

FGL 

PROS* 


are custom 

designed 


PKWS 




Promenade 

Towne commons 

PRMD, PRM3 



27 3/4" 

694mm 

SLA4-2 Wt: 26 lbs EPA: 2.10 

55 1/2" 

1,388mm 

47" 

1,175mm 

24 3/4" 

619mm 

47" 

1,175mm 

24 3/4" 

619mm 

6" 

150mm 

6" 

150mm 


Promenade 

Towne commons 

4" pole 




Promenade 

Towne commons 

4" pole 




SLA7-2 Wt: 16 lbs EPA: 2.34 

50" 

1,250mm 

54" 

1,350mm 

32" 

800mm 

56 1/4" 

1,406mm 34 1/4" 

856mm 

6" 

150mm 

6" 

150mm 


Promenade 

Towne commons 

4" pole 




Promenade 

Towne commons 

4" pole 



SLA7 (5) Wt: 11 lbs EPA: 1.73 

30" 

750mm 

SLA7 (5)-2 Wt: 18 lbs EPA: 2.60 

62" 

1,550mm 

56 7/16" 

1,411mm 30 1/2" 

762mm 

57 1/4" 

1,431mm 

31 1/4" 

781mm 

6" 

150mm 

6" 

150mm 


Promenade 

Towne commons 

5" pole 




Promenade 

Towne commons 

5" pole 





Pole Mount 

ALN445-TRA55 

SLA8U Wt: 5 lbs EPA: .40 

21" 

525mm 

12" 

300mm 

4" or 5" pole 


PRMN 

ALN438* 

ACSQ 


Dundee 

ALN610 

Providence PROV 



SLA8D Wt: 5 lbs EPA: .40 

ACRD 

PRMS 

ALN440 

21 1/8" 

528mm 

SACSQ 

PRMD 

ALN445 

12" 

300mm 

PRM2 

4" or 5" pole 

SACRD 

PROMENADE 


ALN540PM 

PRM3 



designed 

are custom 


PRM4 

PROVIDENCE ® 


Promenade PRMD, PRM3 

Towne commons ALN440D, ALN445D, ALN540D 


26" 

650mm 

CLL 


PROL 

ALN610 


44" 

1,100mm 

25" 

625mm 

6" 

150mm 

30 

FGS 

FGL 

PROV 

PROS* 


are custom 

designed 


PKWM 

PKWS 




Promenade 

Towne commons 

4" pole 



SLA9-2 Wt: 24 lbs EPA: 2.44 


52" 

1,300mm 

23" 

575mm 

44" 

1,100mm 

30" 

750mm 

31" 

775mm 

6" 

150mm 

10" 

250mm 

6" 

150mm 


Promenade 

Towne commons 

4" pole 




Promenade 

Towne commons 

4" pole 



SLA10-2 Wt: 16 lbs EPA: 1.47 


46" 

1,150mm 

30 1/4" 

756mm 

30" 

750mm 

41 3/4" 

1,044mm 

6" 

150mm 

4" 

100mm 

6" 

150mm 

4" pole 

4" pole 


Promenade 

Towne commons 




Promenade 

Towne commons 



SLA16-2 Wt: 28 lbs EPA: 4.38 


60 1/2" 

1,512mm 

26" 

650mm 

41 3/4" 

1,044mm 

40" 

1,000mm 

6" 

150mm 

4" pole 

4" pole 


Promenade 

Towne commons 




Promenade 

Towne commons 





Pole Mount 

PRM4-TRA5D 

SLA17-2 Wt: 24 lbs EPA: 2.05 

52" 

1,300mm 

40" 

1,000mm 

6" 

150mm 



Promenade 

Towne commons 

4" pole 



ACSQ 

PRMN 

ALN438* 

SLA17 (5) Wt: 24 lbs EPA: 2.20 

34 1/4" 

856mm 

ACRD 

PRMS 

ALN440 

49 9/16" 

1,24mm 

SACSQ 

PRMD 

ALN445 

6" 

150mm 

SACRD 

PRM2 

PROMENADE 


ALN540PM 

PRM3 



designed 

are custom 


PRM4 

PROVIDENCE ® 


Promenade 

5" pole 


SLA17 (5)-2 Wt: 33 lbs EPA: 2.90 

68 1/2" 

1,712mm 

CLL 


PROL 

ALN610 


49 9/16" 

1,239mm 

FGS 

PROV 

PKWM 

6" 

150mm 

5" pole 

32 

FGL 

PROS* 


are custom 

designed 


PKWS 




Promenade 

PRMD, PRM2, PRM3, PRM4

35.5" 


SLA18-2 Wt: 22 lbs EPA: 1.59 

30" 

750mm 

62" 

1,550mm 

28" 

700mm 

28" 

700mm 

6" 

150mm 

6" 

150mm 

4" pole 4" pole 


Promenade 

Towne commons 




Promenade 

Towne commons 





20" 

500mm 

20" 

500mm 

4" or 5" pole 4" or 5" pole 


Promenade 

Towne commons 

PRMD, PRM3 



Dundee 

Promenade 

Providence 

32.2" 

Towne commons 805mm 

ALN610 

19.19" 

480mm 


PROV 


46.28" 

1,157mm 

PSA-BU/PSA-BD PKWM Wt: 14.4 lbs EPA: 1.10 

PKWS Wt: 6.41 lbs EPA: .43 

BD 

BU 

PSA-TU/PSA-TD PKWM Wt: 14.4 lbs EPA: 1.10 


5.74" 

144mm 

30.72" 

768mm 

9.03" 

226mm 

32.2" 

805mm 

19.19" 

480mm 

46.28" 

1,157mm 

46.28" 

1,157mm 

32.2" 

805mm 

BU 

PKWS dimensions shown 

BD 

17.63" 

441mm 

35.5" 

887mm 

4" pole PKWS dimensions shown 4" pole 



5.74" 

144mm 

PKWM, PKWS 

9.03" 

226mm 

32.2" 

805mm 



PKWM, PKWS 

30.72" 

768mm 

46.28" 

1,157mm 

17.63" 

441mm 


PM1 


Pier Mount 

PROV-PM3 

PM1 

Wt: 18 lbs 

14" 

350mm 

13" 

325mm 

21" 

525mm 


PRMN 

ALN438* 

ACSQ 

3/8" 

9mm 

4 PLC 

7" 

175mm 45° 

B.C. 

9" 

225mm 

4" DIA 

1 1/4" 

32mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

9" 

225mm SQ 

ACRD 

SACSQ 

PRMS 

PRMD 

PM1 

ALN440 

ALN445 


civic lantern 

Dundee 

Federal globe 

Providence 

Promenade 

Towne commons 

CLL 

ALN610 

FGS PM2 

PROV, PROL 



7" 

175mm 

B.C. 

SACRD 

PRM2 

PROMENADE 


ALN540PM 

PRM3 



designed 

are custom 

13" 

CIVIC LANTERN 325mm DUNDEE 

PRM4 

PROVIDENCE ® 

14" 

350mm 

PM2 

21" 

525mm 

Wt: 22 lbs 

21" 

525mm 

22" 

550mm 

CLL 


PROL 

3/8" 

9mm 

4 PLC 

7" 

ALN610 

175mm 45° 

B.C. 

9" 

225mm 


1 1/4" 

32mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

9" 

225mm SQ 

4" DIA 

3/8" 

9mm 

4-PLC 

FGS 

PROV 

PKWM 

7" 

175mm 

B.C. 

3/4" 

18mm 

WIREWAY 

34 

FGL 

PROS* 


are custom 

designed 


PKWS 




civic lantern 

Dundee 

Federal globe 

Providence 

Promenade 

Towne commons 

CLL 

ALN610 

FGS 

PROV, PROL 



21" 

525mm 

22" 

550mm 

PM3 

° 

1 1/4" 

32mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

PM3 

Wt: 30 lbs 

9" 

225mm SQ 

3/8" 

9mm 

4-PLC 

22" 

550mm 

7" 

175mm 

B.C. 

3/4" 

18mm 

WIREWAY 

9" 

225mm 

45° 

4" DIA 

3/8" 

9mm 

4-PLC 

7" 

175mm 

B.C. 


civic lantern 

Dundee 

Federal globe 

Providence 

Promenade 

Towne commons 

9" 

225mm 

CLL 

ALN610 

FGS 

45° 

PROV, PROL 



3/8" 

9mm 

4-PLC 

7" 

175mm 

B.C. 

PRMS-PM2 


ContemporaRy Luminaire Arms 

Design Excellence 

• Every arm has cast fitter precisely welded 

to the arm, ensuring a perfect alignment of 

the fixture to the pole during installation. 

• The three point attachment provides a rigid 

mounting and a silicone gasket keeps the 

connection watertight. 

• All arms are prewired with quick 

disconnects between the fixture and arm. 

• The arm slips over the pole and rotates to 

allow for aligning the arms no matter how 

the poles were set. Six stainless steel set 

screws secure the arm. 

(This 3-bolt feature for Universe only) 

For wall mounted arms the 

hardware is provided by the 

contractor. 

For pole mounted arms 

the hardware is proved for 

attachment to AAL poles. 

36 


ALL ARMS ARE 

notCREATED 

EQUAL 

Accept no imitations. AAL arms are 

factory fabricated and assembled for maximum 

strength and rigidity. All components are welded 

together as a unitized structure. Easy, error proof 

installation with no field assembly required and all 

arms are prewired. Minimize the cost of installation 

and guarantee a great looking finished project with 

AAL arms. 

FH5-LS4 

indA-wma 

svtl-sla22u 


contemporary LUMINAIRE Arm Matrix 

Wall Mount 

UCM-WMA17 

AWM1 

Wt: 8 lbs 

4"/100 mm 

4"/100mm 

6.5"/165mm 

.50"/12mm x 

.87"/22mm SLOT 

1.0"/25mm HOLE 

CUBIC INDIRECT 

MITRE 

UNIVERSE ® 


SPECTRA 

SP1 

INDC 

INDIRECT 

20.5 in 

520 mm 

1 MITRE in 

The arms for the 

Mitre Medium 

are custom designed 

for the fixture. 


Mitre Large are included 

with the product. 

UCL (large) 

UCM (medium) 

AWM2 

Wt: 5 lbs 

4"/100mm 

INDA (Adjustable head) 

PERICLINE 

UCS (small) 


Universe Small 



5.0"/125 mm 

3"/78mm 

.38"/10 mm x 

.50"/12 mm SLOT 

1.0"/25 mm HOLE 

INDF (fixed head) 

DIRETTO ® 

PER-M (medium) 

SPHERES 


SPECTRA 

SP2 

DIR 

PER-S (small) 

M2WDXA 

Wt: 32 lbs 

FLEX /MiniFLEX 

SPECTRA 

FH 

FM 

The arms for the Flex 



LARGENT ® 

SP1 (large) 

ALB 14-4SHG 


PKWM 

26" 

650mm 

23" 

575mm 

1 1/2" 

38mm 


MITRE 

6" 

150mm 

3/8" 

9mm 

(4-PLC) 

3/4" 

18mm 

WIREWAY 

3" 

75mm 

M2 

37" 

925mm 

SP2 (small) 

38 

SLVT 


Spectra are custom 

designed for the fixture. 


PKWS 



designed

wMA Wt: 10 lbs wma2 Wt: 13.87 lbs 

20 1/2" 

513mm 

8 1/2" 

216mm 

wall plate 

5 1/2"/140mm 

x 

7 1/2"/188mm 

4 7/8" 

122mm 

9" 

225mm 

14 5/8" 

366mm 

6" 

150mm 

WIREWAY 

(2)-KEYWAY 

HOLES 

20 1/2" 

513mm 

5" 

250mm 


DIRETTO 

INDIRECT 

DIR 

INDA, INDF 


CUBIC INDIRECT 

INDC 

wma2-NEG 

Wt: 13.87 lbs 

wma4 

Wt: 12 lbs 

5 1/2" 

138mm 

22 3/4" 

569mm 

4 7/8" 

122mm 

9" 

225mm 

14 5/8" 

366mm 

5" 

250mm 

6" 

150mm 

WIREWAY 

(2)-KEYWAY 

HOLES 

20 1/2" 

513mm 

25 1/2" 

638mm 

16" 

400mm 

8" 

200mm 

5 3/4" 

144mm 

3/4" 

19mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

10 3/4" 

269mm 

9 3/4" 

244mm 


CUBIC INDIRECT 

INDC 


UNIVERSE 

UCM, UCL 

wma5 

Wt: 6 lbs 

WMA6 

Wt: 14 lbs 

22" 

550mm 

8" 

200mm 

7" 

175mm 

4" 

100mm 

2 5/8" 

66mm 

3/4" 

19mm 

WIREWAY 

3/8" 

9mm 

(4-PLC) 

16 3/4" 

419mm 

25 1/2" 

638mm 

16" 

400mm 

5 1/2" 

138mm 

8" 

200mm 

7/16" 

11mm 

4-PLC 

9 1/8" 

228mm 

3/4" 

19mm 

WIREWAY 

26 1/2" 

663mm 


UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 



Wall Mount 

UCM-WMA20 

wma7 

Wt: 16 lbs 

5 1/2" 

138mm 

5 3/4" 

144mm 

22" 

550mm 

25 1/2" 

638mm 

16" 

400mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

8" 

200mm 


MITRE 

UNIVERSE ® 


LARGENT SLVT 

SPHERE ALB14, ALB18 

INDC 

INDIRECT 

20.5 in 

520 mm 

1 MITRE in 


Mitre Medium 






UCL (large) 

UCM (medium) 

wma8 

Wt: 10 lbs 

6" 

150mm 

4" 

100mm 

20 1/4" 

506mm 


PERICLINE 

UCS (small) 





12" 

300mm 

10" 

250mm 

6" 

150mm 

3/4" 

19mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

11 7/8" 

297mm 

24 1/2" 

613mm 


DIRETTO ® 


SPHERES 


UNIVERSE UCM, UCL 

ALB 18 

wma9D 

Wt: 6 lbs 

DIR 

PER-S (small) 


SPECTRA 

16" 

400mm 

FH 

ALB 14-4SHG 


3 1/2" 

8" 88mm 

200mm 

7" 

175mm 

3" 

75mm 

3/8" 

9mm 

4-PLC 

3/4" 

19mm 

WIREWAY 

FM 

SP1 (large) 




LARGENT ® 

PKWM 



SP2 (small) 

40 

SLVT 





PKWS 



designed

wma9U 

Wt: 8 lbs 

wma10 

Wt: 16 lbs 

3" 

75mm 3/8" 

9mm 

3 1/2" 4-PLC 

8" 

88mm 

200mm 

3/4" 

7" 

19mm 

175mm WIREWAY 

16" 

400mm 

25 1/2" 

638mm 

16" 

400mm 

3/8" 

9mm 

4-PLC 

3/4" 

19mm 

WIREWAY 

5 3/4" 

144mm 

22" 

550mm 

4" 

100mm 


LARGENT SLVT 

SPHERES ALB14, ALB18 



wma11 

Wt: 10 lbs 

wma12 

Wt: 12 lbs 

25" 

625mm 

26" 

650mm 

3" 

75mm 

26" 

650mm 

23" 

575mm 

5" 

125mm 

3/4" 

19mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

4" 

100mm 

32 1/4" 

806mm 

48" 

1,200mm 

12" 

300mm 10" 

250mm 

6" 

150mm 

1 1/2" 

37.5mm 

3/4" 

19mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

23" 

575mm 

39" 

975mm 





wma16 

Wt: 22 lbs 

WMA17 

Wt: 15 lbs 

6" 

150mm 

4" 

100mm 

28" 

700mm 

6" 

150mm 

4" 

100mm 

25" 

625mm 

44" 

1,100mm 

38" 

950mm 

3/8" 

9mm 

4-PLC 

3/4" 

19mm 

WIREWAY 

36" 

900mm 

34" 

850mm 

3/8" 

9mm 

4-PLC 

3/4" 

19mm 

WIREWAY 

9" 

225mm 

6" 

150mm 

1 3/4" 

43.75 

5 1/8" 

128mm 

2 1/8" 

53mm 







Wall Mount 

UCS-WCV 

wma18 

Wt: 18 lbs 

6" 

150mm 

4" 

100mm 

5" 

125mm 

25" 

625mm 

26" 

650mm 

23" 

575mm 

3/4" 

19mm 

WIREWAY 

3/8" 

9mm 3" 

4-PLC 

75mm 


MITRE 

UNIVERSE ® 



INDC 

INDIRECT 

20.5 in 

520 mm 

1 MITRE in 


Mitre Medium 






UCL (large) 

UCM (medium) 

wma20 

10" 

250mm 9" 

225mm 

Wt: 12 lbs 

8" 

200mm 

7" 

175mm 

5" 

125mm 

3/4" 

19mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

19 7/8" 

497mm 

3" 

75mm 


PERICLINE 

UCS (small) 







wma22D 

Wt: 4 lbs 


DIRETTO ® 


SPHERES 

5 1/4" 

131mm 15 1/2" 

388mm 

8 1/2" 

213mm 6" 

150mm 

3/8" 

9mm 

2-PLC 

ALB 18 

DIR 

PER-S (small) 


SPECTRA 

ALB 14-4SHG 



FH 


wma22U 

Wt: 5 lbs 

FM 




SP1 (large) 

PKWM 

8 1/2" 

213mm 6" 

150mm 

5 1/4" 

131mm 

3/8" 

9mm 

2-PLC 

15 1/2" 

388mm 

LARGENT ® 

SLVT 

SP2 (small) 




PKWS 



designed 


LARGENT SLVT 

SPHERES ALB14, ALB18 

42 


wma24 

Wt: 12 lbs 

wma35U 

Wt: 12 lbs 

6" 

150mm 

4" 

100mm 

22 1/4" 

556mm 

8" 

200mm 

20" 

500mm 

26" 

650mm 

23" 

575mm 

16" 

400mm 

3/4" 

19mm 

WIREWAY 

27 3/8" 

684mm 

14" 

350mm 

6 5/8" 

166mm 

7" 

175mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

3/8" 

9mm 

4-PLC 




LARGENT 

SPHERES 

SLVT 

ALB18 

wma36U 

Wt: 12 lbs 

wma37 

Wt: 12 lbs 

26 1/4" 

656mm 

8" 

200mm 

20" 

500mm 

5 1/2" 

138mm 

14" 

350mm 

6 5/8" 

166mm 

7" 

175mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

25 1/2" 

638mm 

16" 

400mm 

8" 

200mm 

8" 

200mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

21" 

525mm 


LARGENT 

SPHERES 

SLVT 

ALB18 


UNIVERSE 

UCM, UCL 

wma38 

Wt: 12 lbs 

wma39 

Wt: 14 lbs 

26 1/4" 

656mm 

26" 

650mm 

23" 

575mm 

6" 

150mm 

4" 

100mm 

5" 

125mm 

3/4" 

18mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

30" 

750mm 

25 1/2" 

638mm 

16" 

400mm 

5 1/2" 

138mm 

8" 

200mm 

8" 

200mm 

3/4" 

19mm 

WIREWAY 

7/16" 

11mm 

4-PLC 

39" 

975mm 

21" 

525mm 


UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 



Pole Mount 

SLVT-SLA1-2 


23" 

575mm 

32" 

800mm 

6" 

150mm 

4" pole 


MITRE 

UNIVERSE ® 


largent slvt 

sphereS alb14, ALB18 

INDC 

INDIRECT 

20.5 in 

520 mm 

1 MITRE in 


Mitre Medium 






UCL (large) 

UCM (medium) 

SLA1-2 Wt: 16 lbs EPA: 1.47 

32" 

800mm 

46" 

1,150mm 


PERICLINE 

UCS (small) 





6" 

150mm 


4" pole 

largent slvt 

sphereS alb14, ALB18 


DIRETTO ® 


SPHERES 


16 1/2" 

413mm 

DIR 


FH 

PER-S (small) 

SPECTRA 

ALB 18 

ALB 14-4SHG 


1" 

25mm 

6 1/4" 

156mm 5" 

125mm 

Bolts to pole 


UNIVERSE 

WIREWAY 

5/8" 

16mm 

SQ. 

7/16" 

11mm 

(2)-PLC 

UCM, UCL 

4" pole 


4 1/4" 

106mm 

FM 




SP1 (large) 

PKWM 

24.0" 

610 mm 

24.1 in 

LARGENT ® 

SP2 (small) 

44 

SLVT 





PKWS 



designed 

Bolts to pole 


UNIVERSE 

UCM, UCL 

19.5" 

495 19.5 mmin 

4" pole


SLA4-2 Wt: 26 lbs EPA: 2.10 

27 3/4" 

694mm 

55 1/2" 

1,388mm 

47" 

1,175mm 

24 3/4" 

619mm 

47" 

1,175mm 

24 3/4" 

619mm 


UNIVERSE 

6" 

150mm 

UCM, UCL 

4" pole 


UNIVERSE 

6" 

150mm 

4" pole 

UCM, UCL 


SLA7-2 Wt: 16 lbs EPA: 2.34 

50" 

1,250mm 

54" 

1,350mm 

32" 

800mm 

56 1/4" 

1,406mm 34 1/4" 

856mm 

6" 

150mm 

6" 

150mm 



UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 

SLA7(5) Wt: 11 lbs EPA: 1.73 

SLA7(5)-2 Wt: 18 lbs EPA: 2.60 

30" 

750mm 

62" 

1,550mm 

56 7/16" 

1,411mm 30 1/2" 

762mm 

57 1/4" 

1,431mm 

31 1/4" 

781mm 

6" 

150mm 

5" pole 

6" 

150mm 

5" pole 


UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 



Pole Mount 

UCM-SLA9 


21 1/8" 

528mm 

12" 

300mm 

Bolts to pole 

4" or 5" pole 


MITRE 

UNIVERSE ® 


UNIVERSE 

UCM, UCL 

INDC 

INDIRECT 

20.5 in 

520 mm 

1 MITRE in 


Mitre Medium 






UCL (large) 

UCM (medium) 


21" 

525mm 



DIRETTO ® 

PERICLINE 


UCS (small) 





SPHERES 

Bolts to pole 


largent 

sphereS 

slvt 

alb14, ALB18 

12" 

300mm 

4" or 5" pole 

ALB 18 

DIR 

PER-S (small) 



SPECTRA 

ALB 14-4SHG 

26" 

650mm 

FH 


FM 




SP1 (large) 

PKWM 

44" 

1,100mm 

6" 

150mm 

25" 

625mm 

LARGENT ® 

SLVT 

SP2 (small) 




PKWS 



designed 


UNIVERSE 

4" pole 

UCM, UCL 

46 


SLA9-2 Wt: 24 lbs EPA: 2.44 


52" 

1,300mm 

23" 

575mm 

44" 

1,100mm 

30" 

750mm 

31" 

775mm 

6" 

150mm 

10" 

250mm 

6" 

150mm 

4" pole 

4" pole 


UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 

SLA10-2 Wt: 16 lbs EPA: 1.47 


46" 

1,150mm 

30 1/4" 

756mm 

30" 

750mm 

41 3/4" 

1,044mm 

6" 

150mm 

4" 

100mm 

6" 

150mm 



UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 

SLA16-2 Wt: 28 lbs EPA: 4.38 


60 1/2" 

1,512mm 

26" 

650mm 

41 3/4" 

1,044mm 

40" 

1,000mm 

6" 

150mm 

4" pole 

4" pole 


UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 



Pole Mount 

PKWM-PSA TU 

SLA17-2 Wt: 24 lbs EPA: 2.05 

52" 

1,300mm 

40" 

1,000mm 


MITRE 

UNIVERSE ® 

6" 

150mm 

4" pole 

INDC 

INDIRECT 

20.5 in 

520 mm 

1 MITRE in 


Mitre Medium 






UCL (large) 

UCM (medium) 


UNIVERSE 

UCM, UCL 

SLA17(5) Wt: 24 lbs EPA: 2.20 

34 1/4" 

856mm 


PERICLINE 

UCS (small) 





49 9/16" 

1,24mm 


DIRETTO ® 


SPHERES 

6" 

150mm 

5" pole 

ALB 18 


UNIVERSE 

UCM, UCL 

DIR 


PER-S (small) 

SPECTRA 

SLA17(5)-2 Wt: 33 lbs EPA: 2.90 

FH 

ALB 14-4SHG 


62" 

1,550mm 

FM 




SP1 (large) 

PKWM 

57 1/4" 

1,431mm 

31 1/4" 

781mm 

LARGENT ® 

SLVT 

SP2 (small) 




PKWS 



designed 


UNIVERSE 

6" 

150mm 

5" pole 

UCM, UCL 

48 



SLA18-2 Wt: 22 lbs EPA: 1.59 

30" 

750mm 

62" 

1,550mm 

28" 

700mm 

28" 

700mm 

6" 

150mm 

4" pole 

6" 

150mm 

4" pole 


UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 

SLA20 Wt: 10 lbs EPA: .70 SLA20-2 Wt: 18 lbs EPA: 1.25 

10.5" 

263mm 

3" 

75mm 

19 1/2" 

488mm 

10.5" 

263mm 


3" 

75mm 

39" 

975mm 


UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 

SLA20A Wt: 15 lbs EPA: 1.30 

SLA20A-2 Wt: 26 lbs EPA: 1.94 

19 1/2" 

488mm 

39" 

975mm 

25 3/4" 

644mm 

25 3/4" 

644mm 

3" 

75mm 

4" pole 

3" 

75mm 

4" pole 


UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 



Pole Mount 

UCL-SLA17(5) 

SLA20B Wt: 14 lbs EPA: 1.40 

19 1/2" 

488mm 

25 3/4" 

644mm 


MITRE 

UNIVERSE ® 


UNIVERSE 

3" 

75mm 

4" pole 

UCM, UCL 

INDC 

INDIRECT 

20.5 in 

520 mm 

1 MITRE in 


Mitre Medium 






UCL (large) 

UCM (medium) 

SLA20B-2 Wt: 24 lbs EPA: 1.70 

39" 

975mm 



DIRETTO ® 

PERICLINE 


UCS (small) 





SPHERES 

25 3/4" 

644mm 


UNIVERSE 

3" 

75mm 

4" pole 

UCM, UCL 

ALB 18 

DIR 

PER-S (small) 

SLA20C Wt: 15 lbs EPA: 1.39 


SPECTRA 

19 1/2" 

488mm 

ALB 14-4SHG 

FH 


32" 

800mm 

50 

FM 




LARGENT ® 

SLVT 

SP1 (large) 

SP2 (small) 





PKWM 

PKWS 



designed 


UNIVERSE 

3" 

75mm 

4" pole 

UCM, UCL

SLA20C-2 Wt: 26 lbs EPA: 1.91 


39" 

975mm 

19 1/2" 

488mm 

32" 

800mm 

3" 

75mm 

17 3/4" 

444mm 

4" O.D. POLE 

3" 

75mm 

4" pole 

4" pole 


UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 

SLA20D-2 Wt: 21 lbs EPA: 1.18 


39" 

975mm 

17 3/4" 

444mm 

3" 

75mm 

20" 

500mm 

4" O.D. POLE 

4" pole 

4" or 5" pole 


UNIVERSE 

UCM, UCL 


UNIVERSE 

UCM, UCL 



21" 

525mm 

20" 

500mm 

38 1/4" 

956mm 

6" 

150mm 

Bolts TO 4" pole 

4" or 5" pole 

4" pole 


largent 

xspheres 

slvt 

alb14, alb18 


UNIVERSE 

UCM, UCL 



Pole Mount 

UCM-SLA4 

SLA24-2 Wt: 14 lbs EPA: 1.59 

44" 

1,100mm 

38 3/4" 

969mm 

37 3/8" 

934mm 


MITRE 

UNIVERSE ® 

6" 

150mm 

4" pole 

INDC 

INDIRECT 

20.5 in 

520 mm 

1 MITRE in 


Mitre Medium 






UCL (large) 

UCM (medium) 


UNIVERSE 

UCM, UCL 

SLA24(5) Wt: 11 lbs EPA: 1.17 

27 1/8" 

678mm 


PERICLINE 

UCS (small) 





45 1/2" 

1,138mm 

43 7/8" 

1,097mm 


DIRETTO ® 


SPHERES 


UNIVERSE 

6" 

150mm 

UCM, UCL 

5" pole 

ALB 18 

DIR 

PER-S (small) 

SLA24(5)-2 Wt: 16 lbs EPA: 1.81 


SPECTRA 

56 1/4" 

1,406mm 

ALB 14-4SHG 

FH 


46" 

1,150mm 

FM 

SP1 (large) 




PKWM 

6" 

150mm 

52 

LARGENT ® 

SLVT 

SP2 (small) 





PKWS 



designed 


UNIVERSE 

UCM, UCL 

5" pole

M2PXA Wt: 41 lbs EPA: 1.55 

PT2 PER-S Wt: 11 lbs EPA: .608 

PER-M Wt: 20 lbs EPA: .922 

SMALL CYLINDRICAL 

17" 

432mm 

SMALL RECTILINEAR 

23" 

575mm 

30" 

760mm 

35" 

889mm 

37" 

940mm 

37" 

940mm 

35" 

899mm 

37" 

940mm 

MEDIUM CYLINDRICAL 

24" 

600mm 

MEDIUM RECTILINEAR 

32" 

800mm 

4" pole 

42 7/16" 

1,078mm 

42 1/2" 

1,078mm 


mitre 

M2 


pericline 

per-s, per-m 

PSTS Wt: 6 lbs EPA: .291 

PSTT Wt: 6.71 lbs EPA: .367 

5.5" 

140 5.5 mmin 

2.4" 

60 2.4 mmin 

12.9 

12.9" 

in 

330 mm 

25.8" 

25.8 in 

655 mm 

3" pole 

4" pole 


Universe 

ucs 


Universe 

ucs 

PCVS Wt: 5.27 lbs EPA: .268 

PCVT Wt: 5.27 lbs EPA: .322 

20.3" 

515 mm 

17.0 17.0" in 

430 mm 

12.5" 

320 mm 

24.6" 

625 mm 



universe 

ucs 


Universe 

ucs 



Pole Mount 

SP1-TAP1 

PMAS Wt: 15 lbs EPA: .52 

23 3/4" 

594mm 

44 3/8" 

1,109mm 

34 3/8" 

859mm 

12" 

300mm 

4 3/8" 

109mm 

18 1/4" 

456mm 

4" O.D. POLE 


MITRE 

UNIVERSE ® 


diretto 

dir 

4" pole 

INDC 

INDIRECT 

20.5 in 

520 mm 

1 MITRE in 


Mitre Medium 






UCL (large) 

UCM (medium) 

PMAT DIR Wt: 24 lbs EPA: .52 

INDC Wt: 24 lbs EPA: .82 

36 7/16" 

911mm 

17 11/16" 

442mm 



DIRETTO ® 

PERICLINE 


UCS (small) 





SPHERES 

34 3/8" 

859mm 

12" 

300mm 

4 3/8" 

109mm 

4" pole 

4" O.D. POLE 

3" 

75mm 

33" 

835mm 

ALB 18 

DIR 

PER-S (small) 


SPECTRA 

ALB 14-4SHG 

FH 


48" 

1,200mm 

4" pole 

FM 




LARGENT ® 

SP1 (large) 

PKWM 


diretto 

INDIRECT 

cubic indirect 

dir 

INDA, Indf 

indc 

SP2 (small) 

54 

SLVT 





PKWS 



designed

12" 

300mm 

12" 

300mm 

12" 4 3/8" 

300mm 109mm 

12" 

4 3/8" 

300mm 

109mm 

4 3/8" 

109mm 

4 3/8" 

109mm 

SAP1 Wt: 9 lbs EPA: .63 

12" 

300mm 

4 3/8" 

109mm 

15" 

375mm 

SLIP OVER 4" pole 


spectra 

17 1/2" 

438mm 

sp1 

4 3/8" 

109mm 

12" 

300mm 

4 3/8" 

109mm 

4 3/8" 

109mm 

12" 

4 3/8" 

300mm 

109mm 

FLARED HOOD 

21 3/4" 

544mm 

4 3/8" 

109mm 

21 3/4" 

544mm 

TAP1 Wt: 12 lbs EPA: .83 

17 1/2" 

438mm 

17 1/2" 

438mm 

30" 

750mm 

FLARED 30" HOOD 

750mm 

FLR HOOD 

DBL, IND, STR HOOD 

DBL , IND & STR 

4 3/8" 

109mm 


35" 

875mm 

HOOD STYLE 

HOOD STYLE 

SAP2 Wt: 15 lbs EPA: .52 

12" 

300mm 

4 3/8" 

109mm 


spectra 

12" 

300mm 

12" 

300mm 


15 1/4" 

381mm 

sp2 

12" 

300mm 

12" 

300mm 

12" 4 3/8" 

300mm 109mm 

TAP2 Wt: 15 lbs EPA: .52 

4 3/8" FLARED HOOD STYLE 

109mm 

FLR 24" HOOD 

600mm 

12" 

300mm 

412" 

3/8" 

300mm 109mm 

4 3/8" 

12" 109mm 

300mm 

15 3/4" 

FLARED 394mm HOOD STYLE 

4 3/8" STR-DBL-IND 

109mm 

4 3/8" 

109mm 

24" 

600mm 

15 1/4" 

381mm 

15 1/4" 

381mm 

15 3/4" 

394mm 


HOOD STYLE 

STR-DBL-IND 30 1/2" HOOD STYLE 

763mm 

4 3/8" 

109mm 

30" 

750mm 

35" 

875mm 

4 3/8" 

109mm 

24" 

600mm 

12" 

300mm 

30 1/2" 

763mm 

FLARED HOOD 

4 3/8" 

109mm 

FLARED HOOD STYLE 

12" 

300mm 

4 3/8" 

109mm 

12" 

300mm 

4 3/8" 

109mm 

4 3/8" 

109mm 

21 3/4" 

544mm 




35" 

spectra 875mm 

HOOD STYLE 

sp1 


4 3/8" 

109mm 


4 3/8" 

109mm 

FLR HOOD 

43 1/2" 

1,088mm 

43 1/2" 

1,088mm 


4 3/8" 

109mm DBL , IND & STR 

HOOD STYLE 


HOOD STYLE 

12" 

300mm 

12" 

300mm 

12" 

300mm 

4 3/8" 

109mm 

4 3/8" 

109mm 

STR-DBL-IND 


30 1/2" 

available with: 763mm 

spectra 

32.2" 

805mm 

15 3/4" 

394mm 

HOOD STYLE 

19.19" 

480mm 

sp2 

12" 

300mm 

12" 

300mm 


4 3/8" 

109mm 


31 1/2" 

788mm 

4 3/8" 

109mm 

4 3/8" 

109mm 

FLR HOOD 

31 1/2" 

788mm 

STR-DBL-IND 

46.28" 

1,157mm 


STR-DBL-IND 

HOOD STYLE 

HOOD STYLE 

4 3/8" 

109mm 

PSA-BU/PSA-BD PKWM Wt: 6.4 lbs EPA: 1.10 



BD 

BU 

4 3/8" 

PSA-TU/PSA-TD 109mm 

PKWM Wt: 14.4 lbs EPA: 1.10 



4 3/8" 

109mm 

43 1/2" 

1,088mm 

32.2" 

805mm 


HOOD STYLE 

BU 

PKWS dimensions shown 

19.19" 

480mm 

BD 

46.28" 

1,157mm 

12" 

300mm 

5.74" 

144mm 

17.63" 

441mm 

4 3/8" 

109mm 

31 1/2" 

788mm 

STR-DBL-IND35.5" 

HOOD STYLE 

887mm 

30.72" 

768mm 

46.28" 

1,157mm 

4" pole PKWS dimensions shown 4" pole 

9.03" 

226mm 

32.2" 

805mm 

available 

5.74" 

with: 

144mm 


PKWM, PKWS 

9.03" 

226mm 

32.2" 

805mm 



PKWM, PKWS 

30.72" 

768mm 

46.28" 

1,157mm 

17.63" 

441mm 

35.5" 

887mm 



Pole Mount 

FH3-TLC5 


22" 

550mm 

56" 

1,400mm 

6" 

150mm 


MITRE 

UNIVERSE ® 


perspect 

universe 

sl pld 

ucm, ucl 

4" pole 

INDC 

INDIRECT 



DIRETTO ® 

20.5 in 

520 mm 

1 MITRE in 


Mitre Medium 






PERICLINE 


UCL (large) 

UCM (medium) 

UCS (small) 





SPHERES 


9" 

225mm 

6 5/8" 

166mm 

Bolts to pole 

3" 

75mm 


largent 

perspect 

sphereS 

7/16" 

11mm 

MTG.HOLES 

3/4" 

19mm 

WIREWAY 

4 1/2" 

113mm 

slvt 

sl pl 

alb18 

18 1/4" 

456mm 

4" or 5" pole 

19 1/4" 

481mm 


ALB 18 

DIR 

PER-S (small) 


FH 

SPECTRA 

ALB 14-4SHG 


9" 

225mm 6 5/8" 

166mm 

3" 

75mm 

7/16" 

11mm 

MTG.HOLES 

3/4" 15" 

19mm 375mm 

WIREWAY 

4 1/2" 

113mm 

19 1/4" 

481mm 

FM 

SP1 (large) 

Bolts to pole 

4" or 5" pole 




LARGENT ® 

SP2 (small) 

PKWM 


largent 

perspect 

spheres 

slvt 

sl pl 

alb18 

56 

SLVT 





PKWS 



designed


TRA7-2 Wt: 18 lbs EPA: 1.62 

24" 

600mm 

50" 

1,250mm 

28 7/8" 

722mm 

28 1/4" 

706mm 

6" 

150mm 

4" pole 

4 1/4" 

106mm 

6" 

150mm 

4" pole 

4 7/8" 

122mm 


perspect 

universe 

sl pld 

ucm, ucl 


perspect 

universe 

sl pld 

ucm, ucl 


24" 

600mm 

TRA8-2 Wt: 21 lbs EPA: 2.68 

50" 

1,250mm 

54" 

1,350mm 

32" 

800mm 

56 1/4" 

1,406mm 

32 1/4" 

806mm 


perspect 

universe 

6" 

150mm 

4" pole 

sl pld 

ucm, ucl 


perspect 

universe 

6" 

150mm 

4" pole 

sl pld 

ucm, ucl 


TRA9-2 Wt: 25 lbs EPA: 2.72 

27 3/4" 

694mm 

55 1/2" 

1,388mm 

46 1/2" 

1,163mm 

24 1/4" 

606mm 

46 1/2" 

1,163mm 

24 1/4" 

606mm 

6" 

150mm 

6" 

150mm 


perspect 

universe 



sl pld 

perspect sl pld 

ucm, ucl 

universe ucm, ucl 


PM1 


Pier Mount 

PM1 

Wt: 18 lbs 

14" 

350mm 

13" 

325mm 

21" 

525mm 

4" DIA 


INDC 

INDIRECT 

MITRE 

20.5 in 

520 mm 

1 MITRE in 


Mitre Medium 






UNIVERSE ® 

UCL (large) 

PM1 

UCM (medium) 


LARGENT 

3/8" 

9mm 

4 PLC 

7" 

175mm 45° 

B.C. 

9" 

225mm 

SLVT 

PM2 

1 1/4" 

32mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

9 

225 

7" 

175mm 

B.C. 


PERICLINE 

UCS (small) 


Universe 14" Small 

350mm 



PM2 

Wt: 22 lbs 

21" 

525mm 


DIRETTO ® 

PER-M (medium) 13" 

325mm 

SPHERES 

21" 

525mm 

22" 

550mm 

ALB 18 

DIR 


FH 

PER-S (small) 

SPECTRA 

3/8" 

9mm 

4 PLC 

7" 

175mm 45° 

B.C. 

9" 

225mm 

ALB 14-4SHG 

1 1/4" 

32mm 


WIREWAY 

3/8" 

9mm 

4-PLC 

9" 

225mm SQ 

4" DIA 

3/8" 

9mm 

4-PLC 

FM 




SP1 (large) 

PKWM 


LARGENT 

7" 

175mm 

B.C. 

SLVT 

3/4" 

18mm 

WIREWAY 

LARGENT ® 

SP2 (small) 

58 

SLVT 





PKWS 



designed

21" 

525mm 

22" 

550mm 

pier MOUNT 

PM3 

45° 

PM3 

Wt: 30 lbs 

1 1/4" 

32mm 

WIREWAY 

3/8" 

9mm 

4-PLC 

9" 

225mm SQ 

3/8" 

9mm 

4-PLC 

22" 

550mm 

7" 

175mm 

B.C. 

3/4" 

18mm 

WIREWAY 

9" 

225mm 

45° 

4" DIA 

3/8" 

9mm 

4-PLC 

7" 

175mm 

B.C. 


LARGENT 

9" 

225mm 

SLVT 

45° 

3/8" 

9mm 

4-PLC 

7" 

175mm 

B.C. 

SLVT-PM2 


poles 

WIND MAP 

All fixtures and arms are assigned an EPA value (Effective Projected 

Area) which is defined as the maximum two dimensional area 

multiplied by the drag coefficient (Cd) designated by AASHTO. 

The sum of the fixture and arm EPA must not exceed the maximum 

allowable pole EPA at the selected design wind speed. 

NOTES 

• The wind map presented is intended to be used as a general 

guide for selection of a design wind speed. Always consult the 

local authority that has jurisdiction over the special wind region in 

order to determine the correct design wind speed. 

• Maximum allowable EPA values are calculated based on a 50 

year recurrence interval in accordance with AASHTO 2001, 4th 

Edition (American Association of State Highway and Transportation 

Officials). 

• Wind speed values are 3-second gust speeds for poles mounted 

at ground level for exposure C category. 

Hawaii 

American Association of State Highway and Transportation Officials: 

444 N. Capitol Street, NW, Suite 249, Washington, D.C. 20001 

(202) 624-5800, www.aashto.org 

105 

Portland. 

. 

.Eureka 

. 

Roseburg 

San Francisco 

Alaska Note: 

For coastal areas and islands 

use nearest contour. 

.Fresno 

Alaska 

Spokanẹ 

.Seattle 

.Reno 

. 

Los Angeles 

. 

. 

Pendleton 

. 

Burns 

. 

Winnemucos 

. 

San Diego 

130 

85 

Tonopah 

. 

Ḅoise 

Las Vegas 

.Yuma 

Missoula. 

Pocatello 

. 

.Milford 

. 

Salt Lake City 

. 

Phoenix 

Anchorage 

. 

Great Falls 

120 

.Fairbanks 

90 

. 

.Havre 

. 

Billings 

.Lander 

. 

Grand Junction 

. 

Cheyenne 

Albuquerquẹ 

110 

. 

El Paso 

100 

90 

130 

90 

.Denver 

. 

Juneau 

Williston 

. 

Amarillo 

. 

Bismarck 

. 

North Platte 

. 

Dodge City 

. 

.Del Rio 

Oklahoma City 

Abilene 

. 

San Antonio 

100 

110 

. 

Huron 

Fargo. 

. 

WARNINGS 

• Caution must be exercised in the selection of a design wind 

speed where the pole is to be installed in a special wind region 

(as indicated by the wind map) or in an area where wind speed 

prediction is limited such as: 

Mountainous terrain 

Gorges 

Oceans or large bodies of water 

Large areas of open land 

Areas that are prone to hurricanes, typhoons, cyclones, tornadoes 

or any extreme environmental condition 

• Poles that are to be installed on structures higher than ground level 

(such as buildings and bridges) may be subjected to vibration, 

oscillations, and other fatigue effects, which are not covered by the 

AAL warranty. 

• The use of banners or other appendages may severely affect 

the loading of a pole. No banner or other appendages should be 

attached to an AAL pole unless designed and approved by AAL. 

• Pole foundations should be designed and constructed based on 

local conditions and/or codes. AAL does not offer recommendations 

for the foundation of the pole. 

• Poles should never be erected without the luminaire installed. 

Warranty is voided if the pole is erected without the luminaire. The 

warranty is voided if the pole is not grouted under the entire base 

after installation. 

Lincoln 

. 

Fort Worth 

. 

. 

Houston. 

Brownsville 

90 

100 130 

110 120 

90 

. 

Ịnternational Falls 

Duluth. 

. 

Minneapolis Green Bay . 

Des Moines 

Dubuque . 

. 

Ḳansas City 

St. Louis. 

. 

Little Rock 

. Shreveport 

New Orleans . 

140 

Chicago . 

. 

Springfield 

. 

. 

Memphis 

Jackson 

150 

. 

Indianapolis 

. 

. 

Birmingham 

. 

. S Ste. Marie 

. 

Lansing 

Detroit. 

. 

Pensacola 

. 

Columbus 

Lexington 

. 

Nashville Knoxville 

Puerto Rico 

125 

. 

Charleston 

. Buffalo 

.Pittsburgh 

. Atlanta 

Charleston 

. Jacksonville 

. Tampa 

150 

. 

. 

Columbia 

Harrisburg 

Washingtoṇ 

Richmond 

Raleigh . 

. 

. 

140 

. 

New York 

. 

Norfolk. 

Portland 

Burlington 

Concord 

Albanỵ 

. 

Wilmington 

150 

Miami 

. 

Hatteras 

. 

Boston 

. 

. 

. 

New Haven 

140 

. 

Caribou 

130 

. 

90 

100 

110 

120 

130 

Special Wind Region 

Consult Local Authorities 

60 

130 

130 


120 

Wind map is for basic reference only. Please consider any unusual 

circumstances where normal wind loads may exceed expectations and 

select product accordingly.

AAL 

POLES 

PRM4-TRA35D 

AAL poles are designed for maximum strength to 

resist wind loads and perform well with the endless 

variety of fixtures, arms and accessories. Whether 

the pole is ten feet or twenty-five feet tall, the same 

robust design and structural integrity is built into 

every pole at AAL. 

At AAL, we design and manufacture aluminum poles 

for the best balance of strength, corrosion resistance 

and longevity. 

PRM2 -TRA35D 


Aluminum poles 

Extruded shafts of 

high strength 6061 

T-6 aluminum. 

AAL 

Aluminum Poles 

All hand holes (access 

cover) are reinforced 

with a cast aluminum 

ring welded around the 

perimeter of the opening. 

AAL available 

aluminum poles 

• PS3 

• PR3 

• PS4 

• PR4 

• PS5 

• PR5 

62 


PR3 

3” round (rd) pole 

catalog no. Maximum allowable epa (MPH) 

BASE POLE oah shaft WT 85 90 100 110 120 130 140 150 

PR3 3R8-125 8’ (2.4m) 3” RD x .125” 15 13.4 11.8 9.4 7.5 6.2 5.1 4.2 3.6 

PR3 3R10-125 10’ (3.1m) 3” RD x .125” 18 10.1 8.8 6.9 5.5 4.4 3.5 2.9 2.3 

Note: Overall height is measured to post top adapter, or top of pole cap. 

12" 

3" O.D. POLE 

2x4 INCH 

REINFORCED 

HANDHOLE 

(10' pole only) 

SPECIFICATIONS 

Base shall be cast aluminum #356 alloy, free of any porosity, foreign materials, 

or cosmetic fillers. Base casting shall be heat treated to a T-6 condition, and of 

uniform wall thickness, with no warping or mold shifting. 

GROUT UNDER ENTIRE BASE 

(BY OTHERS) 

3 1/2" 

ANCHOR BOLT 

PROJECTION 

7" 

B.C. 

HANDHOLE LOCATION 

9" 

BOTTOM VIEW 

(INDICATES POLE IS LAYING DOWN 

WITH HANDHOLE FACING UP) 

warnings 

Caution must be exercised in the selection of a design wind speed when the pole 

is to be installed in a special wind region (as indicated by the wind map) or in an 

area where wind speed is unpredictable. 

AAL recommends consulting a local engineer when the pole is to be installed in 

an area that may be subject to extreme weather and exposure. 

Poles installed on structures such as buildings and bridges may be subjected to 

vibration, oscillations, and other fatigue effects which are not covered by the AAL 

warranty. 

If the products are to be used on an existing foundation or on other structures, 

the customer assumes all responsibility for the structural integrity of the existing 

foundation, anchorage or structures and all the consequences arising therefrom. 

Anchor bolts shall be hot dip galvanized steel. Eight galvanized hex nuts and flat 

washers, and a bolt circle template shall be provided. Anchor bolt for poles are 

3/4" x 24" x 3". 

All concrete foundation details 

are the responsibility of a local 

structural engineer. 



PS3 

3” Square (SQ) pole 

3" OD x 3" 

long tenon 



PS3 3S8-125 8' (2.4m) 3" SQ x .125" 28 10.6 9.4 7.5 6.1 4.9 4.0 3.3 2.7 

PS3 3S10-125 10' (3.1m) 3" SQ x .125" 32 7.3 6.4 3.8 3.8 3.0 2.3 1.8 1.3 

Note: Overall height is measured to top of pole. 





warnings 








warranty. 

The use of banners or other appendages can severely affect the loading of a 

pole. No banner or other appendage should be attached to an AAL pole unless 

approved by AAL. 




Caution 

Poles should never be erected without the luminaire installed. Warranty is voided 

if the pole is erected without the luminaire. The warranty is voided if the pole is 

not grouted under the entire base after installation. 



3/4" x 24" x 3". 




Notes: 

PS3 is used for Parkway Square Accent (Small) Scale - PKWS, and Spectra Small 

Scale - SP2. 

64 



PR4 

4" round (rd) pole 



PR4 4R10-125 10' (3.1m) 4" RD x .125" 25 19.4 17.1 13.5 10.8 8.9 7.4 6.3 5.5 

PR4 4R12-125 12' (3.7m) 4" RD x .125" 28 15.3 13.4 10.5 8.3 6.7 5.6 4.7 4.0 

PR4 4R14-125 14' (4.3m) 4" RD x .125" 32 12.3 10.7 8.2 6.3 5.0 4.1 3.4 2.9 

PR4 4R16-125 16' (4.9m) 4" RD x .125" 35 10.0 8.6 6.4 4.8 3.6 2.9 2.4 2.0 

PR4 4R10-226 10' (3.1m) 4" RD x .226" 38 23.8 21.0 16.7 13.5 11.1 9.3 8.0 6.9 

PR4 4R12-226 12' (3.7m) 4" RD x .226" 44 19.2 16.9 13.3 10.6 8.6 7.2 6.1 5.3 

PR4 4R14-226 14' (4.3m) 4" RD x .226" 51 15.9 13.9 10.8 8.4 6.8 5.6 4.7 4.0 

PR4 4R16-226 16' (4.9m) 4" RD x .226" 57 12.4 12.3 9.4 7.3 5.7 4.7 4.0 3.3 

PR4 4R18-226 18’ (5.5m) 4” RD x .226” 63 11.7 10.0 7.5 5.6 4.3 3.5 2.9 2.4 

PR4 4R20-226 20’ (6.2m) 4” RD x .226” 70 9.5 8.1 5.9 4.2 3.1 2.4 1.9 1.6 






warnings 








warranty. 












3/4" x 24" x 3". 



PR5 

5" round (rd) pole 

catalog no. 

mAximum allowable epa (MPH) 


PR5 5R14-188 14' (4.3m) 5" RD x .188" 68 32.3 28.5 22.7 18.6 15.5 13.1 11.2 9.6 

PR5 5R16-188 16' (4.9m) 5" RD x .188" 75 27.3 23.9 19.0 15.5 12.8 10.8 9.2 7.9 

PR5 5R18-188 18' (5.5m) 5" RD x .188" 82 22.8 19.8 15.6 12.7 10.5 8.8 7.4 6.4 

PR5 5R20-188 20' (6.2m) 5" RD x .188" 88 18.9 16.4 12.8 10.3 8.5 7.0 5.9 5.0 

PR5 5R22-188 22' (6.8m) 5" RD x .188" 95 15.8 13.5 10.4 8.3 6.8 5.6 4.7 3.9 

PR5 5R24-188 24' (7.4m) 5" RD x .188" 101 13.1 11.1 8.4 6.6 5.3 4.3 3.6 3.0 

PR5 5R25-188 25' (7.7m) 5" RD x .188" 105 11.9 10.0 7.5 5.9 4.7 3.8 3.1 2.5 

PR5 5R14-250 14' (4.3m) 5" RD x .250" 83 35.7 31.5 25.2 20.6 17.2 14.5 12.4 10.7 

PR5 5R16-250 16' (4.9m) 5" RD x .250" 92 30.5 26.8 21.3 17.4 14.5 12.2 10.4 9.0 

PR5 5R18-250 18' (5.5m) 5" RD x .250" 100 25.8 22.5 17.8 14.5 12.0 10.1 8.6 7.3 

PR5 5R20-250 20' (6.2m) 5" RD x .250" 109 21.8 18.9 14.8 12.0 9.9 8.3 7.0 6.0 

PR5 5R22-250 22' (6.8m) 5" RD x .250" 118 18.5 15.9 12.4 9.9 8.1 6.7 5.7 4.8 

PR5 5R24-250 24' (7.4m) 5" RD x .250" 127 15.7 13.4 10.3 8.2 6.6 5.5 4.5 3.8 

PR5 5R25-250 25' (7.7m) 5" RD x .250" 131 14.5 12.3 9.3 7.4 6.0 4.9 4.0 3.4 






Warnings 

Caution must be exercised in the selection of a design wind speed when the pole is 

to be installed in a special wind region (as indicated by the wind map) or in an area 

where wind speed is unpredictable. 

AAL recommends consulting a local engineer when the pole is to be installed in an 

area that may be subject to extreme weather and exposure. 



warranty. 












3/4" x 24" x 3". 

66 



PS4 

4" Square (sq) pole 

catalog no. 



PS4 4S10-125 10' (3.1m) 4" SQ x .125" 28 15.4 13.5 10.4 8.1 6.4 5.0 4.0 3.1 

PS4 4S12-125 12' (3.7m) 4" SQ x .125" 32 11.8 10.2 7.6 5.7 4.3 3.2 2.3 1.6 

PS4 4S14-125 14' (4.3m) 4" SQ x .125" 37 9.1 7.7 5.5 3.9 2.6 1.7 0.95 0.33 

PS4 4S16-125 16' (4.9m) 4" SQ x .125" 42 6.9 5.7 3.8 2.3 1.3 0.46 - - 

PS4 4S18-125 18’ (5.5m) 4” SQ x .125” 48 4.9 3.9 2.2 0.95 0.01 - - - 

PS4 4S20-125 20’ (6.2m) 4” SQ x .125” 53 3.2 0.75 - - - - - - 



FIXURE 

ORIENTATION 



uniform wall thickness, with no warping or mold shifting 

warnings 




AAL recommends consulting a local engineer when the pole is to be installed in an 




warranty. 







Anchor bolts shall be hot dip galvanized steel. Six galvanized hex nuts and flat 


3/4" x 24" x 3". 






PS5 

5" Square (sq) pole 


BASE POLE oah shaft WT 70 80 90 100 

PS5 5S10-188 10' (3.1m) 5" SQ x .127" 61 32.2 24.5 18.0 14.5 

PS5 5S12-1885 12' (3.7m) 5" SQ x .127" 69 29.0 21.5 15.7 12.5 

PS5 5S14-1885 14' (4.3m) 5" SQ x .127" 78 25.5 18.5 13.5 10.5 

PS5 5S16-188 16' (4.9m) 5" SQ x .127" 86 21.7 15.7 11.3 8.5 

PS5 5S18-188 18' (5.5m) 5" SQ x .127" 95 18.5 12.8 9.0 6.5 

PS5 5S20-188 20' (6.2m) 5" SQ x .127" 103 15.0 9.7 6.5 4.2 






warnings 








warranty. 









3/4" x 24" x 3". 




68 


BASE COVERS 

BASE COVERS 


BC1-4 Fits over a 4"/100mm round pole. 


13"/330mm diameter x 8"/200mm high. 

One piece spun aluminum. 



14"/100mm diameter x 24"/610mm high. 

Two piece cast clamshell. 

DESCRIPTION 

Two piece base covers are cast 

#356 aluminum that fit over standard 

4"/100mm or 5"/125mm round poles. 

Covers are attached with stainless steel 

hardware. Consult your AAL catalog for 

complete details on round poles. 



17"/430mm DIA x 13"/330mm high 

Two piece clamshell. 

*AAL poles configured with BC6 shall have 

hand hole location at 18”. 

BC8-4 Fits over a 4”/100mm round pole. 

12”/305mm diameter x 36”/915mm high. 

Two piece cast clamshell. 



18”/460mm diameter x 30”/760mm high. 

Two piece cast clamshell with a one piece 

upper collar. 

ACBCR Fits over a 4”/100mm round pole. 

ACBCS Fits over a 4”/100mm square pole. 

18”/460mm high x 14”/356mm diameter. 

One piece cast cover with a two piece cast 

upper collar. 

WARNINGS 

Caution must be exercised in the 

selection of a design wind speed when 

the pole is to be installed in a special 

wind region (as indicated by the wind 

map) or in an area where wind speed is 

unpredictable. 

AAL recommends consulting a local 

engineer when the pole is to be 

installed in an area that may be subject 

to extreme weather and exposure. 

Poles installed on structures such 

as buildings and bridges may be 

subjected to vibration, oscillations, 

and other fatigue effects which are not 

covered by the AAL warranty. 

The use of banners or other 

appendages can severely affect the 

loading of a pole. No banner or other 

appendage should be attached to an 

AAL pole unless approved by AAL. 

If the products are to be used on 

an existing foundation or on other 

structures, the customer assumes all 

responsibility for the structural integrity 

of the existing foundation, anchorage 

or structures and all the consequences 

arising therefrom. 

INDF-PR4-BC5-4 

ACRD-PS4-ACBRD 

ARCHITECTURAL AREA LIGHTING 69

Decorative poles 

Extruded shafts of high 

strength 6061 T-6 aluminum. 

The pole shafts are 

set deeply welded 

into the base casting 

for maximum strength. 

AAL 

Decorative 

Base Poles 

All decorative cast 

bases provide large 

internal* cavities for remote 

ballasts and 

managing large 

wiring conduits. 

*Except for DB6, DB10, DB12 

AAL available 

decorative poles 

• DB1 

• DB2 

• DB3 

• DB4 

• DB5 

• DB6 

• DB8 

• DB9 

• DB10 

• DB12 

All castings are produced 

with certified A356 Marine 

Grade aluminum alloy for 

maximum strength. 

The anchor bolt lugs are cast 

as an integral part of the base 

structure, rather than welded 

on as separate pieces which 

can weaken the structure. 

70 


DECORATIVE poles 

DB1 

4" round (rd) & fluted (fl) decorative base 

catalog no. 



DB1 4R10-125 10' (3.1m) 4" RD x .125" 44 19.4 17.1 13.5 10.8 8.9 7.4 6.3 5.5 

DB1 4R12-125 12' (3.7m) 4" RD x .125" 48 15.3 13.4 10.5 8.3 6.7 5.6 4.7 4.0 

DB1 4R14-125 14' (4.3m) 4" RD x .125" 51 12.3 10.7 8.2 6.3 5.0 4.1 3.4 2.9 

DB1 4R16-125 16' (4.9m) 4" RD x .125" 55 10.0 8.6 6.4 4.8 3.6 2.9 2.4 2.0 

DB1 4R10-226 10' (3.1m) 4" RD x .226" 55 23.8 21.0 16.7 13.5 11.1 9.3 8.0 6.9 

DB1 4R12-226 12' (3.7m) 4" RD x .226" 61 19.2 16.9 13.3 10.6 8.6 7.2 6.1 5.3 

DB1 4R14-226 14' (4.3m) 4" RD x .226" 67 15.9 13.9 10.8 8.4 6.8 5.6 4.7 4.0 

DB1 4R16-226 16' (4.9m) 4" RD x .226" 74 12.4 12.3 9.4 7.3 5.7 4.7 4.0 3.3 

DB1 4F10-188 10' (3.1m) 4" FL x .188" 51 22.1 19.5 15.4 12.4 10.2 8.5 7.1 6.1 

DB1 4F12-188 12' (3.7m) 4" FL x .188" 56 17.6 15.4 12.1 9.6 7.7 6.4 5.3 4.4 

DB1 4F14-188 14' (4.3m) 4" FL x .188" 61 14.3 12.5 9.6 7.5 5.9 4.8 3.9 3.2 

DB1 4F16-188 16' (4.9m) 4" FL x .188" 67 11.7 10.1 7.6 5.8 4.4 3.5 2.7 2.2 






warnings 

Caution must be exercised in the selection of a design wind speed when the pole is 

to be installed in a special wind region (as indicated by the wind map) or in an area 

where wind speed is unpredictable. 

AAL recommends consulting a local structural engineer when the pole is to be 

installed in an area that may be subject to extreme weather and exposure. 



warranty. 







Caution 


if the pole is erected without the luminaire. The warranty is voided if the pole is not 

grouted under the entire base after installation. 



3/4" x 24" x 3". 

All concrete foundation details are the responsibility of a local structural engineer. 



DB2 

5" round (rd) & fluted (fl) 

decorative base 

catalog no. 



DB2 5R14-188 14' (4.3m) 5" RD x .188" 116 32.3 28.5 22.7 18.6 15.5 13.1 11.2 9.6 

DB2 5R16-188 16' (4.9m) 5" RD x .188" 123 27.3 23.9 19.0 15.5 12.8 10.8 9.2 7.9 

DB2 5R18-188 18' (5.5m) 5" RD x .188" 129 22.8 19.8 15.6 12.7 10.5 8.8 7.4 6.4 

DB2 5R20-188 20' (6.2m) 5" RD x .188" 136 18.9 16.4 12.8 10.3 8.5 7.0 5.9 5.0 

DB2 5R22-188 22' (6.8m) 5" RD x .188" 142 15.8 13.5 10.4 8.3 6.8 5.6 4.7 3.9 

DB2 5R24-188 24' (7.4m) 5" RD x .188" 148 13.1 11.1 8.4 6.6 5.3 4.3 3.6 3.0 

DB2 5R25-188 25' (7.7m) 5" RD x .188" 151 11.9 10.0 7.5 5.9 4.7 3.8 3.1 2.5 

DB2 5R14-250 14' (4.3m) 5" RD x .250" 132 35.7 31.5 25.2 20.6 17.2 14.5 12.4 10.7 

DB2 5R16-250 16' (4.9m) 5" RD x .250" 140 30.5 26.8 21.3 17.4 14.5 12.2 10.4 9.0 

DB2 5R18-250 18' (5.5m) 5" RD x .250" 150 25.8 22.5 17.8 14.5 12.0 10.1 8.6 7.3 

DB2 5R20-250 20' (6.2m) 5" RD x .250" 158 21.8 18.9 14.8 12.0 9.9 8.3 7.0 6.0 

DB2 5R22-250 22' (6.8m) 5" RD x .250" 167 18.5 15.9 12.4 9.9 8.1 6.7 5.7 4.8 

DB2 5R24-250 24' (7.4m) 5" RD x .250" 176 15.7 13.4 10.3 8.2 6.6 5.5 4.5 3.8 

DB2 5R25-250 25' (7.7m) 5" RD x .250" 180 14.5 12.3 9.3 7.4 6.0 4.9 4.0 3.4 

DB2 5F14-188 14' (4.3m) 5" FL x .188" 116 21.4 18.7 14.8 12.1 10.0 8.2 6.9 5.8 

DB2 5F16-188 16' (4.9m) 5" FL x .188" 123 17.8 15.5 12.1 9.8 8.0 6.6 5.4 4.5 

DB2 5F18-188 18' (5.5m) 5" FL x .188" 129 14.5 12.5 9.7 7.8 6.3 5.1 4.1 3.3 

DB2 5F20-188 20' (6.2m) 5" FL x .188" 136 11.8 10.0 7.6 6.1 4.8 3.7 3.0 2.3 

DB2 5F22-188 22' (6.8m) 5" FL x .188" 142 9.4 7.9 5.8 4.6 3.9 2.6 2.0 1.4 

DB2 5F24-188 24' (7.4m) 5" FL x .188" 148 7.4 6.1 4.3 3.3 2.4 1.7 1.1 0.6 

DB2 5F25-188 25' (7.7m) 5" FL x .188" 151 6.6 5.2 3.6 2.7 1.9 1.2 0.7 0.3 



Base shall be cast aluminum #356 alloy, free of any porosity, foreign materials, or 

cosmetic fillers. Base casting shall be heat treated to a T-6 condition, and of uniform wall 

thickness, with no warping or mold shifting. 

warnings 

Caution must be exercised in the selection of a design wind speed when the pole is to 

be installed in a special wind region (as indicated by the wind map) or in an area where 

wind speed is unpredictable. 

AAL recommends consulting a local structural engineer when the pole is to be installed 

in an area that may be subject to extreme weather and exposure. 



warranty. 

The use of banners or other appendages can severely affect the loading of a pole. 

No banner or other appendage should be attached to an AAL pole unless approved 

by AAL. 

If the products are to be used on an existing foundation or on other structures, the 

customer assumes all responsibility for the structural integrity of the existing foundation, 

anchorage or structures and all the consequences arising therefrom. 

Caution 

Poles should never be erected without the luminaire installed. Warranty is voided if the 

pole is erected without the luminaire. The warranty is voided if the pole is not grouted 

under the entire base after installation. 

Anchor bolts shall be hot dip galvanized steel. Six galvanized hex nuts and flat washers, 

and a bolt circle template shall be provided. Anchor bolts for poles 14 feet high or less 

are 3/4" x 24" x 3". Anchor bolt for poles more than 14 feet high are 1"x 36" x 4". 


72 



DB3 

4" & 5" round (rd) & fluted 

(fl) decorative base 

catalog no. 



DB3 4R10-125 10' (3.1m) 4" RD x .125" 73 

DB3 4R12-125 12' (3.7m) 4" RD x .125" 77 

19.4 17.1 13.5 10.8 8.9 

15.3 13.4 10.5 8.3 6.7 

7.4 

5.6 

6.3 

4.7 

5.5 

4.0 

DB3 4R14-125 14' (4.3m) 4" RD x .125" 81 12.3 10.7 8.2 6.3 5.0 4.1 3.4 2.9 

DB3 4R16-125 16' (4.9m) 4" RD x .125" 84 10.0 8.6 6.4 4.8 3.6 2.9 2.4 2.0 

DB3 4R10-226 10' (3.1m) 4" RD x .226" 85 23.8 21.0 16.7 13.5 11.1 9.3 8.0 6.9 

DB3 4R12-226 12' (3.7m) 4" RD x .226" 92 19.2 16.9 13.3 10.6 8.6 7.2 6.1 5.3 

DB3 4R14-226 14' (4.3m) 4" RD x .226" 98 15.9 13.9 10.8 8.4 6.8 5.6 4.7 4.0 

DB3 4R16-226 16' (4.9m) 4" RD x .226" 104 12.4 12.3 9.4 7.3 5.7 4.7 4.0 3.3 

DB3 4R18-226 18' (5.5m) 4" RD x .226" 110 11.7 10.0 7.5 5.6 4.3 3.5 2.9 2.4 

DB3 4R20-226 20' (6.2m) 4" RD x .226" 116 9.5 8.1 5.9 4.2 3.1 2.4 1.9 1.6 

DB3 4F10-188 10' (3.1m) 4" FL x .188" 80 22.1 19.5 15.4 12.4 10.2 8.5 7.1 6.1 

DB3 4F12-188 12' (3.7m) 4" FL x .188" 86 17.6 15.4 12.1 9.6 7.7 6.4 5.3 4.4 

DB3 4F14-188 14' (4.3m) 4" FL x .188" 91 14.3 12.5 9.6 7.5 5.9 4.8 3.9 3.2 

DB3 4F16-188 16' (4.9m) 4" FL x .188" 96 11.7 10.1 7.6 5.8 4.4 3.5 2.7 2.2 

DB3 4F18-188 18' (5.5m) 4" FL x .188" 101 9.4 8.0 5.6 4.3 3.1 2.3 1.7 1.2 

DB3 4F20-188 20' (6.2m) 4" FL x .188" 106 7.4 6.2 4.3 2.9 1.9 1.2 0.7 0.4 

DB3 5R14-188 14' (4.3m) 5" RD x .188" 100 32.3 28.5 22.7 18.6 15.5 13.1 11.2 9.6 

DB3 5R16-188 16' (4.9m) 5" RD x .188" 106 27.3 23.9 19.0 15.5 12.8 10.8 9.2 7.9 

DB3 5R18-188 18' (5.5m) 5" RD x .188" 113 22.8 19.8 15.6 12.7 10.5 8.8 7.4 6.4 

DB3 5R20-188 20' (6.2m) 5" RD x .188" 120 18.9 16.4 12.8 10.3 8.5 7.0 5.9 5.0 

DB3 5R22-188 22' (6.8m) 5" RD x .188" 127 15.8 13.5 10.4 8.3 6.8 5.6 4.7 3.9 

DB3 5R24-188 24' (7.4m) 5" RD x .188" 134 13.1 11.1 8.4 6.6 5.3 4.3 3.6 3.0 

DB3 5R25-188 25' (7.7m) 5" RD x .188" 138 11.9 10.0 7.5 5.9 4.7 3.8 3.1 2.5 

DB3 5R14-250 14' (4.3m) 5" RD x .250" 113 35.7 31.5 25.2 20.6 17.2 14.5 12.4 10.7 

DB3 5R16-250 16' (4.9m) 5" RD x .250" 122 30.5 26.8 21.3 17.4 14.5 12.2 10.4 9.0 

DB3 5R18-250 18' (5.5m) 5" RD x .250" 131 25.8 22.5 17.8 14.5 12.0 10.1 8.6 7.3 

DB3 5R20-250 20' (6.2m) 5" RD x .250" 139 21.8 18.9 14.8 12.0 9.9 8.3 7.0 6.0 

DB3 5R22-250 22' (6.8m) 5" RD x .250" 148 18.5 15.9 12.4 9.9 8.1 6.7 5.7 4.8 

DB3 5R24-250 24' (7.4m) 5" RD x .250" 157 15.7 13.4 10.3 8.2 6.6 5.5 4.5 3.8 

DB3 5R25-250 25' (7.7m) 5" RD x .250" 161 14.5 12.3 9.3 7.4 6.0 4.9 4.0 3.4 

DB3 5F14-188 14' (4.3m) 5" FL x .188" 100 21.4 18.7 14.8 12.1 10.0 8.2 6.9 5.8 

DB3 5F16-188 16' (4.9m) 5" FL x .188" 106 17.8 15.5 12.1 9.8 8.0 6.6 5.4 4.5 

DB3 5F18-188 18' (5.5m) 5" FL x .188" 113 14.5 12.5 9.7 7.8 6.3 5.1 4.1 3.3 

DB3 5F20-188 20' (6.2m) 5" FL x .188" 120 11.8 10.0 7.6 6.1 4.8 3.7 3.0 2.3 

DB3 5F22-188 22' (6.8m) 5" FL x .188" 127 9.4 7.9 5.8 4.6 3.9 2.6 2.0 1.4 

DB3 5F24-188 24' (7.4m) 5" FL x .188" 134 7.4 6.1 4.3 3.3 2.4 1.7 1.1 0.6 

DB3 5F25-188 25' (7.7m) 5" FL x .188" 138 6.6 5.2 3.6 2.7 1.9 1.2 0.7 0.3 






Base shall be cast aluminum #356 alloy, free of any porosity, foreign materials, or cosmetic 

fillers. Base casting shall be heat treated to a T-6 condition, and of uniform wall thickness, 

with no warping or mold shifting. 

warnings 

Caution must be exercised in the selection of a design wind speed when the pole is to be 

installed in a special wind region (as indicated by the wind map) or in an area where wind 

speed is unpredictable. 

AAL recommends consulting a local structural engineer when the pole is to be installed in an 


Poles installed on structures such as buildings and bridges may be subjected to vibration, 

oscillations, and other fatigue effects which are not covered by the AAL warranty. 

The use of banners or other appendages can severely affect the loading of a pole. No 

banner or other appendage should be attached to an AAL pole unless approved by AAL. 

If the products are to be used on an existing foundation or on other structures, the customer 

assumes all responsibility for the structural integrity of the existing foundation, anchorage or 

structures and all the consequences arising therefrom. 

Caution 

Poles should never be erected without the luminaire installed. Warranty is voided if the pole 

is erected without the luminaire. The warranty is voided if the pole is not grouted under the 

entire base after installation. 

Anchor bolts shall be hot dip galvanized steel. Six galvanized hex nuts and flat washers, and 

a bolt circle template shall be provided. Anchor bolts for poles 14 feet high or less are 3/4" x 

24" x 3". Anchor bolt for poles more than 14 feet high are 1"x 36" x 4". 



DB4 

4" & 5" round (rd) & fluted (fl) 


catalog no. 



DB4 4R10-125 10' (3.1m) 4” RD x .125" 81 19.4 17.1 13.5 10.8 8.9 7.4 6.3 5.5 

DB4 4R12-125 12' (3.7m) 4” RD x .125" 85 15.3 13.4 10.5 8.3 6.7 5.6 4.7 4.0 

DB4 4R14-125 14' (4.3m) 4” RD x .125" 88 12.3 10.7 8.2 6.3 5.0 4.1 3.4 2.9 

DB4 4R16-125 16' (4.9m) 4” RD x .125" 92 10.0 8.6 6.4 4.8 3.6 2.9 2.4 2.0 

DB4 4R10-226 10' (3.1m) 4” RD x .226" 91 23.8 21.0 16.7 13.5 11.1 9.3 8.0 6.9 

DB4 4R12-226 12' (3.7m) 4” RD x .226" 97 19.2 16.9 13.3 10.6 8.6 7.2 6.1 5.3 

DB4 4R14-226 14' (4.3m) 4” RD x .226" 104 15.9 13.9 10.8 8.4 6.8 5.6 4.7 4.0 

DB4 4R16-226 16' (4.9m) 4” RD x .226" 110 12.4 12.3 9.4 7.3 5.7 4.7 4.0 3.3 

DB4 4F10-188 10' (3.1m) 4” FL x .188" 87 22.1 19.5 15.4 12.4 10.2 8.5 7.1 6.1 

DB4 4F12-188 12' (3.7m) 4” FL x .188" 92 17.6 15.4 12.1 9.6 7.7 6.4 5.3 4.4 

DB4 4F14-188 14' (4.3m) 4” FL x .188" 98 14.3 12.5 9.6 7.5 5.9 4.8 3.9 3.2 

DB4 4F16-188 16' (4.9m) 4” FL x .188" 103 11.7 10.1 7.6 5.8 4.4 3.5 2.7 2.2 

DB4 5R14-188 14' (4.3m) 5” RD x .188" 105 32.3 28.5 22.7 18.6 15.5 13.1 11.2 9.6 

DB4 5R16-188 16' (4.9m) 5” RD x .188" 112 27.3 23.9 19.0 15.5 12.8 10.8 9.2 7.9 

DB4 5R18-188 18' (5.5m) 5” RD x .188" 119 22.8 19.8 15.6 12.7 10.5 8.8 7.4 6.4 

DB4 5R20-188 20' (6.2m) 5” RD x .188" 125 18.9 16.4 12.8 10.3 8.5 7.0 5.9 5.0 

DB4 5R22-188 22' (6.8m) 5” RD x .188" 131 15.8 13.5 10.4 8.3 6.8 5.6 4.7 3.9 

DB4 5R24-188 24' (7.4m) 5” RD x .188" 137 13.1 11.1 8.4 6.6 5.3 4.3 3.6 3.0 

DB4 5R25-188 25' (7.7m) 5” RD x .188" 140 11.9 10.0 7.5 5.9 4.7 3.8 3.1 2.5 

DB4 5R14-250 14' (4.3m) 5” RD x .250" 117 35.7 31.5 25.2 20.6 17.2 14.5 12.4 10.7 

DB4 5R16-250 16' (4.9m) 5” RD x .250" 126 30.5 26.8 21.3 17.4 14.5 12.2 10.4 9.0 

DB4 5R18-250 18' (5.5m) 5” RD x .250" 135 25.8 22.5 17.8 14.5 12.0 10.1 8.6 7.3 

DB4 5R20-250 20' (6.2m) 5” RD x .250" 144 21.8 18.9 14.8 12.0 9.9 8.3 7.0 6.0 

DB4 5R22-250 22' (6.8m) 5” RD x .250" 152 18.5 15.9 12.4 9.9 8.1 6.7 5.7 4.8 

DB4 5R24-250 24' (7.4m) 5” RD x .250" 161 15.7 13.4 10.3 8.2 6.6 5.5 4.5 3.8 

DB4 5R25-250 25' (7.7m) 5” RD x .250" 166 14.5 12.3 9.3 7.4 6.0 4.9 4.0 3.4 

DB4 5F14-188 14' (4.3m) 5” FL x .188" 105 21.4 18.7 14.8 12.1 10.0 8.2 6.9 5.8 

DB4 5F16-188 16' (4.9m) 5” FL x .188" 112 17.8 15.5 12.1 9.8 8.0 6.6 5.4 4.5 

DB4 5F18-188 18' (5.5m) 5” FL x .188" 119 14.5 12.5 9.7 7.8 6.3 5.1 4.1 3.3 

DB4 5F20-188 20' (6.2m) 5” FL x .188" 125 11.8 10.0 7.6 6.1 4.8 3.7 3.0 2.3 

DB4 5F22-188 22' (6.8m) 5” FL x .188" 131 9.4 7.9 5.8 4.6 3.9 2.6 2.0 1.4 

DB4 5F24-188 24' (7.4m) 5” FL x .188" 137 7.4 6.1 4.3 3.3 2.4 1.7 1.1 0.6 

DB4 5F25-188 25' (7.7m) 5” FL x .188" 140 6.6 5.2 3.6 2.7 1.9 1.2 0.7 0.3 

74 




Base shall be cast aluminum #356 alloy, free of any porosity, foreign materials, or cosmetic fillers. 

Base casting shall be heat treated to a T-6 condition, and of uniform wall thickness, with no 

warping or mold shifting. 

warnings 

Caution must be exercised in the selection of a design wind speed when the pole is to be installed 

in a special wind region (as indicated by the wind map) or in an area where wind speed is 

unpredictable. 





The use of banners or other appendages can severely affect the loading of a pole. No banner or 

other appendage should be attached to an AAL pole unless approved by AAL. 




Caution 

Poles should never be erected without the luminaire installed. Warranty is voided if the pole is 

erected without the luminaire. The warranty is voided if the pole is not grouted under the entire 

base after installation. 

Anchor bolts shall be hot dip galvanized steel. Six galvanized hex nuts and flat washers, and a 

bolt circle template shall be provided. Anchor bolts for poles 14 feet high or less are 3/4" x 24" x 

3". Anchor bolt for poles more than 14 feet high are 1"x 36" x 4". 

All concrete foundation details are the responsibility of a local structural engineer.


DB5 



catalog no. 


BASE POLE oah shaft WT 85 90 100 110 120 130 

140 150 

DB5 4R10-125 10' (3.1m) 4" RD x .125" 40 12.9 11.4 9.0 7.2 5.9 4.9 4.2 3.7 

DB5 4R12-125 12' (3.7m) 4" RD x .125" 44 10.2 8.9 7.0 5.5 4.5 3.7 3.1 2.7 

DB5 4R14-125 14' (4.3m) 4" RD x .125" 48 8.2 7.1 5.5 4.2 3.3 2.7 2.3 1.9 

DB5 4R16-125 16' (4.9m) 4" RD x .125" 51 6.7 5.7 4.3 3.2 2.4 1.9 1.6 1.3 

DB5 4R10-226 10' (3.1m) 4" RD x .226" 53 15.9 14.0 11.1 9.0 7.4 6.2 5.3 4.6 

DB5 4R12-226 12' (3.7m) 4" RD x .226" 59 12.8 11.3 8.9 7.1 5.7 4.8 4.1 3.5 

DB5 4R14-226 14' (4.3m) 4" RD x .226" 65 10.6 9.3 7.2 5.6 4.5 3.7 3.1 2.7 

DB5 4R16-226 16' (4.9m) 4" RD x .226" 71 8.3 8.2 6.3 4.9 3.8 3.1 2.7 2.2 

DB5 4F10-188 10' (3.1m) 4" FL x .188" 48 14.7 13.0 10.3 8.3 6.8 5.7 4.7 4.1 

DB5 4F12-188 12' (3.7m) 4" FL x .188" 53 11.7 10.3 8.1 6.4 5.1 4.3 3.5 2.9 

DB5 4F14-188 14' (4.3m) 4" FL x .188" 59 9.5 8.3 6.4 5.0 3.9 3.2 2.6 2.1 

DB5 4F16-188 16' (4.9m) 4" FL x .188" 64 7.8 6.7 5.1 3.9 2.9 2.3 1.8 1.5 






warnings 




AAL recommends consulting a local structural engineer when the pole is to be installed in 







assumes all responsibility for the structural integrity of the existing foundation, anchorage 

or structures and all the consequences arising therefrom. 

Caution 





and a bolt circle template shall be provided. Anchor bolt for poles are 3/4" x 24" x 3". 




DB6 

4” round (rd) & fluted (fl) 

decorative base catalog no. mAximum allowable epa (MPH) 


DB6 4R10-125 10' (3.1m) 4" RD x .125" 50 19.4 17.1 13.5 10.8 8.9 7.4 6.3 5.5 

DB6 4R12-125 12' (3.7m) 4" RD x .125" 54 15.3 13.4 10.5 8.3 6.7 5.6 4.7 4.0 

DB6 4R14-125 14' (4.3m) 4" RD x .125" 57 12.3 10.7 8.2 6.3 5.0 4.1 3.4 2.9 

DB6 4R16-125 16' (4.9m) 4" RD x .125" 61 10.0 8.6 6.4 4.8 3.6 2.9 2.4 2.0 

DB6 4F10-188 10' (3.1m) 4" FL x .188" 56 22.1 19.5 15.4 12.4 10.2 8.5 7.1 6.1 

DB6 4F12-188 12' (3.7m) 4" FL x .188" 62 17.6 15.4 12.1 9.6 7.7 6.4 5.3 4.4 

DB6 4F14-188 14' (4.3m) 4" FL x .188" 67 14.3 12.5 9.6 7.5 5.9 4.8 3.9 3.2 

DB6 4F16-188 16' (4.9m) 4" FL x .188" 72 11.7 10.1 7.6 5.8 4.4 3.5 2.7 2.2 

DB6 4R10-226 10' (3.1m) 4" RD x .226" 60 23.8 21.0 16.7 13.5 11.1 9.3 8.0 6.9 

DB6 4R12-226 12' (3.7m) 4" RD x .226" 66 19.2 16.9 13.3 10.6 8.6 7.2 6.1 5.3 

DB6 4R14-226 14' (4.3m) 4" RD x .226" 73 15.9 13.9 10.8 8.4 6.8 5.6 4.7 4.0 

DB6 4R16-226 16' (4.9m) 4" RD x .226" 79 12.4 12.3 9.4 7.3 5.7 4.7 4.0 3.3 






warnings 













Caution 




Anchor bolts shall be hot dip galvanized steel. Eight galvanized hex nuts and flat washers, 



76 



DB8 



catalog no. 



DB8 4R10-125 10' (3.1m) 4" RD x .125" 49 19.4 17.1 13.5 10.8 8.9 7.4 6.3 5.5 

DB8 4R12-125 12' (3.7m) 4" RD x .125" 52 15.3 13.4 10.5 8.3 6.7 5.6 4.7 4.0 

DB8 4R14-125 14' (4.3m) 4" RD x .125" 56 12.3 10.7 8.2 6.3 5.0 4.1 3.4 2.9 

DB8 4R16-125 16' (4.9m) 4" RD x .125" 59 10.0 8.6 6.4 4.8 3.6 2.9 2.4 2.0 

DB8 4R10-226 10' (3.1m) 4" RD x .226" 58 23.8 21.0 16.7 13.5 11.1 9.3 8.0 6.9 

DB8 4R12-226 12' (3.7m) 4" RD x .226" 64 19.2 16.9 13.3 10.6 8.6 7.2 6.1 5.3 

DB8 4R14-226 14' (4.3m) 4" RD x .226" 71 15.9 13.9 10.8 8.4 6.8 5.6 4.7 4.0 

DB8 4R16-226 16' (4.9m) 4" RD x .226" 77 12.4 12.3 9.4 7.3 5.7 4.7 4.0 3.3 

DB8 4F10-188 10' (3.1m) 4" FL x .188" 55 22.1 19.5 15.4 12.4 10.2 8.5 7.1 6.1 

DB8 4F12-188 12' (3.7m) 4" FL x .188" 60 17.6 15.4 12.1 9.6 7.7 6.4 5.3 4.4 

DB8 4F14-188 14' (4.3m) 4" FL x .188" 65 14.3 12.5 9.6 7.5 5.9 4.8 3.9 3.2 

DB8 4F16-188 16' (4.9m) 4" FL x .188" 70 11.7 10.1 7.6 5.8 4.4 3.5 2.7 2.2 






warnings 













Caution 









DB9 


decorative base catalog no. mAximum allowable epa (MPH) 


DB9 4R10-125 10' (3.1m) 4" RD x .125" 43 19.4 17.1 13.5 10.8 8.9 7.4 6.3 5.5 

DB9 4R12-125 12' (3.7m) 4" RD x .125" 47 15.3 13.4 10.5 8.3 6.7 5.6 4.7 4.0 

DB9 4R14-125 14' (4.3m) 4" RD x .125" 50 12.3 10.7 8.2 6.3 5.0 4.1 3.4 2.9 

DB9 4R16-125 16' (4.9m) 4" RD x .125" 54 10.0 8.6 6.4 4.8 3.6 2.9 2.4 2.0 

DB9 4F10-188 10' (3.1m) 4" FL x .188" 50 22.1 19.5 15.4 12.4 10.2 8.5 7.1 6.1 

DB9 4F12-188 12' (3.7m) 4" FL x .188" 56 17.6 15.4 12.1 9.6 7.7 6.4 5.3 4.4 

DB9 4F14-188 14' (4.3m) 4" FL x .188" 61 14.3 12.5 9.6 7.5 5.9 4.8 3.9 3.2 

DB9 4F16-188 16' (4.9m) 4" FL x .188" 66 11.7 10.1 7.6 5.8 4.4 3.5 2.7 2.2 

DB9 4R10-226 10' (3.1m) 4" RD x .226" 54 23.8 21.0 16.7 13.5 11.1 9.3 8.0 6.9 

DB9 4R12-226 12' (3.7m) 4" RD x .226" 61 19.2 16.9 13.3 10.6 8.6 7.2 6.1 5.3 

DB9 4R14-226 14' (4.3m) 4" RD x .226" 67 15.9 13.9 10.8 8.4 6.8 5.6 4.7 4.0 

DB9 4R16-226 16' (4.9m) 4" RD x .226" 73 12.4 12.3 9.4 7.3 5.7 4.7 4.0 3.3 






warnings 








warranty. 







Caution 






3/4" x 24" x 3". 


78 



DB10 



catalog no. 



DB10 5R14-188 14' (4.3m) 5" RD x .188" 89 32.3 28.5 22.7 18.6 15.5 13.1 11.2 9.6 

DB10 5R16-188 16' (4.9m) 5" RD x .188" 95 27.3 23.9 19.0 15.5 12.8 10.8 9.2 7.9 

DB10 5R18-188 18' (5.5m) 5" RD x .188" 102 22.8 19.8 15.6 12.7 10.5 8.8 7.4 6.4 

DB10 5R20-188 20' (6.2m) 5" RD x .188" 109 18.9 16.4 12.8 10.3 8.5 7.0 5.9 5.0 

DB10 5R22-188 22' (6.8m) 5" RD x .188" 116 15.8 13.5 10.4 8.3 6.8 5.6 4.7 3.9 

DB10 5R24-188 24' (7.4m) 5" RD x .188" 123 13.1 11.1 8.4 6.6 5.3 4.3 3.6 3.0 

DB10 5R25-188 25' (7.7m) 5" RD x .188" 127 11.9 10.0 7.5 5.9 4.7 3.8 3.1 2.5 

DB10 5F14-188 14' (4.3m) 5" FL x .188" 89 21.4 18.7 14.8 12.1 10.0 8.2 6.9 5.8 

DB10 5F16-188 16' (4.9m) 5" FL x .188" 95 17.8 15.5 12.1 9.8 8.0 6.6 5.4 4.5 

DB10 5F18-188 18' (5.5m) 5" FL x .188" 102 14.5 12.5 9.7 7.8 6.3 5.1 4.1 3.3 

DB10 5F20-188 20' (6.2m) 5" FL x .188" 109 11.8 10.0 7.6 6.1 4.8 3.7 3.0 2.3 

DB10 5F22-188 22' (6.8m) 5" FL x .188" 116 9.4 7.9 5.8 4.6 3.9 2.6 2.0 1.4 

DB10 5F24-188 24' (7.4m) 5" FL x .188" 123 7.4 6.1 4.3 3.3 2.4 1.7 1.1 0.6 

DB10 5F25-188 25' (7.7m) 5" FL x .188" 127 6.6 5.2 3.6 2.7 1.9 1.2 0.7 0.3 

DB10 5R14-250 14' (4.3m) 5" RD x .250" 101 35.7 31.5 25.2 20.6 17.2 14.5 12.4 10.7 

DB10 5R16-250 16' (4.9m) 5" RD x .250" 110 30.5 26.8 21.3 17.4 14.5 12.2 10.4 9.0 

DB10 5R18-250 18' (5.5m) 5" RD x .250" 119 25.8 22.5 17.8 14.5 12.0 10.1 8.6 7.3 

DB10 5R20-250 20' (6.2m) 5" RD x .250" 127 21.8 18.9 14.8 12.0 9.9 8.3 7.0 6.0 

DB10 5R22-250 22' (6.8m) 5" RD x .250" 135 18.5 15.9 12.4 9.9 8.1 6.7 5.7 4.8 

DB10 5R24-250 24' (7.4m) 5" RD x .250" 143 15.7 13.4 10.3 8.2 6.6 5.5 4.5 3.8 

DB10 5R25-250 25' (7.7m) 5" RD x .250" 145 14.5 12.3 9.3 7.4 6.0 4.9 4.0 3.4 






warnings 








warranty. 







Caution 





washers, and a bolt circle template shall be provided. Anchor bolts for poles 14 

feet high or less are 3/4" x 24" x 3". Anchor bolt for poles more than 14 feet high 

are 1" x 36" x 4". 




DB12 



catalog no. 



DB12 4R10-125 10' (3.1m) 4" RD x .125" 55 19.4 17.1 13.5 10.8 8.9 7.4 6.3 5.5 

DB12 4R12-125 12' (3.7m) 4" RD x .125" 59 15.3 13.4 10.5 8.3 6.7 5.6 4.7 4.0 

DB12 4R14-125 14' (4.3m) 4" RD x .125" 63 12.3 10.7 8.2 6.3 5.0 4.1 3.4 2.9 

DB12 4R16-125 16' (4.9m) 4" RD x .125" 66 10.0 8.6 6.4 4.8 3.6 2.9 2.4 2.0 

DB12 4R10-226 10' (3.1m) 4" RD x .226" 68 23.8 21.0 16.7 13.5 11.1 9.3 8.0 6.9 

DB12 4R12-226 12' (3.7m) 4" RD x .226" 74 19.2 16.9 13.3 10.6 8.6 7.2 6.1 5.3 

DB12 4R14-226 14' (4.3m) 4" RD x .226" 80 15.9 13.9 10.8 8.4 6.8 5.6 4.7 4.0 

DB12 4R16-226 16' (4.9m) 4" RD x .226" 87 12.4 12.3 9.4 7.3 5.7 4.7 4.0 3.3 

DB12 4R18-226 18' (5.5m) 4" RD x .226" 93 11.7 10.0 7.5 5.6 4.3 3.5 2.9 2.4 

DB12 4R20-226 20' (6.2m) 4" RD x .226" 99 9.5 8.1 5.9 4.2 3.1 2.4 1.9 1.6 

DB12 4F10-188 10' (3.1m) 4" FL x .188" 63 22.1 19.5 15.4 12.4 10.2 8.5 7.1 6.1 

DB12 4F12-188 12' (3.7m) 4" FL x .188" 68 17.6 15.4 12.1 9.6 7.7 6.4 5.3 4.4 

DB12 4F14-188 14' (4.3m) 4" FL x .188" 74 14.3 12.5 9.6 7.5 5.9 4.8 3.9 3.2 

DB12 4F16-188 16' (4.9m) 4" FL x .188" 79 11.7 10.1 7.6 5.8 4.4 3.5 2.7 2.2 






warnings 








warranty. 







Caution 






3/4" x 24" x 3". 


80 


COntemporary MULTI-post poles 

AAL 

Contemporary 

& Traditional 

Multi-Post Poles 

AAL available 

multi-post poles 

• 2P/3P 

• C3P 

• C4P/C4PB 

• T4P 

A one piece cast aluminum fitter 

accommodates an optional RBC 

receptacle on the underside 

of the fitter. All poles are prewired for an 

easy installation. 

The anchor bolts and the integral wiring 

box with gasketed cover, is concealed 

by a cast aluminum cover plate to finish 

the clean contemporay design of AAL's 

multi post pole. 

SP2-C3P 


multi post poles 

2P 

dual post pole 

catalog no. 


POLE oah WT 85 90 100 110 120 130 140 150 

2P8 8' (2.5m) 44 24.9 22 17.4 14 11.4 9.4 7.8 6.5 

2P10 10' (3.1m) 50 19.1 16.7 13.0 10.3 8.2 6.6 5.3 4.3 

2P12 12' (3.7m) 55 15.0 13.0 9.9 7.6 5.9 4.5 3.4 2.6 

2P14 14' (4.3m) 62 11.9 10.2 7.5 5.5 4.0 2.9 2.0 1.2 

2P16 16' (4.9m) 67 9.3 7.9 5.5 3.8 2.5 1.5 0.7 0.07 

2P18 18' (5.5m) 72 6.8 5.5 3.5 2.1 1.0 0.13 - - 

2P20 20' (6.2m) 77 4.6 3.5 1.8 0.57 - - - - 

3P8 8' (2.5m) 46 28.8 25.5 20.3 16.5 13.6 11.4 9.6 8.1 

3P10 10' (3.1m) 51 22.3 19.7 15.5 12.4 10.1 8.3 6.8 5.7 

3P12 12' (3.7m) 57 17.8 15.6 12.1 9.5 7.5 6.0 4.8 3.8 

3P14 14' (4.3m) 63 14.1 12.2 9.3 7.1 5.5 4.2 3.1 2.3 

3P16 16' (4.9m) 68 10.6 9.0 6.6 4.8 3.4 2.4 1.5 0.85 

3P18 18' (5.5m) 73 7.4 6.1 4.1 2.7 1.5 0.70 0.03 - 

3P20 20' (6.2m) 78 4.5 3.5 1.9 0.75 - - - - 

Note: Overall height is measured as shown (OAH). 

3P 

Tri post pole 





warnings 













Caution 




Anchor bolts are 3/4" x 24" x 3" hot dip galvanized steel. Eight galvanized hex nuts and 

flat washers, and a bolt circle template are provided. 


OPTIONS/ACCESSORIES 

• RBC 

• TA – Tenon adaptor for SP2 

Note: 

Please refer to accessories/options pages for descriptions. 

82 


C3P 

tri post pole 

catalog no. 


POLE oah WT 85 90 100 110 120 130 140 150 

C3P-8 8' (2.5m) 58 46.4 40.9 32.3 26 21.2 17.4 14.4 12 

C3P-10 10' (3.1m) 65 35.4 31.0 24.1 19.0 15.1 12.1 9.7 7.7 

C3P-12 12' (3.7m) 72 27.6 23.9 18.2 13.9 10.6 8.1 6.1 4.5 

C3P-14 14' (4.3m) 79 21.7 18.6 13.6 9.9 7.1 5.0 3.2 1.8 

C3P-16 16' (4.9m) 86 17.0 14.2 9.9 6.7 4.2 2.3 0.8 - 






warnings 






Poles installed on structures such as buildings and bridges may be subjected 

to vibration, oscillations, and other fatigue effects which are not covered by the 

AAL warranty. 







Caution 


if the pole is erected without the luminaire. The warranty is voided if the pole is 

not grouted under the entire base after installation. 



3/4" x 24" x 3" 



multi post poles 

C4P 

four post pole 

catalog no. 


POLE oah WT 85 90 100 110 120 130 140 150 

C4P-8 8' (2.5m) 50 47.8 42.3 33.7 27.4 22.6 18.8 15.8 13.4 

C4P-10 10' (3.1m) 58 37.1 32.7 25.8 20.7 16.9 13.8 11.4 9.5 

C4P-12 12' (3.7m) 66 29.8 26.1 20.3 16.0 12.8 10.2 8.2 6.6 

C4P-14 14' (4.3m) 71 24.2 21.1 16.1 12.4 9.6 7.5 5.7 4.3 

C4P-16 16' (4.9m) 78 19.7 17.0 12.7 9.5 7.1 5.2 3.7 2.5 

C4PB-8 8' (2.5m) 50 47.8 42.3 33.7 27.4 22.6 18.8 15.8 13.4 

C4PB-10 10' (3.1m) 65 37.1 32.7 25.8 20.7 16.9 13.8 11.4 9.5 

C4PB-12 12' (3.7m) 72 29.8 26.1 20.3 16.0 12.8 10.2 8.2 6.6 

C4PB-14 14' (4.3m) 79 24.2 21.1 16.1 12.4 9.6 7.5 5.7 4.3 

C4PB-16 16' (4.9m) 86 19.7 17.0 12.7 9.5 7.1 5.2 3.7 2.5 


C4PB 

four post pole 



fillers. Base casting shall be heat treated to a T-6 condition, and of uniform wall thickness, with 

no warping or mold shifting. 

warnings 


installed in a special wind region (as indicated by the wind map) or in an area where wind speed 

is unpredictable. 





The use of banners or other appendages can severely affect the loading of a pole. No banner 

or other appendage should be attached to an AAL pole unless approved by AAL. 




Caution 

Poles should never be erected without the luminaire installed. Warranty is voided if the pole is 

erected without the luminaire. The warranty is voided if the pole is not grouted under the entire 

base after installation. 

Anchor bolts shall be hot dip galvanized steel. Six galvanized hex nuts and flat washers, and a 

bolt circle template shall be provided. Anchor bolt for poles are 3/4" x 24" x 3" 


Bolt projection 

3 1/2" 

84 


T4P 

Traditional Four post pole 

catalog no. 


POLE oah WT 85 90 100 110 120 130 140 150 

T4P-8 8' (2.5m) 103 43.6 38.7 30.9 25.1 20.7 17.3 14.6 12.4 

T4P-10 10' (3.1m) 117 32.7 28.8 22.7 18.3 14.8 12.2 10.1 8.4 

T4P-12 12' (3.7m) 131 25.5 22.3 17.3 13.6 10.8 8.7 6.9 5.5 

T4P-14 14' (4.3m) 145 20.2 17.5 13.3 10.2 7.8 5.1 2.3 - 

T4P-16 16' (4.9m) 160 16.2 13.8 10.2 6.1 2.1 - - - 






warnings 













Caution 




Anchor bolts shall be hot dip galvanized steel. Eight galvanized hex nuts and flat washers, 




Pole options/Accessories 

PCA-C 

PCA-T 

AAL 


The PCA Photocell Module is an 

innovative way of overcoming 

problems with photocells that 

cycle the lamp because of 

unwanted light sources in the 

environment. The PCA Photocell 

Modules are rotatable 360 

degrees, so the photocell can be 

aimed away from light sources. 

The Photocell Module accepts 

a standard twist lock photo cell. 

The module has a glass window 

to protect the photocell from the 

elements and premature failure. 

The photocell is also shielded from 

light emissions from the fixture. 

The module is wired on 

both ends for a quick, 

easy installation 

The glass window 

protects the interior of 

the module 

The Photocell Module 

slips over a 4" O.D. pole 

The photocell is shielded 

from the fixture’s illumination, 

even when used with an arm 

mounted fixture. 

The door is held in place 

with two captive screws and 

tethered with a stainless steel 

cable (not shown). 

The Photocell Module is 

rotated by loosening three 

set screws. 

86 

PROV-EPA-T 


Photocell options 

TENON LENGTH 

WILL VARY PER 

FIXTURE TYPE 

TENON LENGTH 

WILL VARY PER 

FIXTURE TYPE 

8.69" 

220mm 

4.125" 

104mm 

9" 

229mm 

4"/100mm 

4" DIA. POLE 

4" DIA. POLE 

PCA-C (CONTEMPORARY) 

Rotatable photocell housing. The photocell can be aimed 

away from stray light sources for an accurate setting. 

The photocell is also shielded from light emissions from 

the fixture. The housing slips over a 4"/100mm o.d. pole. 

a fixture or arm slips over the 4"/100mm o.d. tenon. 

Includes an internal twist lock receptacle, and an access 

cover with integral lens and stainless steel tether. Adds 

4.5"/114mm to the overall height of the pole/fixture 

assembly. Prewired on the load side and line side for 

easy installation. Photocell by others. 

PCA-T (TRADITIONAL) 

Rotatable photocell housing. The photocell can be aimed 

away from stray light sources for an accurate setting. The 

photocell is also shielded from light emissions from the 

fixture. The housing slips over a 4"/100mm o.d. pole. a 

fixture slips over the 4"/100mm o.d. tenon. Includes an 

internal twist lock receptacle, and an access cover with 

integral lens and stainless steel tether. Adds 5"/125mm to 

the overall height of the pole/fixture assembly. Prewired 

on the load side and line side for easy installation. 

Photocell by others. 

EGRESS 

2 styles to complement product: traditional and contemporary 

Contemporary Traditional Illumination 

14.5" 

363mm 

8.6" 

216mm 

12" 

300mm 

9" 

225mm 

Slips over top of pole 

Rotatable 

360 0 

4.9" 

122mm 

Secures to pole with 

six (6) stainless 

steel screws 

Secures to pole with 

three (3) stainless 

steel screws 

CONTEMPORARY EGRESS ADAPTER - EPA-C 

The Contemporary Egress Post Top Adapter can be 

integrated into an existing non-egress-fitted pole application 

to provide code-required egress illumination. This adapter 

features 360° rotation for easy field adjustments. It also 

features an adjustable bracket that can be positioned 

between 15-45 degrees, so concise, direct illumination can 

be provided onto the path of egress. The Egress PTA is 

wired to an auxiliary 120 volt power source that activates the 

lower-wattage MR16 in the event of an emergency or power 

interruption. The housing slips over a 4"/100mm O.D. pole. It 

includes an access cover with an integral lens and a lanyard 

safety cable. The contemporary model is 14 1/2" tall, but only 

adds 3 5/8" to the overall height of the pole. Prewired on both 

the load side and line side for easy installation. 

TRADITIONAL EGRESS ADAPTER - EPA-T 

The Traditional Egress Post Top Adapter can be 

integrated into an existing non-egress-fitted pole 

application to provide code-required egress illumination. 

This adapter features 360° rotation for easy field 

adjustments. It also features an adjustable bracket that 

can be positioned between 15-45 degrees, so concise, 

direct illumination can be provided onto the path of 

egress. The Egress PTA is wired to an auxiliary 120 volt 

power source that activates the lower-wattage MR16 in 

the event of an emergency or power interruption. The 

housing slips over a 4"/100mm O.D. pole. It includes an 

access cover with an integral lens and a lanyard safety 

cable. The traditional model is 12" tall, but only adds 

3 5/8" to the overall height of the pole. Prewired on both 

the load side and line side for easy installation. 


Photocell options 

PHOTOCELL SWIVEL 

(BPC12 & BPC27) 

photocells 

POLE TOP 

POLE 

4" O.D. OR 5" O.D. 

12" 

300mm 

LOCKING TYPE 

PHOTOCONTROL 

(BY OTHERS) 

ISOMETRIC VIEW 

PHOTOCONTROL 

TWIST LOCK 

RECEPTACLE ASS'Y. 

PHOTOCELL SWIVEL 

(BPC12 & BPC27) 

BPC12 - BPC27 

Swivel type photocell with 

adjustable swivel for aiming. 

Requires field wiring. 

Consult factory for specific fixture 

availability. 

Other Accessories 

POST TOP FIXTURES ONLY 

PHC 

Button type photocell and cast 

shield. Standard location is 12" 

down from top of pole. Inline 

with hand hole. 

Specify voltage. 

PCR 

Low profile twist lock photocell 

receptacle with cast pole cap top. 

Secures to the top of the pole with 

three stainless steel set screws. 

Photocell by others. 

.8125" 

21mm 

12" 

305mm 

18.5" 

470mm 

3" 

75mm 

6" 

150mm 

1" 

25mm 

10" 

250mm 

14.5" 

370mm 

13" 

330mm 

.75" 

20mm 

.4375" DIA 

11mm 

mounting hole 

(2) places 

LR 

Ladder rest. Slips over a 

4"/100mm O.D. pole 

RBC 

FH 

Flag holder. (Specify location 

on pole) 

PLT 

Plant Hanger. 

For 4"/100mm O.D. poles. (Specify 

location on pole, holds up to 25 lbs.) 

For 4" OD or 5" OD pole. 

2.50" 

64mm 

3.25" 

83mm 

Hand 

hole 

Top of pole 

standard 

location 

12 " 

300mm 

POLE TOP 

POLE 

POLE TOP 

SADDLE 

WATER PROOF 

COVER 

2 5/8" 

66mm 

7 1/8" 

178mm 

4" 

100mm 

3" 

75mm 

S/S SET SCREWS 

(6)-PLACES` 

5.50" 

140mm 

24.0" 

610mm 

GFI DUPLEX 

RECEPTACLE 

4" O.D. POLE 

FRONT VIEW 

SIDE VIEW 

RBC 

Cast aluminum receptacle housing, 

integrally welded to the pole. 

Includes a NEC approved clear 

weatherproof U.L.Listed in-use cover. 

Does not include a receptacle or 

internal wiring. 

(Standard RBC is 24" below the 

top of the pole. Consult factory 

for alternative locations, which 

may require additional factory 

reinforcement) 

GFI (with RBC) 

Ground Fault Interrupter. Wet location 

receptacle. Standard location is 24" 

down from top of pole. Inline with hand 

hole. 

FS1 

Single weatherproof fuse holder. Fuse 

by others. 

FS2 

Double weatherproof fuse holder. Fuse 

by others. 

Note: Fuse supplied and installed by others. 

AD4 

This adapter is used with AAL arms 

and post top fixtures designed to be 

installed on 5"/125mm O.D. poles. It 

adapts the fixture to a 4"/100mm pole 

or arm. 

AD5 

This adapter is used with AAL arms 

and post top fixtures designed to be 

installed on 4"/100mm O.D. poles. 

It adapts a 4"/100mm fixture to a 

5"/125mm pole or arm. 

88 


acCessories 


banner arms 

breakaway arms 

Replacement 

REPACEMENT L 

coupling 

COUPLING 

12", 18", 24" 

or 30" TH 

Arm Length 

BBS 

catalog no. 

banner arms 

BBS4-12 

BBS4-18 

BBS4-24 

BBS4-30 

BBS5-12 

BBS5-18 

BBS5-24 

BBS5-30 

BBD4-12 

(2) 

BBD4-18 

(2) 

BBD4-24 

(2) 

BBD4-30 

(2) 

Single assembly for 4" O.D. pole, 12" arm. 








Replacement 

Twin assembly REPLAL PLCEMEN for EN T 4" O.D. pole, 12" arms. 

coupling COUPLING 

Twin assembly for 4" O.D. pole, 18" arms. 

12", 18", 24" 

ARM or 30" LENG 

ENT NHT 

Arm Length 

Twin assembly BSQ for 4" O.D. pole, 24" arms. 

12", 18", 24" 

" 

or 30" 

Twin Arm Length TH 

assembly for 4" O.D. pole, 30" arms. 

catalog no. 

banner arms 

BSQ4-12 Single assembly for 4" SQ. pole, 12" 

arm. 


arm. 


arm. 


arm. 

Side view 

Twin Assembly 

Replacement 

REPACEMENT L 

coupling 

COUPLING 

Replacement 

REPACEMENT L 

coupling 

COUPLING 

Replacement 

REPLAL PLCEMENEN 

T 


Replacement 


T 


Replacement 

REPACEMENT L 

coupling 

COUPLING 

BBS 

12", 18", 24" 

or 30" TH 

Arm Length 

BBS 

Single Assembly 

12", 18", 24" 

or 30" TH 

Arm Length 

BBS 

Replacement 


T 


12", 18", 24" 


ENT NHT 

Arm Length 

BSQ 

12", 18", 24" 

or 30" 

" 

Arm Length TH 

12", 18", 24" 


ENT NHT 

Arm Length 

BSQ 

BSQ 

or 30" 

" 

Square TH Pole 

12", 18", 24" 

Arm Length 

12", 18", 24" 

or 30" TH 

Arm Length 

BBS 

12", 18", 24" 


ENT NHT 

Arm Length 

Side view 

BSQ 

Twin Assembly 

Side view 

Twin Assembly 

POLE 

12",18",24" 

or 30" 

Arm Length 

12", 18", 24" 

or 30" 

" 

Arm Length TH 

BANNER 

description 

Side view 

Twin Assembly 

BBD 

Twin Assembly 

BBS (2) 

Two Arms 

BREAKAWAY BANNER ARMS- 

DOUBLE 2-BBS ( ) OR SINGLE BBS) ( 

CLAMPS ON TO A (SPECIFY POLE. POLE DIA.) 

ADJUSTABLE TO DESIRED POSITION. 

Round AAL banner arms are clamshell designs for 4"/100mm or 5"/125mm diameter poles. Banner arm for square 

pole is secured to the side of the pole with two bolts. The banner arms are easily added or removed from the pole. The 

breakaway coupling is designed to fail before over-stressing the pole. An internal, stainless steel cable keeps the arm 

attached to the pole assembly. 

The failure point for the coupling is affected by the banner size, pole height and vertical location of the banner on the pole. 

The loading is also affected by securing the banner at the top only, or the top and bottom. Contact the factory for the 

maximum banner size recommended for your application. 


colors 

Standard Colors 

AWT 

Arctic White 

Standard Colors 

Colors are for reference only, as monitor 

or printer configuration may distort and/or 

change color appearance. Contact a local 

representative for a color chip 

LGY 

MAL 

MDG 

ATG 

Light Gray 

Matte Aluminum 

Medium Gray 

Antique Green 

VBL 

Verde Blue 

WRZ 

Weathered Bronze 

DGN 

Dark Green 

CRT 

Corten 

BRM 

Metallic Bronze 

DBZ 

Dark Bronze 

BLK 

Black 

MTB 

Matte Black 

Premium Colors 

Premium Colors 

Colors are for reference only, as monitor 

or printer configuration may distort and/or 

change color appearance. Contact a local 

representative for a color chip. 

SFM 

WCP 

Seafoam 

Weathered Copper 

SHK 

Shamrock 

All Standard and premium AAL colors available. For 

RAL and custom colors, please submit a four-digit RAL 

number or color chip for custom colors. 

SPP 

Salt & Pepper 

90 


ALN445-TRA1L 



92 

Architectural Area Lighting 

16555 East Architectural Gale Ave. | Area City Lighting of Industry | CA 91745 

T 626.968.5666 16555 East | F Gale 626.369.2695 Ave. | City | of www.aal.net/aal/polesarms711.html 

Industry | CA 91745 

T 626.968.5666 | F 626.369.2695 | www.aal.net/aal/polesarms.html 

© 2011 Architectural Area Lighting | Design Patents Pending | 

© 2012 Architectural Area Lighting | Made Design in Patents the USA Pending | POLES/ARMS | Made in 711 the USA | POLES & ARMS 312

and Accessories

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?