Bright steel

End machining unit.
Red-hot steel on
its way through the
hardening system.
End machining Manufacturing of short lengths Heat treatment
We provide bright steel cutting and end
The combinations in end machining can be
In our short length production we manufacture
For specific customer demands and selected
machining at our integrated end machining
selected as required between rough-turning,
bright steel in segments of 25 mm to 2000 mm
applications, our bright steel products can be
centre. Workpieces are processed with
centering, facing and end machining to
for further processing according to our
submitted to heat treatment.
diameters between 8 mm and 60 mm and
customer drawings on request.
customers’ demands. The steel is cut, deburred,
lengths between 25 mm and 2000 mm with
rough-turned, faced, chamfered, centered
We are in the position to conduct stress relief
a maximum piece weight of 25 kg. Depending
We also offer the following supplementary
and degreased on high-duty automatics. In
annealing, soft annealing, spheroidizing
on the machine used, the lengths which can
services: washing, length determination,
addition to the above, features relating to
and normalizing within a temperature range
be cut are 10 mm, 50 mm or 120 mm.
straightness testing, degaussing, weight
process safeguarding can be checked.
between 560 °C and 900 °C in a controlled
Length tolerances are ± 0.15 mm or ± 0.25 mm –
recording, stamping and packaging.
atmosphere.
likewise depending on the used machine.
Depending on customers’ needs, the
manufactured short pieces can be either
For highest demands on strength we can
packaged as bulk freight or in customer-
quench and temper round and hexagonal
Standard with commercial lengths
owned containers by means of fully automatic
packaging systems. This enables both large
cross sections as well as tubes on our single
bar induction hardening systems.
+C (K), +SH (SH),
+SL (SL)
Chamfering and
facing
Round
in mm
6 – 75 (100)
Square
in mm
8 – 40
Hexagon
in mm
8 – 70
Chamfer
22.5°, 30°,
45°, 60°
Standard
length in mm
2000 – 6000
and small shipping units.
These facilities enable the setting of mechanical
and technological properties, which cannot be
achieved through conventional means.
Chamfering, facing
10 – 70
8 – 36
10 – 70
22.5°, 30°,
2000 – 6000
and centering
45°, 60°
Tapping max. 30 mm
on request
on request
22.5°
2000 – 6000
16 17