|

More documents

Recommendations

Info

The rail has a diameter of 88.9 mm and is made of galvanized high-grade steel, which gives it a stainless surface that is capable of “self-repairing” minor damage. The posts are 1.950 mm high and are easily erected in the ground to bring the final height of the railing up to 705 mm. Double-sided 2P DU A new product has joined the Birsta ranks. The new Birsta 2P DU boasts double rails along both sides of the posts. This railing has been designed for use where there is traffic on both sides, e.g. in parking lots and as a centre divider on roads. About Birsta 2P Product Containment Working Distance between Severity level width posts level 2P N2 W4 3 metres A 2P N2 W3 1.5 metres A 2P * N1 W3 3 metres A 2P DU * N1 W3 3 metres A 2P DU N2 W4 3 metres A *Test TB11 in compliance with the Swedish Road and Street Design manual (VGU).
Different ends for different means Birsta 2P is available with three different guardrail end treatments: Exit and entrance reinforcements, available in a long version (12 m) and a short version (6 m). Pedestrian and cycling path guardrails In addition to the new Birsta GC (please see the Birsta GC brochure), we are also pleased to continue to offer an old favourite, the Birsta 2P GC. See the image above for a clear picture of how these pedestrian and cycling path guardrails look! Birsta 2P GC is available with vertical end treatments and with a closed entrance and exit design. Hot-dip galvanizing Vertical end treatments. Expansion joint between Birsta 3P and 2P. Type C end treatments. No other surface treatment provides more long-lasting rust protection at such a low cost as hot-dip galvanizing. In typical urban environments, a hot-dip galvanized surface has a maintenance-free service life of more than 40 years. This is why Birsta uses hot-dip galvanizing in the majority of its products. There are many examples of steel structures that are more than 60 years old and still enjoy good rust protection thanks to the hot-dip galvanizing process. Dipping the steel in melted zinc provides it with excellent rust protection even in tight spaces and on the inside of the pipes. Our galvanizing plant houses a zinc melt measuring 8.2 x 1.2 m, with a depth of 2.2. m. Hot-dip galvanized products withstand mechanical damage very well and are also capable of “self-repairing” minor damage themselves through a galvanic process. Considering the fact that some 6 billion Euros are “rusted away” every year in the Swedish industrial sector, hot-dip galvanizing can be a real cost-cutter!
Page 1 and 2: Nobody makes guardrails like Birsta
Page 3: Easily mounted Ingenious attachment

|

Create successful ePaper yourself

Delete template?

Save as template?