FM TRANSMIT CATALOG - Ecreso

Powerful
SAVINGS
Save with Built-In Functionality:
• Modular Audio Inputs and Silence Detect
• Advanced Automatic Switching
• Audio Backup
• Digital Stereo Encoder
• Embedded FM Limiter
• Dynamic RDS Encoder
• SFN
Modular Audio Inputs & Silence Detection
The new line of Ecreso FM Transmitters is fully equipped
with 2 MPX/SCA and 2 audio inputs as standard. MPX/SCA
Inputs can be used for a complete MPX/composite signal, or
to feed the transmitter with RDS or other subcarriers. The
Ecreso FM uses a modular audio input structure supporting
both analog and AES audio inputs.
This flexibility allows maximum compatibility with the
different connections at the transmitter site.
All of the inputs include silence detectors so you monitor in
real time the status of your program inputs, as well as send
automatic notifications/alarms in case of any signal loss.
Advanced Automatic Switching
Based on the silence detection feature described above, the
Ecreso FM can automatically switch from a main source to
a backup. Simple configuration can enable comprehensive
customization: silence threshold, delay (main to backup
and backup to main), as well as priorities of each source,
including the MPX inputs.
The loss of an RDS input signal can also be detected and
automatically switch on (the internal) RDS encoder. As a
result, you get the maximum reliability for your signal and
reduce hardware costs and complexity.
Audio Backup
The Ecreso FM Transmitter includes audio backup via a micro SD card (TCP/IP board required). If the
audio input is lost, this feature provides additional security and protects against dead air. The audio
backup is presented as an integrated 5th audio input and you can choose from up to 20 audio files in
MP3 or WAV format while ID3 tags can feed the Radiotext tags of the internal RDS encoder. An alarm
can be automatically sent by the unit to inform the engineer of an audio source failure.
13