website

WIRE HANDLING HARDWARE
The "EZ" Twist Lock Printed Circuit Board Supports feature a uniquely designed locking base which is easily
snapped into the chassis by hand. Cables and wires can be loaded and unloaded with a simple twist of the fingers, and
are supported above the board eliminating possible contact with hot components. Parts are stocked in natural Nylon 6/6.
Other colors can be furnished with a slight extra charge.
HOLE SIZE .187” • PANEL THICKNESS .030”/.078”
SECTION
VII
ITEM NUMBER DESCRIPTION A B C MAX
23EZS0250N0954
23EZS0450N0030
23EZS0200N0030
23EZS0375N0030
23EZS0450N0625
23EZS0625N0028
.250 BUNDLE DIA.
.450 BUNDLE DIA.
.200 BUNDLE DIA.
.375 BUNDLE DIA.
.450 BUNDLE DIA.
.625 BUNDLE DIA.
.954 (24.23)
.028 (0,71)
.011 (0,28)
.050 (1,27)
.625 (15,88)
.028 (0,71)
.876 (22,25)
1.180 (29,97)
.844 (21,44)
1.066 (27,08)
1.184 (30,07)
1.270 (32,26)
.276 (7,01)
.453 (11,51)
.205 (5,21)
.350 (8,89)
.453 (11,51)
.620 (15,75)
The "EZ" Twist Lock Supports on Adhesive Base offer a
economical way of routing wires with out the need for mounting
holes or screws. Cables and wires can be loaded & unloaded with
a simple twist of the fingers. Also includes a release tab for easy
quick installation.
ITEM NUMBER A B C MAX D E
23EZABS450TAB
23EZAB450TAB
23EZAB580TAB
1.070 (27,18)
.190 (4,83)
.190 (4,83)
2.149 (54,58)
1.230 (31.24)
1.400 (35.56)
.450 (11,43)
.450 (11,43)
.580 (14,73 )
1” (25,40)
1” (25,40)
.870 (22,10)
1” (25,40)
.520 (13,21)
.520 (13,21)
1 8 3
M&E
815-730-0555
www.megroupinc.com