SL - SERIE LUCE 40 - 63A

Trunking components and
additional elements
Depending on the different installation requirements
Zucchini can provide various technical solutions:
a) Flexible joint: used to make changes of direction or
to avoid possible interferences that may be found on
the natural path of the busbar. The features are as
follows:
• same connection method as the straight elements;
• electrical and mechanical connection with one
operation;
• degree of basic protection IP40 (IP55 with joint
covers and outlet covers);
• continuity of the protective conductor, made from the
casing of the element itself, guaranteed by tightening
the special connection screw;
b) cable trunking with cover: this accessory, which can
be positioned on the upper or lower part of the
busbar, can be used to distribute auxiliary circuits. It is
an integral part of the busbar by using special spacers
and brackets which hold the busbar trunking system
firmly.
The end cover completes
the installation of the lines
and guarantees the degree
of protection of the line.
32A tap-off boxes with
transparent cover for modular
circuit breakers –
4 DIN modules.
Ring clamp for
hanging lighting or
suspension of the
busbar with chain
or wire cable.
Snap-on bracket.
■ PARTS OF THE LINE
Tap-off box
Flexible joint
64 SL - SERIE LUCE