RANDCASTLE COMPOUNDING

More documents

Recommendations

Info

Batch Mixer Cooling Experiments 4.3 RPM 2.5 Minutes 3.0 Minutes 4.0 Minutes ~11 Revolutions ~13 Revolutions ~17 Revolutions 1% red color concentrate followed by LDPE pellets was fed into the Randcastle SFEM-BM-1000-4 10 gram batch mixer. The mixtures were cooled in place before removal from the rotor. These were laid flat above. It is remarkable how fast the mixing took place. Imagine the improved mixing at 100 rpm.
1% Color Concentrate & LDPE Film From SFEM Elongator Screw Strand From SFEM Batch Mixer Our Randcastle SFEM batch mixers conveniently extrude a strand. In many cases, there’s no need to spend time scraping molten samples off the rotor. Here, a film made with an SFEM Elongator screw and the SFEM batch mixer, perhaps not surprisingly, look the same.
Page 1 and 2: RANDCASTLE COMPOUNDING These pictur
Page 3 and 4: RANDCASTLE COMPOUNDING Index By Mat
Page 10 and 11: Coloring Vinyl Film Flexible PVC pe
Page 12 and 13: Single Screw vs. Twin Screw Co-Cont
Page 14 and 15: Mixing 1,000 Times Better 10 = 5 Th
Page 16 and 17: Ceramic Nano-Composites PMMA Pellet
Page 18 and 19: 1% Carbon Nano-Tubes In Lignin Comp
Page 24 and 25: 5% Carbon Nano-Tubes In PMMA This s
Page 26 and 27: 5% Carbon Nano-Tubes In Acetal Cond
Page 28 and 29: 0.018 inch hole for monofilament Di
Page 30 and 31: Direct Extrusion: RPVC Powder & Woo
Page 32 and 33: Melt Temperature RPVC Pellets 1 Inc
Page 34 and 35: PVC 95/72 Durometer PVC Barrier Scr
Page 36 and 37: 35% Calcium Carbonate Powder Compou
Page 38 and 39: Scaling From SFEM Batch Mixer To SF
Page 40 and 41: Injection Molded 10-90 PS-HDPE Inje
Page 42 and 43: Randcastle’s AFEM Recirculator Su
Page 44 and 45: Surface Expands Exponentially 1 1)
Page 46: Randcastle’s SFEM Elongator Addit

RANDCASTLE COMPOUNDING

Create successful ePaper yourself

Delete template?

Save as template?