FORAGE COMPACTOR 6700

FORAGE COMPACTOR 6700
MID-CAPACITY DOMESTIC & EXPORT FORAGE PRESS
INCREASING EFFICIENCY
w w w . h u n t e r w o o d . c o m

Higher Quality Bales
Innovation at its Finest
The FC6700 is an innovative machine designed to compress baled hay and loose hay into high
density bales. With the ability to compress higher than field bale density, storage and transport are
more effectively optimized.
The compact construction of the FC6700 fits easily into a production facility and is fully automated.
Each press is designed with an on-line monitoring system for reports on production, machine statistics,
downtime, management reports by shift and plant management reports.
The FC6700 is designed to produce;
Ÿ a 43” X 45” X 26” average compressed
bale at 330 kg
Ÿ (109 cm x 114 cm x 66 cm at 727 lb)
Ÿ *see page 4 for bale weights and tons per hour chart.
Big Bale Grid Slicing System This slicing
system is a standard component of the FC6700
press. Hay bales are pushed through a set of
stationary blades to slice hay cleanly and
accurately.
FC6700 Input Conveyer
www.hunterwood.com -2- forageinfo@hunterwood.com

FC6700
Create a custom plant layout to produce a blended product.
FC6700 Press Details
Full Automation
The PLC is controlled from the operators platform and
provides up to the second reporting of production, pressures,
temperatures and can monitor third party equipment
integrated into your Hunterwood machine.
Loose Hay Input
Options to include a Loose Hay Sweep or additional
conveyors to add blending capabilities are available.
Consuming loose hay can reduce waste and increase output
efficiency.
www.hunterwood.com
-3-
forageinfo@hunterwood.com

FC6700 Press Details
FC6700 FEATURES
MINIMAL STAFF REQUIREMENTS
INPUT
One to two people can operate the machine under normal plant conditions.
The FC6700 comes standard with a Grid Slicing Input System. The customer will choose their Grid
Slicing System based on their most often consumed field bale. The Grid Slicing box is available to
accommodate 1 of 3 input bale sizes: a) 26”, b) 36”, OR c) 48”.
HUNTERWOOD ONLINE
Available online access of press and component diagnostics. This program provides detailed shift-byshift
production and down time reports to assist the plant manager's ability to obtain consistent press
operation at peak efficiency. Hunterwood Online allows for real time monitoring from any location.
STANDARDIZATION
OUTPUT ROLLERS
All FC6700 presses come with a standard input system, mixing conveyor, scaled batch conveyor,
heaper, compression chamber, and eject chamber. These devices allow for consistent bales to
achieve maximum transportation weights in high cube shipping containers at a low cost.
Output bales are ejected from the press onto roller conveyors that allow for easy pick-up with a forklift.
Hunterwood FC6700 General Specifications
PRODUCTION SPEED
POWER SUPPLY REQUIREMENT
INPUT BALE SIZE
OUTPUT LOG SIZE
OIL COOLING SYSTEM
BALE WEIGHT
15 Metric Tons/Hour (Sprint Rate)*
3-Phase Power Or Diesel Generator
Accepts 2x4x8 OR 3x4x8 OR 4x4x8 Square bales OR Loose forages
43” wide X 45” long X 26” high, (109 cm X 114 cm X 66 cm)
Air-to-Oil Heat Exchanger
330 kg (727 lb) in quality Alfalfa
*Production rates, bale weights and densities are subject to moisture content, material compressibility and other variables.
High-Cube Container Loading
10 rows x 8 bales
= 80 bales per container
@ 330 Kg/727 Lbs*
= 58,160 Lbs
= 26.4 MT
*in quality Alfalfa
Contact us for more information: 1.403.932.7767 | www.hunterwood.com | forageinfo@hunterwood.com
-4-