BASF defoaming explanaiton

Water-borne
coatings
Solvent-free
coatings
Description/application
- - polyurethane, acid-cure and NC wood finishes
- - acid-cure and NC-curtain coating systems, unsaturated polyester and gelcoats
- - polyurethane, acid-cure and stoving enamels
- - thin layer gel-coat, room temperature cured unsaturated polyesters, casting resins and epoxy resin systems (e.g. floorings)
- water-borne coatings, strong silicone-free defoamer for both millbase and letdown
- - unsaturated polyester, epoxy and polyurethane systems
- water-borne coatings and inks, good performance in surfactant containing formulations
- - polyurethane curtain coatings and stoving enamels
- - polyurethane, acid-cure and NC wood finishes
- - physically drying systems and air-drying alkyds
- - polyurethane, acid-cure systems, NC wood finishes and stoving enamels
- air-drying systems based on acrylic, vinyl and chlorinated polymers
- - physically drying systems and medium to long oil air-drying alkyds
- - polyurethane, acid-cure and NC wood varnishes, good compatibility
- - solvent-borne industrial and decorative finishes, including roller, brush and airless spray applications
- water-borne industrial coatings
- water-borne coatings and pigment concentrates where high shear processing or application exists
- water-borne coating systems containing low surfactant levels
- water-borne clear coat applications, water-borne pigment concentrates
- water-based acrylic, low PVC and baking systems, water-borne pigment concentrates
- UV curing and EBC systems
- solvent-free epoxy- and polyurethane systems
- solvent-free epoxy- and polyurethane systems, low odor, high solid 2k systems and solvent-free radiation curing systems
* Dosage: % w/w on total formulation ** Typical values, not intended as specification
06 07