MANAGEMENT

The LMS allows for switching and dimming of the PRESTIGE
luminaires. The primary control interface is a tailor-made GUI
used on a tablet. There are two modes of operation: general and
individual. A push-button wall panel was installed as a secondary
control interface.
An additional feature of the solution is the provision of a special
router that, when connected to the existing DHCP network,
allows for remote administration of the lighting system. This
enables us to monitor the system or modify its programming at
any time according to customer request. By including this feature,
the system is prepared for the future in terms of its being open to
maintenance and adjustment as needed.
In general mode, all luminaires are switched and dimmed
together using buttons with predefined parameters.
In individual mode, each group of luminaires can be independently
switched and dimmed using buttons and sliders, with current
dimming values shown below each slider. The groups follow
the pattern of the luminaire layout, with each of the 15 rows of
luminaires forming one group.
The interface also allows for the saving and subsequent selection
of up to five user-defined lighting scenes that can be recreated
at any time using the buttons along the bottom of the screen.
Primary control interface: tailor-made GUI designed for use on a tablet.
Secondary control interface:
push-button wall panel.
PRESTIGE LED LSK PRESTIGE LED II LIGHTING MANAGEMENT SYSTEMS
PRESTIGE LED 100 /101