brochure.compressed (1)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Controller<br />
Controller (DCSC)<br />
La Marche’s DC System Controler (DCSC) is an intelligent module that monitors and manages<br />
La Marche DC power systems. The controller provides the system with Battery Management,<br />
Energy Conservation, Rectifier Management, Intelligent Battery Hibernation Mode, Battery<br />
Testing, Battery Charging, and Current Limiting controls.<br />
System configuration settings and real-time parameters can be accessed either locally (through<br />
a two-line LCD display), or remotely (through a Web User Interface).<br />
Controller Indicator Description<br />
Indicator<br />
Color<br />
Status<br />
Description<br />
1<br />
2<br />
3<br />
Off<br />
Controller OFF<br />
Run<br />
Indicator<br />
Minor Alarm<br />
Indicator<br />
Major Alarm<br />
Indicator<br />
Green<br />
Yellow<br />
Red<br />
Blinking at<br />
0.5 Hz<br />
Blinking at<br />
4 Hz<br />
Off<br />
Steady On<br />
Off<br />
Steady On<br />
Controller communicating properly<br />
Controller ON but not communicating<br />
properly<br />
No minor alarm(s)<br />
Minor alarm(s) generated<br />
No critical or major alarm(s)<br />
Critical or major alarm(s) generated<br />
(1) Run Indicator<br />
(2) Minor Alarm Indicator<br />
(3) Major Alarm Indicator<br />
(4) Control Buttons<br />
(5) USB port<br />
(6) RS485/RS232 Port<br />
(7) Handle<br />
(8) Locking Latch<br />
(9) Fast Ethernet (FE) Port<br />
(10) LCD<br />
DCU I/O Interface Module<br />
Equipped with the I/O module (DCU), the controller supports configurable digital inputs,<br />
alarm dry-contacts and site sensor ports for environment management and alarms reporting.<br />
The DCU I/O module provides the ability to add multiple sensors for: ambient temperature,<br />
humidity, water, door status, smoke and battery temperature. The dry-contacts alarm are<br />
configurable and can be customized upon the DC system’s requirements. All alarms can be<br />
easily configured and monitored remotely through the WebUI (Web User Interface).<br />
DCU Port Description<br />
Port Type Silk Screen Description<br />
Sensor Port<br />
TEM-HUM<br />
WATER<br />
Ambient Temp. and humidity sensor<br />
Water Sensor<br />
Ambient Temperature Sensor 1<br />
Dry Contact Input<br />
NOTE: For details about<br />
the signal definitions, see<br />
the power system user manual<br />
Dry Contact Output<br />
NOTE: For details about<br />
the alarms associated with dry<br />
contact outputs, see the power<br />
system user manual<br />
Communication Port<br />
TEMP1<br />
TEMP2<br />
GATE<br />
SMOKE<br />
BTEMP<br />
DIN1<br />
DIN2<br />
DIN3<br />
DIN4<br />
DIN5<br />
DIN6<br />
ALM1<br />
ALM2<br />
ALM3<br />
ALM4<br />
ALM5<br />
ALM6<br />
ALM7<br />
ALM8<br />
COM<br />
Ambient Temperature Sensor 2<br />
Door Status Sensor<br />
Smoke Sensor<br />
Battery Temperature Sensor<br />
Dry Contact Input 1<br />
Dry Contact Input 2<br />
Dry Contact Input 3<br />
Dry Contact Input 4<br />
Dry Contact Input 5<br />
Dry Contact Input 6<br />
Dry Contact Output 1<br />
Dry Contact Output 2<br />
Dry Contact Output 3<br />
Dry Contact Output 4<br />
Dry Contact Output 5<br />
Dry Contact Output 6<br />
Dry Contact Output 7<br />
Dry Contact Output 8<br />
RS485 Port<br />
4
Change language