Price Book > USA > June 2012 - Groupe Lacasse

CONCEPT 3 CONCEPT 70 CONCEPT 400E CONCEPT 300 PANgrAm
Unique non-handed collection in a
contemporary style and reversible.
• Exclusive anodized aluminum legs
• Choice of laminate or Translucent doors
• Optimized storage solutions
• Easy to specify
HUTCHEs
• All hutches are equipped at work surface height with a full-width flexible wire
access extrusion (except for Concept 300).
• A grommet is also provided on the back panel of the hutch to accommodate
an optional task light unit.
• Depending on the hutch model, the clearance is 16¾" to 2113 /16" (426 to 579 mm)
from the work surface level.
• Combination of rails and tackboards available for use with hutches. Refer to page 173.
dOOrs
All hinges for Concept 400E, Concept 70, PanGram and Concept 300 collections are 120°.
for other collections, hutches have 120° hinges while other units have 135° hinges.
BOOKCAsE
Bookcase must be placed against a wall or back-to-back to another unit.
PEdEsTALs
All mobile pedestals 18" deep can receive a cushion (LGC-CU1518). Refer to page 175.
USA – jUNE 2012
Classic, durable executive office
furnishings.
• Choice of 2 handles
• 3 accent colors
• Over 350 components
• Choice of 3 edges
Quintessential classic office
furnishings.
• Choice of 3 handles
• Over 300 components
dimENsiONs
Metric dimensions shown in this price book are exact; imperial dimensions are nominal (unless
otherwise specified).
TACKBOArds
Included with all tackboards is a Velcro strip or hardware for fastening to walls.
CHOiCE OF LEg PANELs
A
B
C
d
E
Unique manufacturing parameters that
offer exceptional value.
• ¾ height modesty panel
• Recessed back to accommodate
walls with electrical outlets
• Choice of 2 handles
• Horizontal wood grain
• Standard choice of 5 colors
• 100% Quickship
1" (25 mm) 1½" (38 mm) 1" (25 mm) 1" (25 mm) 1" (25 mm)
3 ⁄32" (3 mm) 3 ⁄32" and 5 ⁄32" (3 and 4 mm) 3 ⁄32" (3 mm) 3 ⁄32" (3 mm) 3 ⁄32" (3 mm)
Tfl Tfl Tfl Tfl Tfl
N/A 44" (1099 mm): 21¼" (543 mm)
36" (900 mm): 17 3 /8" (445 mm)
full-height on TD desks with ¾ (19 m)
clearance from floor.
Half-height on y-shape surfaces.
Optional back panel are not available.
44" (1099 mm): 21½" (546 mm)
36" (900 mm): 17 5 /8" (448 mm)
44" (1099 mm): 26½" (673 mm)
36" (900 mm): 18 5 /8" (473 mm)
full-height full-height Recessed 6" (150 mm) on all desks;
except for modesty panel on curved
desks with metal pedestals, which
is recessed 9" (225 mm). ¾ height
overlaps exterior side panels of
furniture, and full height overlaps
on low-profile desks.
N/A full-height full-height Recessed 1" (27 mm). ¾ height recessed
on exterior side panels of furniture.
N/A Back panel and side panel: full-height Back panel and side panel: full-height Symmetrical corner module: full-height
back. Extended corner module: ¾ height
back panel overlaps along the extended
portion and recessed 1" (27 mm).
F
Solution for space division with
laminate panels.
• 2 accent colors
• Compatible with Lacasse furnishings
• Several freestanding units complete
the collection
• Easy to specify and to install
36" (900 mm): 19" (483 mm)
28" (710 mm): 17 5 /8" (448 mm)
full-height
PiCTOgrAms
Pictograms are intended for informative purposes only and cannot be used from a technical
point of view. for further information, contact the Groupe lacasse customer service department.
N/A
Back panel and side panel: full-height
gENErAL sPECiFiCATiONs
7