EUROSTEEL 2008 - ECCS Publications - E-store
EUROSTEEL 2008 - ECCS Publications - E-store
EUROSTEEL 2008 - ECCS Publications - E-store
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
II<br />
Volume A<br />
Cold formed sections<br />
Tests and design of stainless steel lipped channel section columns 39<br />
Barbara Rossi, Jacques Rondal, Serge Cescotto, Kim J.R. Rasmussen<br />
Deformation capacity design of stainless steel lipped channel columns 45<br />
Barbara Rossi, Kim J.R. Rasmussen<br />
Application of the direct strength method to stainless steel lipped channel section columns<br />
failing by combined distortional and flexural-torsional buckling 51<br />
Barbara Rossi, Jacques Rondal, Kim J.R. Rasmussen<br />
Direct strength method compared to EN 1993-1-3 - Design concepts for thin-walled plain<br />
channels in coupled instabilities 57<br />
Bettina Brune, Dieter Ungermann<br />
Nonlinear analysis of thin walled cold formed steel platforms 63<br />
Konstantinos Tzaros, Euripidis Mistakidis, Phillip Perdikaris<br />
Performance of built-up cold-formed steel beams assembled with mechanical and laser<br />
welded connections 69<br />
Raffaele Landolfo, Gianmaria Di Lorenzo, Francesco Portioli, Maria Rita Guerrieri<br />
Behaviour of continuous purlins of lapped cold-formed Z–sections and bolted on<br />
intermediate supports 75<br />
Viorel Ungureanu, Dan Dubina<br />
Experimental procedure, modeling the distortional behavior of Z-purlins in sandwich panel<br />
roofs 81<br />
Mircea Georgescu, Viorel Ungureanu<br />
Rotational restraint by profiled sheeting - An extensive set of Peköz tests validating<br />
existing numerical models 87<br />
Luc Schueremans<br />
Deep trapezoidal sheeting with perforated webs - An experimental research program 93<br />
Sándor Ádány, Mansour Kachichian, László Dunai<br />
Moment distribution on continuous beam from corrugated sheeting 99<br />
Aleš Ježek, Tomáš Vraný<br />
Non-linear curling in cold-formed steel panels 105<br />
Nuno Silvestre<br />
GBT stability analysis of a slender LiteSteel beam section member 111<br />
Pedro D. Simão<br />
The effect of mode coupling on DSM - Parametric studies on the buckling resistances of<br />
various cold-formed cross-sections 117<br />
Sándor Ádány, Zoltán Beregszászi
Change language