GLOBAL CATALOG 05-04-2016

CHEMICALS
SUPER GLUE
SUPER GLUE
DR. BOND PLASTIC BONDER
• SPECIALLY DESIGNED FOR A FASTER, LONG-
LASTING BOND
• EASILY APPLIED AND WORKS ON NONPOROUS
MATERIALS INCLUDING METALS, PLASTICS,
RUBBER, VINYL, PAPER, WOOD AND TEXTILES
• PERMANENT, TRANSPARENT BOND FILLS
GAPS TO 0.004"
• REPAIRS ANY AUTOMATIC PLASTIC
• NO MIXING REQUIRED
• PREPARE THE SURFACE WITH THE
ACTIVATOR, APPLY THE BONDING
AGENT AND BOND TO THE PARTS
LINE CODE PART NO. SIZE CASE PK
PTX 82190 2 g TUBE CARDED 12
ITEM
LINE CODE PART NO. SIZE CASE PK
PTX 82565 2 g TUBE AND 2.9 mL BOTTLE 6
SUGGESTED APPLICATION
SUPER GLUE
Automotive Trim, Logos, Knobs, Gear Shift Logos and Minor Interior Repairs
DR. BOND
HIGH TEMPERATURE
• TWO PART, HAND KNEADABLE, PUTTY
TYPE INDUSTRIAL STRENGTH TITANIUM-
REINFORCED EPOXY IN STICK FORM
WHICH IS USED TO BOND AND REPAIR
METALLIC MATERIALS THAT WILL BE
EXPOSED TO HIGH TEMPERATURES.
• CONTRASTING BROWN AND WHITE
COLORED MATERIALS ARE MIXED
TOGETHER TO FORM A UNIFORM GOLDEN
BROWN TITANIUM COLOR TO INDICATE
THOROUGH MIXING.
• AFTER 8 HOURS, HIGH TEMPCAN
BE DRILLED, SANDED, THREADED,
MACHINED OR PAINTED AND IT IS RESISTANT TO WATER
AND MOST SOLVENTS.
• DOES NOT BOND TO POLYETHYLENE AND POLYPROPYLENE
AND IT IS NOT INTENDED FOR STRUCTURAL APPLICATIONS.
LINE CODE PART NO. SIZE CASE PK
PTX 84333 2 OZ. CARDED 12
STEEL WELD
• TWO PART, HAND KNEADABLE, PUTTY
TYPE INDUSTRIAL STRENGTH, STEEL-
REINFORCED EPOXY IN STICK FORM,
WHICH IS USED TO BOND AND REPAIR
METALLIC MATERIALS THAT WILL BE
EXPOSED TO HIGH TEMPERATURES UP TO
500° F.
• SETS IN 5 MINUTES AND CURES IN 1 HOUR
TO A METALLIC STEEL GREY COLOR.
• WHEN FULLY CURED IT CAN BE DRILLED,
TAPPED, MACHINED, LED, AND PAINTED.
• NSF CERTIED SAFE FOR REPAIRS THAT
COME IN CONTACT WITH DRINKING WATER
AND IS A NON-RUSTING, NON-SHRINKING, NON-AMMABLE,
MOISTURE RESISTANT, AND NO VOC FORMULATION.
All Plastics, even Polyethylene and Polypropylene
EPOXIES
PLASTIC BOND
• A TWO PART, HAND KNEADABLE, PUTTY
TYPE EPOXY IN STICK FORM WHICH IS
USED TO BOND AND REPAIR MOST RIGID
AND SEMI- FLEXIBLE PLASTICS.
• RESISTANT TO WATER, CHEMICALS, AND
TEMPERATURES UP TO 300° F, DRIES TO
AN OFF-WHITE COLOR.
• SETS IN 25 MINUTES, AND CURES IN 3
HOURS.
• MADE WITH A NON-SHRINKING, NON-
AMMABLE, AND NO VOC FORMULATION,
CAN BE SAWED, DRILLED, CARVED,
SANDED AND PAINTED WHEN FULLY
CURED.
• NSF CERTIED SAFE FOR REPAIRS THAT COME IN CONTACT
WITH DRINKING WATER.
LINE CODE PART NO. SIZE CASE PK
PTX 84330 2 OZ. CARDED 12
COLD WELD BONDING COMPOUND
• A 15-MINUTE, TWO-PART ADHESIVE
AND FILLER SYSTEM THAT
ELIMINATES THE NEED FOR
WELDING OR BRAZING.
• IT REPAIRS, FILLS AND BONDS TO
IRON, STEEL, BRASS, BRONZE,
ALUMINUM AND COPPER.
• ONCE CURED, IT CAN BE DRILLED,
TAPPED, THREADED, LED, SANDED
AND PAINTED.
• RESISTS MOST AUTOMOTIVE, SHOP
AND CLEANING FLUIDS.
• WITHSTANDS TEMPERATURES TO
300°F INTERMITTENT.
• OVER 3,000 PSI SHEAR STRENGTH
ON STEEL.
LINE CODE PART NO. SIZE CASE PK
PTX 84332 2 OZ. CARDED 12
LINE CODE PART NO. SIZE CASE PK
PTX 14600 2-1 OZ. TUBES, CARDED 12