PACIFIC COAST SIGN SUPPLY - signsearch- the search engine of ...

Clear coatings protect digital prints, vinyl & paint from abrasion, marring, weather and UV exposure while flexible enough for
banners and vehicle graphics (even applied over rivets). Painted surfaces and vinyl signage also benefit from liquid lamination. Clear
coats cut down on peeling by sealing the edges of vinyl graphics and lettering. Signs and banners look more unified and smooth.
ClearShield is your first choice for all non-water-sensitive applications. ClearShield was created using state-of-the-art resins and ultraviolet
inhibitors that protect the substrate, ink, and the clear coating itself. Use ClearJet on most substrates, including canvas, vinyl (enamel
receptive and non-enamel receptive), banners, fiberglass, wood, metal, plastic, and paper. ClearJet is only for water-based inks.
We generally recommend the following dry film thickness:
ClearJet Type S (FA & Original) 370 sq. feet 740 sq. feet
ClearShield Water-based Clears – .7 to 1 mil dry film
ClearJet Solvent-based Clears - .5 to 1 mil dry film
ClearJet Type BR (FA & Original) 485 sq. feet 970 sq. feet
This chart shows you the theoretical coverage at 100% transfer efficiency. Fine Art versions tend to penetrate much more than standard versions so the surface
film build will be lower, yet the protection will be excellent. We strongly recommend that you test before use. A test will immediately show you incompatibilities,
including water sensitivity, ink jet receptive layer mud cracks, and ink bleeds. Generally, let the tested material dry for at least 24 hours. Evaluate the
adhesion, flexibility, and visual appearance. Be realistic in your expectations and simulate the conditions the material will be exposed to.
FROG JUICE CLEAR UV is very glossy, totally synthetic and will not yellow. It achieves maximum hardness slowly
over a period of 30 days, yet is ready to handle and place outdoors in 30 minutes. Frog Juice is normally thinned with mineral spirits, but can be thinned
with naphtha, automotive acrylic enamel reducers, and lacquer thinners. Hot thinners can cause problems without proper testing.
spray quart gallon
7000 Sunscreen Clear $8.95 $25 $94
SEALIT PENS paint pen w/1-Shot UV Clear $9.75 ea
Edge sealer for SignGold & any adhesive backed vinyls
3M VINYL EDGE SEALERS 8oz
3950 Scotchcal edge seal for use on adhesive backed vinyls $19.95
LIQUID LAMINATES
Version Price Use on How to Apply Compatibility
ClearShield Original
water-based
ClearShield Type C
water-based for canvas
ClearJet Original
A2000 Aerosol
solvent-based
aerosol spray
ClearJet Original
Spray or Brush & Roll
solvent-based
ClearJet Fine Art BR
solvent-based
brush or roll for canvas
Cross Linking Agent
CX-100
Gloss quart $26.95, Gal $80.85
Gloss 5 Gal $359
SG quart $27.95, Gal $83.95
Matte quart $30.45, Gal $89.65
Gloss quart $25.95, Gal $68.50
SG Gal $69.95
this price limited to current stock only
Gloss spray $10.95
SG spray $10.95
Gloss gallon $49
SG quart $19, SG gallon $49
this price limited to current stock only
Gloss Gal $69
SG quart $25
this price limited to current stock only
4 ounce $13.65
Quart $109
vinyl, banners, fiberglass, wood,
metal, plastic, paper, solvent-based
inks and most water-based paint
systems
Waterproof canvas applications
(highly flexible). Also suitable for
micro porous substrates to reduce
or eliminate pinholes.
most substrates, incl. canvas, vinyl
(ELK & non ELK), banners, fiberglass,
wood, metal, plastic, and
paper
most substrates, incl. canvas, vinyl
(ELK & non ELK), banners, fiberglass,
wood & metal
made to penetrate the canvas,
making the ink/media combination
more flexible
improves resistance to water, chemical,
impact, abrasion and humidity
page 101
spray, pad or foam applicator, roller.
Always work with full, wet coats.
Use all techniques, including most
automated equipment. Always work
with full, wet coats.
spray 3” - 6” from the surface,
never turn your wrist,
spray past the edge of the print
& over-lap passes
pad applicators, rollers or spray,
6” - 9” from the surface, spray past
the edge of the print & over-lap
pad applicators or rollers; 3/16” nap
roller or a high-density white foam
roller, work with full wet coats
for non-water-sensitive
ink/media combinations
for non-water-sensitive
ink/media combinations
for dye-based inks and
water-sensitive ink/media
combinations
for dye-based inks and
water-sensitive ink/media
combinations
for dye-based inks and
water-sensitive ink/media
combinations
add 10 cc per quart of ClearShield use with all ClearShield
products
per gallon 1 mil dry .5 mils dry
ClearShield (all products) 480 sq. feet 960 sq. feet
pacific coast sign supply® ¥ 503.232.8535 800.752.0028 ¥ pacificcoastsignsupply.com