2016_DSH_sm

Embrace SEG Pop-ups
Pop-ups and Hop-ups
LIFE
TIME
Pop-ups and Hop-ups / Embrace SEG Pop-ups
Embrace is a new
SEG Pop-up system
with push-fit seamless
fabric graphics which
hug a collapsible
lightweight frame.
This gives it a sharp
and crisp image –
a desired look!
NEW
Embrace kits
3x1 EMB-1X3FGE-S / 3x2 EMB-2X3FGE-S
3x3 EMB-3X3FGE-S / 3x4 EMB-4X3FGE-S
- Lightweight, simple assembly,
anodised straight silver frame
- Stabiliser feet on all frames
three quads high
- Perimeter channel bars
connect to frame and hold
push-fit fabric graphic
- Crisp, push-fit fabric graphic
creates clean, straight edges;
comes with front or fully fitted
graphic (with end caps)
- Optional end caps available
- Fitting on top hubs for lights
to slide into
- Rolling carry bag for most units
Easy push-fit fabric
graphics go into channel
Channel bars for insertion
of fabric graphics easily connect
and slide onto collapsible frame
Assembly is simple;
Pop-up the frame, attach the channel
for the graphics and then push the
graphic beading into said channel.
A sophisticated display
in minutes!
Easy snap arms
3x1 kit
EMB-1X3FGE-S
3x2 kit
EMB-2X3FGE-S
Total hardware dimensions (approx.):
2255 (h) x 790 (w) x 328 (d) mm
Depth with stabilising feet 735 (d) mm
Total hardware dimensions (approx.):
2255 (h) x 1523 (w) x 328 (d) mm
Depth with stabilising feet 735 (d) mm
3x3 kit
EMB-3X3FGE-S
3x4 kit
EMB-4X3FGE-S
Total hardware dimensions (approx.):
2255 (h) x 2239 (w) x 328 (d) mm
Depth with stabilising feet 735 (d) mm
Total hardware
dimensions (approx.):
2255 (h) x 2972 (w) x 328 (d) mm
Depth with stabilising feet
735 (d) mm
72