Industry Plant Construction
Industry Plant Construction
Industry Plant Construction
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technical data<br />
LOAD CAPACITY<br />
vERTICAL/HORIZONTAL<br />
kN<br />
Guided high-temperature flat slide support bearing<br />
BEARING TYPE K mm B mm H mm GLIDE PATH in mm<br />
x-direction Y-direction<br />
500/150 T-500/150-GF/HT 255 120 120 —— 35<br />
1000/250 T-1000/250-GF/HT 345 170 125 —— 40<br />
2500/500 T-2500/500-GF/HT 425 220 155 —— 50<br />
Bending in the area of top and base plate shall not occur.<br />
PROPERTIES<br />
Guided bearing for high temperatures, as compact<br />
flat sliding bearing, with high load PTFE-coated<br />
sliding plate, maintenance-free.<br />
MOUNTING<br />
To weld on, as a special design also available as a<br />
screw-on application.<br />
MATERIAL<br />
Steel, St52-3 (1.0570) (SJ355J2G3)<br />
CORROSION PROTECTION<br />
Galvanic zinc-plated (8 - 12 µ), or corrosion protection<br />
coating.<br />
BASE PLATE<br />
One sided embedding for sliding plate.<br />
The lower side is furnished with a 3x45° welding<br />
bevel, which simplifies the welding to the lower<br />
construction layer. Additional centred drills or<br />
threads serve as a mounting assistance.<br />
SLIDING PLATE<br />
Bronze plate with high stress load PTFE-sliding<br />
layer embedded in bearing support.<br />
Friction value: approximately 0,05 - 0,10, on a<br />
stainless steel sliding plate‚ Verf. 2R (IIId).<br />
LOwER TOP PLATE<br />
Steel plate with cleat guide and welded on stainless<br />
steel sliding plate, Verf. 2R (IIId), with protection<br />
film.<br />
Additional centred drills or threads serve as a<br />
mounting assistance.<br />
UPPER TOP PLATE<br />
Steel plate with cleat surrounding for embedding<br />
of the heat isolation plate.<br />
Additional centred drills or threads serve as a form<br />
of mounting assistance.<br />
HEAT ISOLATION PLATE<br />
High pressure-resistant and insulating material,<br />
which prevents overheating of the PTFE-sliding<br />
layer and therefore enables temperature ranges of<br />
up to +500°C.<br />
SLIDING DIRECTION<br />
A guided bearing - one-sided<br />
GLIDE PATH<br />
See chart<br />
CHARACTERISTICS<br />
Suitable for high temperature ranges, ≤ 500°C<br />
Suitable to absorb high siding loads.<br />
Very compact construction, small<br />
measurements (see chart)<br />
Maintenance-free with great durability due to<br />
the PTFE – sliding layer.<br />
High capacity load (stat. approx. 250 N/mm²),<br />
for comparison: solid PTFE - sliding plate<br />
approx. 10 N/mm².<br />
Very compact construction, small<br />
measurements (see chart)<br />
Corrosion resistant<br />
Low friction coefficient, no »stick-slip« effect.<br />
Optimal operational safety<br />
LHG-GleitlagerKomponenten ® GmbH & Co. KG • Stahlgruberring 26 • D-81829 Munich • Tel +49 (0)89-4614951-0 • Fax +49 (0)89-4614951-65 • info@lhg-gleitkomp.de<br />
119<br />
Sliding Bearings for<br />
<strong>Industry</strong> <strong>Plant</strong> <strong>Construction</strong>
Change language