You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Snow blower <strong>TTS</strong>-<strong>250</strong>-1 / <strong>TTS</strong>-<strong>250</strong>-3<br />
Fransgård’s two-stage snow-blower flagship was developed and<br />
tested in close collaboration with Norwegian contractors, which<br />
resulted in a snow blower where capacity, functionality and design is<br />
in perfect harmony.<br />
The interaction of auger (50 cm) and discharge fan (85 cm) provides<br />
high capacity and even speeds without stopping.<br />
The compact chute with lubricatable middle and top hatch ensures<br />
good snow control and unobstructed views for the driver.<br />
The snow-blower chassis is constructed of Domex 420 high-strength<br />
steel in the fan housing and sides, and Hardox 500 plating in skids<br />
and wear steel.<br />
Model: <strong>TTS</strong>-<strong>250</strong>-1 <strong>TTS</strong>-<strong>250</strong>-3<br />
Working width: <strong>250</strong> cm <strong>250</strong> cm<br />
Working width with snow-edge cutter, right/left +15/+15 +15/+15<br />
Working width with hydraulic snow-edge cutter, right +35 cm +35 cm<br />
Discharge fan, diameter 85 cm 85 cm<br />
Discharge fan housing, depth 35 cm 35 cm<br />
Auger, diameter 50 cm 50 cm<br />
Middle hatch Std. Std.<br />
Spring-bolt magazine Std. Std.<br />
3-point suspension, category II/III II/III<br />
Gearbox, RPM 540 540/1000<br />
Gearbox, nominal output on PTO 51 kW 74 kW<br />
Required output 90 HK 90 HK<br />
Pushed/front mounting No Yes<br />
Net weight 1055 kg 1070 kg<br />
Extra accessories are found on page 3 2
Change language