10.01.2017 Views

COMBINERS

PROCOM-Combiners

PROCOM-Combiners

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Combiners<br />

1.Connect PRO-AREL1-12V to PRO-PM2-... to REV ANT and connect<br />

12 V to PRO-AREL1-12V.<br />

2.Adjust the trimming potentiometer on PRO-PM2-... to minimum<br />

(anti-clockwise).<br />

3.Connect a load to the PRO-PM2-... corresponding to the SWR<br />

required, e.g. 25 Ω SWR 2:1.<br />

4.Connect the signal of the required frequency and power to<br />

PRO-PM2-....<br />

5.If the alarm is lighting, press RESET. If the alarm does not stop, adjust the trimming potentiometer on the PRO-<br />

PM2-2/70 to minimum and press RESET.<br />

6.Slowly adjust the trimming potentiometer on the PRO-PM2-...<br />

clockwise until the alarm starts.<br />

Page 112/247

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!