EN_EURO_Wiha-Katalog-gesamt-2017

Stripping tool
Automatic crimp tool
Simplifies your work: Enables stripping in hard-to-reach places such
as installation sockets.
for round cable, in blister pack
Order-No.
36052 125 5 8-13 1
246 77 SB
19,62
Lowers your costs: An integrated lever enables users to interrupt the
crimping process at any time to protect the pliers. Increases your
safety: Safe work through feed aid prevents crimping the plastic cover
of wire-end sleeves. Facilitates your handling: Thanks to hexagonal
crimping, small wire-end sleeves no longer get caught. Increases your
efficiency: Automatic adjustment of wire-end sleeve size with suitable
crimping force for a large coverage area of 0.08-16mm².
for wire-end sleeves hex crimping
Z 62 0 005 06 SB
Order-No.
41246 210 0,08-16 28-5 1 169,00
For processing twin sleeves and wire-end sleeves with or without insulating collar as per DIN
46228 & EN 50027
Crimping pliers Professional electric
Crimp tool
Meets your requirements: Safe pressing in marked trapezoidal/
semi-circular profiles. Lowers your costs: Durable thanks to highquality,
chromed plier surface to prevent corrosion. Offers you full
protection: Each tool individually tested at 10,000 V AC and approved
for 1,000 V AC.
Increases your safety: Safe working through automatic pressing
adjustment.
for insulated cable eyes and contacts
Z 62 0 002 06
Order-No.
35861 145 5 ¾ 5
35862 180 7 5
DIN ISO 5743. Manufactured acc. to IEC 60900:2012.
Z 60 0 06
25,61
32,77
Order-No.
33841 220 0,5-6 20-10 1 98,26
For processing of red, blue and yellow isolated cable eyes, pin-end cable connectors, contact
pins, contact pin sleeves, circular pins, circular pin sleeves, batch connectors and parallel
connectors according to DIN 46234.
150
You can find more products in the Extended product range section.